|
|
|
|
|
|
|
|
|
|
|
|
Dräger Safety has extended its Dräger
X-plore range of masks and filters to
include the X-plore 7300 and X-plore 7500
powered air purifying respirators and the
X-plore 9000 constant flow airline system.
All three can be used with Dräger's range
of X-plore headpieces (helmets, hoods and
visors) and the Panorama Nova Rd40
threaded full face masks can be used with
the X-plore 7000 series.
Respiratory protection without breathing
resistance
The X-plore 7300 and 7500 powered respirators
use a filter to purify the ambient air
and then make it available to the wearer.
The use of an electronically controlled
blower ensures a constant air flow, without
any breathing resistance.
X-plore 7300 is suitable for use in all kinds
of applications where protection against
particles is required – for example during
grinding, woodwork or welding, and in the
agricultural industry.
X-plore 7500 can be combined with different
types of filters and in addition to particles
also provides protection against inhalation
of hazardous gases and vapours (for example
industrial applications such as painting
or agriculture).
Both devices are comfortable to wear thanks
to the combination of ergonomic design
and low weight.
Multifunctional operating panel controls
device functions
The easy to operate multifunctional operating
panel allows the battery status and filter
capacity to be monitored at all times, and
can even be used to adjust the airflow. In
the X-plore 7500, the operating panel can
be individually set at the touch of a button
for use with a full face mask or helmet, hood
or visor. In the X-plore 7300, the airflow
can be set individually for any headpiece.
Audible and visual warning alarms guarantee
utmost safety in any application, ensuring
that the user is alerted immediately if
the filter life is exhausted or the battery
capacity is low. Additionally, the integrated
NiMH battery ensures maximum freedom of
movement.
Dräger X-plore 9000 constant flow
airline system
The X-plore 9000 constant flow airline system
is designed for use in situations where
filtering protection is not sufficient. The
device features a preset manifold fitted to a
belt which can be connected to a pressurized
ring main, a mobile air source or directly
to a compressor.
Broad range of applications thanks to
different headpieces
A wide range of headpieces makes it possible
to use this unit in a broad spectrum
of applications. The short and long hood
are particularly suitable for people with
beards or those who wear glasses or where
complete facial protection is required.
A grinding visor combines respiratory protection
with protection of the eyes, the safety
helmet is used where respiratory protection
is required and helmets are mandatory, and
the welding helmet is available either with
conventional welding glass or with an autodarkening
welding visor.
The X-plore headpiece range is completed
by the Panorama Nova full face mask for
applications requiring a higher protection
factor and simultaneous eye protection. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
Dräger Safety AG & Co. KGaA |
|
|
Revalstrasse 1 |
|
|
23560 Luebeck, Germany |
|
|
|
Tel +49 451 882 0
Fax +49 451 882 2080
|
|
|
|
