Skip Ribbon Commands Skip to main content

Dräger X-am® 2500 MSHA Approved

Dräger’s MSHA approved X-am 2500 accurately detects O2, CO, NO2, SO2 and H2S and is the only 1-4 gas monitor you need for a wide range of applications. The X-am® 2500 combines reliable sensor technology with long battery life and intuitive operation in an instrument that defines safety.

Benefits

Matrix Display


The X-am 2500 has a large, easy to read, liquid-crystal display. All gas readings are shown simultaneously and resize automatically depending on the number of sensors installed. When a gas alarm occurs, the reading for the sensor in alarm will be highlighted and will alternate with the alarm level indication of A1 or A2.

Long-Lasting, Reliable Sensor Technology


The innovative, catalytic Ex sensor has a high degree of drift stability with a high resistance to silicone and hydrogen sulfide. The sensor boasts an expected service life of more than five years and is extremely sensitive to flammable gases and vapors. Further, the X-am 2500 is approved for measuring, according to IEC/EN 60079-29-1, from methane to nonane.

High Capacity Battery


The Dräger X-am 2500 can operate for more than 12 hours with either alkaline batteries or with rechargeable NiMH batteries. Depending on the requirements, the batteries can be charged either in the workshop or in a vehicle. Operating time without an Ex sensor installed is typically more than 250 hours.

Zone 0 Approved


The Dräger X-am 2500 has Ex approval for zone 0 for user safety in areas subject to explosion hazard. Additionally, it is not sensitive to electromagnetic radiation, e.g. from wireless devices and is water and dust resistant in accordance with protection class IP 67.

X-Dock Compatibility


The X-am 2500 is compatible with Dräger’s X-dock testing and calibration station. X-dock is Dräger’s new solution for efficient maintenance and comprehensive equipment management. Used for functional testing and complete documentation, X-dock can complete bump tests in 8 to 15 seconds with more than 40 % less gas consumption than competitive instruments. The X-am 2500 is also compatible with the Dräger Bump Test Station.

Related Products
Dräger X-am® 5600

Featuring an ergonomic design and innovative infrared sensor technology, the Dräger X-am 5600 is the smallest gas detection instrument for the measurement of up to 6 gases.

Dräger X-am® 5000 Personal Monitor

The smallest 5 gas detector available worldwide! Its compact and ergonomic design make the Dräger X-am 5000 the ideal companion for personal protection.

Dräger X-am® 7000

Dräger X-am 7000 is the innovative solution for the simultaneous and continuous measurement of up to five gases.

Dräger X-zone® 5500

Area gas monitoring reinvented. That’s what Dräger’s X-zone® 5500 brings to a worksite: a safer, more effective way to monitor for hazardous gases. In combination with the Dräger X-am® 5000, 5100 or 5600 gas detection instruments, the X-zone 5500 can be used for the measurement of up to six gases and extends the range of your portable gas detection technology exponentially.

Accessories
Calibration gas and accessories

Calibration of equipment will ensure safe operation and functionality of equipment and will also meet with the applicable regulations and codes of practice. Various calibration options are available to provide this facility.

Car charging adapter

 

Calibration cradle

 

Dräger X-am 125, external pump

External pump for hose length of up to 30 meters (98 feet). Makes it possible to use the detector for pre-entry measurements into confined spaces such as tanks, shafts, etc. The pump starts automatically when the detector is inserted. The change between diffusion and pump operation is quickly and easily possible without any need for additional tools or steps.

Power pack & Charging set

Consisting of: NiMH power supply, charging module, single charger

Vehicle charger mounting kit

 

Leather carrying case

 

Components
DrägerSensor XXS

​A small sensor - a giant step into the future: The new DrägerSensor XXS is remarkably compact, and boasts an even higher performance than the competition.

Dräger Catalytic Ex-Sensors

​Multiple gases at the same time: The DrägerSensor Cat Ex measures combustible gases and vapors in the air.

Dräger X-zone® 5500

Area gas monitoring reinvented. That’s what Dräger’s X-zone® 5500 brings to a worksite: a safer, more effective way to monitor for hazardous gases. In combination with the Dräger X-am® 5000, 5100 or 5600 gas detection instruments, the X-zone 5500 can be used for the measurement of up to six gases and extends the range of your portable gas detection technology exponentially.

Dräger Bump Test Station

​Easy to use, stand-alone and flexible: With the Bump Test Station, function tests of gas detection and warning devices can be carried out easily and independently of the location.

Dräger X-dock® 5300/6300/6600

Automatic bump tests, calibration, reduced test gas consumption, short testing times and comprehensive documentation come standard in this new device from Dräger, the experts in gas detection.

Training & Professional Services
Customer Support

How-To´s

How To: X-am 2500 Overview

 


Was this information helpful?
Was this information helpful? Please help us improve our services by letting us know what you think. We value your feedback.
This field requires an input
This field requires an input
This field requires an input The E-Mail address is invalid
This field requires an input
If you require immediate assistance, please contact Customer Service.
Thank you, we appreciate your feedback!

Contact

Draeger Safety Inc.
101 Technology Drive
Pittsburgh, 
PA 
15275-1057
 
+1-800-858-1737
+1-412-787-2207