Dräger Polytron® 3000
Contact usDräger Polytron® 3000
Simple, quick installation
The Polytron 3000 consists of two components, the dockingstation, for mechanical and electrical installation, and the Polytron 3000 transmitter. The dockingstation can be mounted and wired in advance, guarded against rain and dust by a modular cover until time of commissioning. During commissioning, the Polytron 3000 is simply inserted into the dockingstation and secured with a quick lock mechanism. After inserting the sensor, the system is ready for operation.
Wide range of applications
With its exceptional electromagnetic compatibility and a variety of mounting options, the CE marked Polytron 3000 is suitable for many different areas of application ranging from chemical to the semiconductor industries.
Easy to operate and maintain
The operation and maintenance of the Polytron 3000 is easy. The tried and tested DrägerSensor is equipped with an integrated data memory that contains all calibration information. This allows the Polytron 3000 to accept a pre-calibrated sensor, speeding up maintenance or sensor change. If preferred, the sensor can be field calibrated in the transmitter.
Explosion Protection
For global use the Polytron 3000 is approved according to ATEX, IECEx, UL and CSA.
Images and Videos
Downloads
Product information: Dräger Polytron® 3000 (PDF)
The Dräger Polytron® 3000 is an intrinsically safe gas detector for the continuous monitoring of more than 60 toxic gases and oxygen in ambient air. It is the part of a new generation of gas detectors developed on a modular platform. Communication to the central control system is done via a 4 to 20 mA signal.
SIL Brochure, en
Safety Instrumented Systems are used to reduce the risk for the protection of people, plants, and environment.
Fixed gas detectors, sensors and substances
Dräger fixed gas detectors can be used with different sensors and...
Product configurations
for the fixed gas detector Dräger Polytron 3000
Utilise for 46 Substances
16 matching DetectorFGDS
Technical Data
Key Facts
- Type
- Transmitter
- Measuring Principle
- Electrochemical
- Cable entry
- M20
- Display
- ✓
- Intrinsic Safety
- ✓
- Flameproof
- ✗
- Increased Safety
- ✗
- SIL
- ✓ SIL 1 (IEC 61508-2)
- 4-20 mA
- ✓
- Bus
- ✗
- HART®
- ✗
- Wireless
- ✗
Technical Data
- Power Supply
- 12 to 30 V DC, 2-wire
- Temperature (operation)
- -40°C - 65°C
- Humidity
- 0 to 100% r.h., non-condensing
- Pressure (hPa)
- 700 - 1300
- Dimensions (H × W × D)
- 16,6x13,5x12,9 cm
- Weight
- 1,98 lb
- Housing Material
- Glass fibre reinforced polyester (GFRP)
- Degree of protection (IP class)
- IP66
Approvals
- ATEX
- ✓
- IECEx
- ✓
- UL
- ✓
- CSA
- ✓
- CE marking
- ✓
- GOST (EAC)
- ✗
- Performance approval
- ✗
- Shipping approval (MED)
- ✗
Related Products and Associated Offerings
Filter
Dockingstation
For easy and time-saving mounting of the Dräger Polytron® 3000 or 7000. One dockingstation is required for each Polytron® 3000 or 7000.
Duct mount kit
The duct mount kit enables gas monitoring inside ventilation ducts while keeping the transmitter outside.
Gassing adapter
Adapter for permanent gassing and or the calibration of transmitters with electrochemical sensors (not type AC), catalytic sensors (pellistors) and transmitters of type Polytron IR CO2 and Polytron IR ...
Viton calibration adapter
Viton adapter for zero-point tests and the calibration of transmitters with electrochemical sensors (not type AC), catalytic sensors (pellistors) and transmitters of type Polytron IR CO2 and Polytron ...
Sammenlign (0)