dimethyletherC2H6O

CAS-No.:
115-10-6
UN-No.:
1033
EC-No.:
204-065-8
Hazard identification number:
23
Warning sign:
  • 23
  • 1033
Hazard signs
GHS02
GHS04
Occupational exposure limit
BEK nr 670 af 31/05/2018 (Gældende) (DK)
  • TWA (ppm) 1000
  • TWA (mg/m3) 1920
  • H: 220
    Extremely flammable gas
  • H: 280
    Contains gas under pressure; may explode if heated
  • Melting point:
    -141.5 °C
  • Boiling Point:
    -24.8 °C
  • Density (at 20 °C, if not notified otherwise):
    0,0021146 g/cm3
  • Ionization:
    10.025 ± 0.025 eV
  • Flash Point:
    -42.2 °C
  • Ignition Temperature:
    240 °C
  • Vapour Pressure (at 20 °C, if not notified otherwise):
    5100 hPa
  • Lower Explosive Limit:
    2,8 Vol.-%
  • Upper Explosive Limit:
    24,4 Vol.-%
  •  
diamond 4 0 3
Details
Diamond-Red4Flammability: Easily flammable 
Diamond-Yellow0Instability: No danger for normal conditions 
Diamond-Blue3Health: Very dangerous 
DG-EA:2WE

Get in touch with Dräger

If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.

Suitable products for dimethylether C2H6O

Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.

Portable Gas Detectors and Sensors

Multi-gas detector

Dräger X-am® 8000

  • Multi-gas detector
  • ​1- to 7 gas detection device
  • for clearance measurement
  • detection of toxic and combustible gases as well as vapours and oxygen
Multi-gas detector

Dräger X-am® 5600

  • Multi-gas detector
  • ​1 to 6 gas detection device
  • for personal air monitoring 
  • detection of explosive, flammable and toxic gases as well as vapours and oxygen
Infrared Sensors

Dräger Infrared Sensors

  • Infrared Sensors
  • ​monitoring of explosive mixtures and CO2
  • recommended for frequent occurrence of explosive gases
  • compatible with: X-am 5600 / 7000 / 8000
  • measuring range: lower explosion limit up to 100 vol.%, for ...

Fixed Gas Detection and Sensors

Flammable Gas Detectors

Dräger Polytron® SE Ex

  • Flammable Gas Detectors
  • Sensor: Catalytic bead sensor
  • Installation: Increased Safety
  • Interface: 3-wire cable
  • IP class: IP 66
  • Special: Sensing Head
Flammable Gas Detectors

Dräger PEX 3000

  • Flammable Gas Detectors
  • ​Sensor: Catalytic Bead Sensor
  • Installation: with Increased Safety 
  • Interface: 4-20 mA
  • IP class: IP66
  • Special: -
Flammable Gas Detectors

Dräger Polytron® 5200 CAT

  • Flammable Gas Detectors
  • ​Sensor: Catalytic bead sensor
  • Installation: Increased Safety or flameproof
  • Interface: 4-20 mA, Relays
  • IP class: IP 65/66/67
  • Special: Display
Flammable Gas Detectors

Dräger Polytron® 8200 CAT

  • Flammable Gas Detectors
  • ​Sensor: Catalytic bead sensor
  • Installation: Increased Safety or flameproof
  • Interface: 4-20 mA, Relays, Bus, HART ®
  • IP class: IP65/66/67 and SIL2
  • Special: Display
Catalytic bead sensor

Catalytic Bead DrägerSensor®

  • Catalytic bead sensor
  • ​Seamless monitoring of combustible gases and vapours
  • Compatible with: Polytron 8200, Polytron 5200, PointGard 2200, PEX 3000, Polytron SE Ex
  • B121 measuring range: LEL in ...

Filters

Respirator filter Rd40

Dräger X-plore® Rd40

  • Respirator filter Rd40
  • ​standard thread connection Rd40 according to EN 148-1
  • robust aluminium housing
  • to be used with half and full face masks with standard thread connection Rd40 according to EN ...

Masks

Single-filter full-face mask

Dräger X-plore® 6300

  • Single-filter full-face mask
  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of PMMA
  • to be used with all filters with standard thread connection Rd40
Single-filter half-face mask

Dräger X-plore® 4700

  • Single-filter half-face mask
  • ​standard thread connection Rd40 according to EN 148-1
  • mask body made from TPE (universal size) or silicone (two sizes)
  • to be used with all filters with standard thread ...
Single-filter full-face mask

Dräger Panorama® Nova

  • Single-filter full-face mask
  • ​different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
  • EPDM or silicone mask body, ...
Single-filter full-face mask

Dräger X-plore® 6530

  • Single-filter full-face mask
  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of triplex or PC
  • to be used with all filters with standard thread connection ...

Get in touch with Dräger

If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.

Discover more: Dräger VOICE - The hazmat-based safety product finder

You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!

VOICE Hazmat