1,6-Hexamethylene diisocyanateC8H12N2O2
Details
| CAS-No.: | 822-06-0 |
|---|---|
| UN-No.: | 2281 |
| EC-No.: | 212-485-8 |
| Hazard identification number: | 60 |
Warning sign
- 60
- 2281
Hazard signs
Occupational exposure limit
- TWA (ppm) 0.005
- TWA (mg/m3) 0.034
Occupational Exposure Limits may differ for your Province. Review your local Occupational Health and Safety Act for more information.
- H: 302
Harmful if swallowed. - H: 315
Causes skin irritation - H: 317
May cause an allergic skin reaction - H: 319
Causes serious eye irritation - H: 330
Fatal if inhaled - H: 334
May cause allergy or asthma symptoms or breathing difficulties if inhaled - H: 335
May cause respiratory irritation
- P: 260
Do not breathe dust/fume/gas/mist/vapours/spray - P: 285
In case of inadequate ventilation wear respiratory protection. - P: 301 + 310
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician - P: 301 + 312 + 330
Wear protective gloves/protective
clothing/eye protection/
face protection. - P: 302 + 350
IF ON SKIN: Wash with plenty of soap and water. - P: 304 + 340
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. - P: 305 + 351 + 338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. - P: 309 + 311
- P: 403 + 233
Store in a well-ventilated
place. Keep container
tightly closed.
No statement for this group.
No GHS Classification available at the moment.
| Melting point: | |
|---|---|
| Density (at 20 °C, if not notified otherwise): | 1,05 g/cm3 |
| Flash Point: | |
| Ignition Temperature: | |
| Vapour Pressure (at 20 °C, if not notified otherwise): | 0,007 hPa |
| Lower Explosive Limit: | 0,9 Vol.-% |
| Upper Explosive Limit: | 9,5 Vol.-% |
| Hazardous Effects: | Ss, Sr |
Details
| 1 | Flammability: Flammable when heated | |
| 2 | Instability: Strong chemical reactions | |
| W | Special: Do not use water to extinguish (water-reactant) | |
| 3 | Health: Very dangerous | |
| DG-EA: | 3X | |
Also known as:
- 1,6-Diisocyanatohexan
- 1,6-Diisocyanatohexane
- 1,6-Hexamethylendiisocyanat
- 1,6-Hexamethylene diisocyanate
- Basonat H
- C8H12N2O2
- Desmodur H
- Diisocyanatohexan
- HDI
- Hexamethylen-1,6-diisocyanat
- Hexamethylendiisocyanat
- Hexamethylene diisocyanate
- Hexamethylene-1,6-diisocyanate
- Hexandiisocyanat
- Hexane, 1,6-diisocyanato- (CA-Index name)
- HMDI
- OCN-(CH2)6-NCO
Suitable products for 1,6-Hexamethylene diisocyanate C8H12N2O2
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Gas Detection Tubes
Dräger Sampling Tubes and Systems
- Sampling tubes
- analysis of the sample in a laboratory
- measurement of complex compounds and mixtures of substances possible
- detection of low concentrations possible
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- can be used in explosive areas
- highly visible end of measurement indicator
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Filters
Dräger X-plore® Bayonet Filter
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore ...
Dräger X-plore® Rd40 Filter
Masks and Filters
Dräger Panorama Nova®
- Single-filter full-face mask
- different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
- EPDM or silicone mask body, ...
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection - lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
