This website uses cookies. By using the website you agree to our cookie policy. You can change your cookie settings in your browser.Find out more

Dräger Flame 2000

​Working in areas with combustible gases, vapors, or materials requires fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. Flame 2000 uses an advanced infrared (IR) and optical sensor to provide maximum sensitivity to carbon dioxide spectral bands.

The Cost-Effective Multi-Talent

​The Dräger Flame 2000 uses advanced flame analysis tools to quickly detect hydrocarbon-based fuel and gas fires. With the capability to provide early warning of flaming fires at 4.5 μm, and its immunity to false alarms caused by other IR sources, the Flame 2000 is the right choice for those who want more performance for less.

Tough and Intelligent

​The Flame 2000 is one of the most weather resistant single IR flame detectors currently available on the market. It comes with new features such as a heated window to eliminate icing and condensation, HART® capabilities for digital, lower power requirements, and a compact, lighter design.

Reliability

​Functional safety is a concept applicable across all industry sectors. It is fundamental to enabling complex technology and provides assurance that the safety-related systems will offer necessary risk reduction. The Flame 2000 is highly reliable and complies with the IEC 61508 Safety Integrity Requirements of SIL2.

Automatic and manual optics checks (BIT)

​Automatic checks of the detector electronics and optics helps ensure that no fault goes undetected. Additionally, the test can be triggered manually at any time.

Easily visible status LED

​A tri-colored LED on the front of the detector provides a simple status indication to personnel in close proximity. Green indicates normal operation, yellow indicates a fault, and red indicates the presence of radiation from a fire.

Simple installation and commissioning

​Installation is simple! The detector is easily installed with a stainless steel tilt mount, enabling the detector to be rotated up to 60° in all directions. This offers flexibility in positioning the detector in relation to potential fire sources.

Further benefits and features:

  • ​Sensitivity selection—to ensure no zone crossover detection
  • Automatic and Manual Built-In-Test (BIT)—to ensure continued reliable operation
  • Heated window—for operation in harsh weather conditions (snow, ice, condensation)
  • Multiple output options for maximum flexibility and compatibility
  • 3 Relays for Alarm, Fault and Auxiliary
  • 0–20 mA (stepped)
  • HART® Protocol for maintenance and asset management
  • RS-485, Modbus compatible
  • Approved to Safety Integrity Level 2 (SIL2—TÜV)
  • Ex approvals for worldwide application: ATEX, IECEx, FM/FMC, CSA
  • 3rd party performance tested: EN54-10 (VdS), FM3260

Downloads

Product Information: Flame 2000,en
Product Information: Flame 2000,en

Working in areas with combustible gases, vapors, or materials requires fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation.

Download

Dräger Flame 2xx0 Host Software VC
Dräger Flame 2xx0 Host Software VC

Download

Technical Data

Key Facts

Field of view
Horizontal 90°; Vertical 90°
Response time
Typically 5 seconds
Cable entry
2 × 3/4" – 14NPT or 2 × M25 × 1.5 mm
Detection Technology
IR
Flameproof
Increased Safety
SIL
✓ (SIL 2)
4-20 mA
HART®
RS-485
Relay

Fuel ft / m

n-Heptane / Gasoline
50 / 15
Diesel Fuel / JP5 / Kerosene
37 / 11
Ethanol 95 %
25 / 7.5
Methanol
25 / 7.5
IPA (Isopropyl Alcohol)
25 / 7.5
Hydrogen
Methane
29.5 / 9
LPG
29,5 / 9
Polypropylene Pellets
37 / 11
Ammonia
Silane
Office Paper
20 / 6

Technical Data

Power Supply
24 V DC
Temperature (operation)
-55°C - 75°C
Humidity
0 to 95 % r.h., non-condensing
Dimensions (H × W × D)
0.33x0.38x0.52 ft
Weight
6.17 lb
Housing Material
Stainless steel SS 316 or Heavy duty copper free aluminum, red epoxy enamel finish
Degree of protection (IP class)
IP66/67

Approvals

ATEX
IECEx
UL
CSA
CE marking
GOST (EAC)
Performance approval
Shipping approval (DNV & MED)
FM

Compare with related ProductsShare

Get in touch with Dräger

Contact Us Image Safety Products

Draeger, Inc. – Safety

7256 S. Sam Houston W Pkwy., Suite 100
Houston, TX 77085

1-800-437-2437