This website uses cookies. By using the website you agree to our cookie policy. You can change your cookie settings in your browser.Find out more

Dräger Flame 2100

​Working in areas with combustible gases, vapors, or materials requires fire/flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation. The Drager Flame 2100 is a single spectrum optical detector using an ultra-violet sensor to detect flames, while eliminating interference from solar-radiation and other non-fire UV sources.

Budget-Friendly and Always Reliable

​The Dräger Flame 2100 uses advanced flame analysis tools to quickly detect a wide number of flames. These include: hydrocarbon- based fuel and gas fires, invisible hydrogen flames, fires from hydrides, ammonia, silane and other organics. Together, with its ability to detect a flash fire in less than 200 msec, nothing remains unnoticed.

Tough and Intelligent

​The Flame 2100 is one of the most weather resistant UV Flame Detectors currently available on the market. It comes with new features such as a heated window to eliminate icing and condensation, HART® capabilities for digital, lower power requirements and a compact, lighter design. The Flame 2100 comes with a built-in test option (BIT).

Reliability

​Functional safety is a concept applicable across all industry sectors. It is fundamental to enabling complex technology used for safety-related systems. It provides assurance that the safety-related systems will offer the necessary risk reduction. The Dräger Flame 2100 is highly reliable and complies with the IEC 61508 Safety Integrity Requirements of SIL2.

Automatic and manual optics checks (BIT)

​Automatic checks of the detector electronics and optics helps ensure that no fault goes undetected. Additionally, the test can be triggered manually at any time.

Easily visible status LED

​A tri-colored LED, which is visible at the front of the detector, provides a simple status indication to personnel in close proximity to the detector. Green indicates normal operation, yellow indicates a fault, and red indicates the presence of radiation from a fire.

Simple installation and commissioning

​Installation is simple! The detector is easily installed with a stainless steel tilt mount, enabling the detector to be rotated up to 60 degrees in all directions. This offers flexibility in positioning the detector in relation to potential fire sources.

Further benefits and features:

  • ​Solar blind UV spectrum design
  • Fast Response—200 msec response to saturated signal
  • Automatic and Manual Built-In-Test (BIT)—to ensure continued reliable operation
  • Heated window—for operation in harsh weather conditions (snow, ice, condensation)
  • Multiple output options for maximum flexibility and compatibility
  • 3 Relays for Alarm, Fault, and Auxiliary
  • 0–20 mA (stepped)
  • HART® Protocol for maintenance and asset management
  • RS-485, Modbus compatible
  • Approved to Safety Integrity Level 2 (SIL2—TÜV)
  • Ex approvals for worldwide application: ATEX, IECEx, FM/FMC, CSA
  • 3rd party performance tested: EN54-10 (VdS), FM3260

Downloads

Flame 2100 (UV) Product Information, en-us
Flame 2100 (UV) Product Information, en-us

Working in areas with combustible gases, vapors, or materials requires fire/ flame detection as a life-saving necessity. The best solutions must combine state-of-the-art technology with rugged durability and be ready to reliably work in any situation.

Download

Dräger Flame 2xx0 Host Software VC
Dräger Flame 2xx0 Host Software VC

Download

Technical Data

Key Facts

Field of view
Horizontal 100°; Vertical 95°
Response time
Typically 3 seconds
Cable entry
2 × 3/4" – 14NPT or 2 × M25 × 1.5 mm
Detection Technology
UV
Flameproof
Increased Safety
SIL
✓ (SIL 2)
4-20 mA
HART®
RS-485
Relay

Fuel ft / m

n-Heptane / Gasoline
50 / 15
Diesel Fuel / JP5 / Kerosene
37 / 11
Ethanol 95 %
37 / 11
Methanol
25 / 7.5
IPA (Isopropyl Alcohol)
37 / 11
Hydrogen
33 / 10
Methane
50 / 15
LPG
50 / 15
Polypropylene Pellets
33 / 10
Ammonia
Silane
22 / 7
Office Paper
20 / 6

Technical Data

Power Supply
24 V DC
Temperature (operation)
-55°C - 75°C
Humidity
0 to 95 % r.h., non-condensing
Dimensions (H × W × D)
0.33x0.38x0.52 ft
Weight
6.17 lb
Housing Material
Stainless steel SS 316 or Heavy duty copper free aluminum, red epoxy enamel finish
Degree of protection (IP class)
IP66/67

Approvals

ATEX
IECEx
UL
CSA
CE marking
GOST (EAC)
Performance approval
Shipping approval (DNV & MED)
FM

Compare with related ProductsShare

Get in touch with Dräger

Contact Us Image Safety Products

Draeger, Inc. – Safety

7256 S. Sam Houston W Pkwy., Suite 100
Houston, TX 77085

1-800-437-2437