Compare

Dräger Pac® 6500

Single Gas Detectors
  • Reliable non-disposable single-gas detection device for CO, H2S, SO2, O2
  • for personal air monitoring
  • Robust design, tolerating extreme conditions
The H2S sensor of the Pac 6500 can measure concentrations from 0.4 to 100 ppm.
Dräger Pac® 6500 Single Gas Detectors
The single-gas monitor with O2 sensor.
The Pac 6500 with SO2 sensor.
With the Dräger Bump Test Station you can carry out functional tests using a test gas cylinder in just a few seconds.
The Pac 6500 can easily handle even extreme conditions
Dräger Pac® 6500 Single Gas Detectors
Dräger Pac® 6500 Single Gas Detectors
Compare

Boosting your safety with our portable gas detectors: Where trust meets technology

Quick Links
Specifications
Accessories
Downloads
Explore all substances
Single-Gas Detector
Sensor type
1
Number of gases
3.74 oz
Weight
CO, H2S, O2, SO2
Substances
See all relevant substances
Open full specifications

Highlights

​The robust Dräger Pac® 6500 is your reliable companion under tough conditions. The personal single-gas detection device measures CO, H2S, SO2 or O2 quickly and precisely. Quick sensor response times and a replaceable battery also ensure safety.

Strong performance for maximum safety

​You can rely on the Dräger Pac 6500: the personal single-gas detection device warns against hazardous concentrations of carbon monoxide, hydrogen sulfide, sulfide dioxide or oxygen with precision and reliability.

Powerful sensors with a very low t-90 More Information

Easy handling thanks to clear user guidance

​The D-Light indicates whether functionality of the device has been tested and whether it is ready to use. The housing is also designed with your safety in mind: each sensor variant of the Dräger Pac 6500 features clearly visible color coding, thereb More Information

Robust design – even for the toughest conditions

​The Pac 6500 is easily handled in even extreme conditions. Depending on the sensor, temperatures from -40 °C to 55 °C and air pressures between 700 and 1,300 mbar can be tolerated.

A membrane filter protects the sensor from foreign matter such as dus More Information

User-friendly display with all important information

​The large display clearly indicates the respective gas concentration. Other important information, such as the battery capacity, is also displayed. The bright backlighting ensures that all values are clearly legible in the dark.

360° alarm with various functions

​If the Dräger Pac 6500 measures hazardous gas concentrations, it sets off an audible, visual and perceptible vibrating alarm. Two bright, flashing LEDs on the top and bottom of the device ensure that the alarm is easily visible from all sides. The a More Information

Data logger and event logger for analyses and reports

​The Dräger Pac 6500 logs concentrations and events along with the date and time. The data can be loaded on a PC via an interface and processed further there.

Economical operating costs

​All versions of the Pac 6500 are equipped with extremely durable DrägerSensors and a powerful battery.

The Pac 6500 is protected against water, dust and other foreign bodies by a special membrane filter. When the filter becomes heavily soiled in use, More Information

Fast function test saves time and money

Function tests and calibrations can be carried in the Dräger X-dock® calibration station. The automatic bump tests in the X-dock are a cost-efficient and convenient solution thanks to the short test duration and the extremely low consumption of test  More Information

Specifications

Single-Gas Detector
Sensor type
1
Number of gases
3.74 oz
Weight
CO, H2S, O2, SO2
Substances
See all relevant substances

Key Facts

Sensor type
Single-Gas Detector
Measurable gases
CO, O2, H2S, SO2
Number of gases
1
Lifetime
unlimited

Application

Personal Air Monitoring

Technical Data

Temperature range (device)
-40°F - 131°F
Battery service life
2 years (24/7)
Air humidity (relative humidity) in %
10% to 90%
Air pressure (hPa)
700 - 1300
Degree of protection (IP class)
IP 68
Weight
3.74 oz

Features

Changable filter
easy to change from outside / mechanical connection
D-light
TLV / STEL
Peak
Dual sensor
Alarm Hold

Approvals

ATEX
I M1 Ex ia I Ma II 1G Ex ia IIC T4 Ga (Zone 0)
IECEx
Ex ia I Ma Ex ia IIC T4 Ga
c CSA us
Class I, Zone 0, AEx ia IIC T4 Ga, Class II, Division 1, Group E, F, G
CE
GOST (EAC)
Performance approval
Shipping approval (MED)

Dräger VOICE
Your hazmat-based safety product finder

Access relevant information and specific safety equipment recommendations for more than 1,500 hazardous substances.

See the whole Product System.

This product is part of a Dräger system solution. Combine it with the following system components.

System Components

Calibration and Bump Testing - Dräger Bump Test Station
Dräger Bump Test Station
  • Functionality tests of gas detection and warning devices
  • Easy to use, stand-alone, and portable
More Information
Calibration and Bump Testing - Dräger X-dock® 5300/6300/6600
Dräger X-dock® 5300/6300/6600
  • Provides full control of portable Dräger gas detection instruments
  • Automatic bump tests and calibrations
  • Comprehensive documentation and evaluations
More Information
Sensors for Portable Gas Detectors - DrägerSensor® XXS
DrägerSensor® XXS
  • Miniature electrochemical sensors
  • monitoring of toxic gases and lack of oxygen
  • compatible with: Pac series and X-am family
  • measuring range: in vol.-% and ppm
More Information

Accessories

Calibration Adapter
Calibration Adapter

​The communication module (including USB cable) is used to connect the equipment to the configuration and evaluation software. The module is also used for the manual bump test or manual calibration. The test gas is introduced to the Pac device through the gas inlet or outlet.

Calibration and Bump Testing - Calibration gas and accessories
Calibration gas and accessories
  • Ensures safe operation and functionality of equipment
  • Offers various calibration gas options.
  • Meets applicable regulations and codes of practice
More Information

Software

Portable Gas Detection Software - Dräger Gas Vision Software
Dräger Gas Vision Software
  • Enables saving measurement results and configuring gas detection instruments
  • Provides detailed analysis of data collected by portable gas detectors
More Information
Portable Gas Detection Software - Gas Detection Connect
Gas Detection Connect
  • Digital system connecting individual Dräger products for optimal equipment management
  • Provides real-time position and status of gas detection equipment
More Information

Need Software Updates?

Software updates for this product are available in the download area.
Downloads
Next Steps

Get in touch with Dräger

smiling woman
Draeger, Inc. – Safety
7256 S. Sam Houston W Pkwy., Suite 100 Houston, TX 77085