Dräger PointGard 2700
- Sensor: IR Sensor
- Installation: Non-explosion proof
- Interface: 4-20 mA, Relays
- IP class: IP 54
- Special: Self-contained gas monitor, remotely mounted Dräger PIR 7000
With its stainless steel 316L enclosure and drift free optics, the Dräger PIR 7000 is built for the harshest industrial environments such as offshore installations. The unique 4 beam signal stabilizing system makes the sensor resistant to dust or dirt deposits on the optical surfaces. Environmental and ageing effects are largely compensated ensuring long term, drift free operation. The integrated gas library with more than 70 gases provides a high degree of application flexibility. Each of the gases listed there can be picked from the menu and automatically cross-calibrated with a standard calibration gas such as methane or propane.
Thanks to its innovative splash guard and waterproof enclosure, the PIR 7000 sensor is ready for extreme conditions such as areas with daily high-pressure wash-downs and extreme temperature and humidity levels. It is available with an aluminum or 316L stainless steel junction box.
PointGard can accommodate additional external alarm devices through its three built-in relays. In addition, a 4–20 mA signal with HART® output allows integration into a larger gas detection system.
PointGard’s glass fiber reinforced polyester housing is water and dust resistant with a 4X/IP66 rating. Its compact size allows it to easily fit most applications. Built-in cable glands make it easy to install.
The large, illuminated backlit graphic display shows status information clearly and in a format that's easy to use. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Colored LEDs (green, yellow, and red) provide additional alarm and status information. Advanced diagnostics log events and gas readings, which can be displayed and a graph created on the display.
The Dräger PIR 7000 sensor is designed to be installed in Zone 1 classified hazardous areas remotely from the PointGard 2700 with a four-conductor shielded cable up to 30 meters (98 feet) long. The cable and Dräger PIR 7000 sensor must be ordered separately from the PointGard 2700.
Utilise for 35 Substances
7 matching SensorFGDS
- Response time
- Cable entry
- Intrinsic Safety
- Increased Safety
- 4-20 mA
- Power Supply
- 100 - 240 V AC 50 - 60 Hz or 10 - 30 V DC
- Temperature (operation)
- -4°F - 122°F
- 0 to 95% r.h., non-condensing
- 700 - 1300
- Dimensions (H × W × D)
- 0.84x0.92x0.39 ft
- 8.38 lb
- Housing Material
- Glass fibre reinforced polyester (GFRP)
- Degree of protection (IP class)
- CE marking
- GOST (EAC)
- Performance approval
- Shipping approval