Dräger Polytron® 8200 CAT
Contact usDräger Polytron® 8200 CAT
Fast and stable – the DrägerSensor® Ex
The built-in DrägerSensor® Ex is based on the proven catalytic bead measuring principle. It has excellent long-term stability with outstanding poison resistance. And this is the reason for its durability. Due to the novel gas inlet opening, the sensor responds to gas in only a few seconds. This allows you to react immediately with countermeasures and prevent the development of a flammable atmosphere.
Easy device management via digital communication
The Dräger Polytron 8200 is equipped with digital interfaces allowing for quick and easy remote interrogation of the transmitter’s state. Integration with existing asset management systems such as PACTware™ is possible via DTM. In addition to the common HART® communication system, the fieldbus interfaces PROFIBUS® PA, FOUNDATION fieldbus™ H1, and Modbus RTU are also available.
Same design, same operating principle
The Dräger Polytron 8200 belongs to the Polytron 8000 series. All transmitters in this series have the same design and user interface. This allows for uniform operation with reduced training and maintenance requirements. The large graphic backlit display shows status information clearly and in an easy to use format. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Colored LEDs (green, yellow and red) provide additional alarm and status information.
The Polytron 8200 is operated by means of a magnetic wand over contact surfaces.
Three relays for controlling external equipment
Upon request, the Dräger Polytron 8200 can also be supplied with three integrated relays. This enables you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm. Audible alarms, signal lights or similar devices can thus be controlled locally without an additional cable between the transmitter and central controller.
Safe, robust housing for every application
Polytron 8200 features a Class I, Div. 1 rated explosion proof enclosure made from aluminium or stainless steel, making it suitable for a wide range of environmental conditions.
Make the impossible possible with the remote sensor
A remote explosion proof junction allows installation of the sensor up to 350' away from the transmitter in difficult to access areas. A permanently attached remote calibration adapter allows for remote bump testing or calibration from the Polytron display by using permanently attached tubing that takes the calibration gas to the sensor.
Data logger
The Polytron 8200 has a data logger, which records measuring and event data from prior years. A graph function displays the history of the past 15 minutes on a time/concentration graph.
Images and Videos
Downloads
Polytron 8200 Product Information, en_us
PolySoft V1.21.0 Setup
Polytron 8000 Series Manual 9033828
These instructions for use are provided for informational purposes only. Please always read and comply with the instructions for use delivered with the product.
ATEX PTB 11 1005X and IECEx PTB 11.0005X Clarifiaction usage blind plug gas transmitter Polytron 5xx0/8xx0, en
Limited Manufacturer Guarantee_Garantiekarte Polytron 8100, 8200, 87x0, 8900 9300655 (ed 02), en, de
Fixed gas detectors, sensors and substances
Dräger gas detectors can be used with different sensors to detect a large number of hazardous substances. Check which sensor fits into this detector by searching for a substance. Contact our experts to get more information on our wide portfolio.
Product configurations
for the device Dräger Polytron 8200
Utilise for 30 Substances
7 matching Sensor(s)
Technical Data
Key Facts
- Type
- Transmitter
- Measuring Principle
- Catalytic Bead Sensor
- Response time
- Cable entry
- M20 or 3/4" NPT
- Display
- ✓
- Intrinsic Safety
- ✗
- Flameproof
- ✓
- Increased Safety
- ✓
- SIL
- ✓ SIL 2 (IEC 61508-1-3)
- 4-20 mA
- ✓
- Bus
- ✓
- HART®
- ✓
- Wireless
- ✗
Technical Data
- Power Supply
- 10 to 30 V, 3-wire
- Temperature (operation)
- -40°F - 176°F
- Humidity
- 0 to 100 % r.h., non-condensing
- Pressure (hPa)
- 700 - 1300
- Dimensions (H × W × D)
- 11.02x5.91x5.12 "
- Weight
- 8.82 lb
- Housing Material
- Epoxy coated copper-free aluminum or stainless steel SS 316L
- Degree of protection (IP class)
- IP65/66/67
Approvals
- ATEX
- ✓
- IECEx
- ✓
- UL
- ✓
- CSA
- ✓
- CE marking
- ✓
- GOST (EAC)
- ✓
- Performance approval
- ✓
- Shipping approval
- ✓
- FM
- ✗
Related Products and Associated Offerings
Filter
Dräger Polysoft software
The optional Dräger Polysoft Windows® software is used for configuration, firmware upgrades, diagnostics, and downloading the Polytron's built in datalogger. All from the comfort of your control ...
Duct mount kit
The duct mount kit enables gas monitoring inside ventilation ducts while keeping the transmitter outside.
Pole Mounting Kit
Attach Polytron® 5000/8000 series to a pole or pipe using clamps (not included)
Polytron® Calibration Kit
Basic calibration kit with zero gas cylinder and space for a span gas cylinder. Includes all the needed accessories in a convenient carrying case.
Remote Calibration Adapter DQ
The Remote Calibration Adapter DQ comes with inner thread to connect the sensor...DQ for calibration or bump-test to check the current sensor's sensitivity in areas of poor access.
Remote Calibration Adapter LC
The Remote Calibration Adapter LC comes with inner thread to connect the sensor...LC for calibration or bump-test to check the current sensor's sensitivity in areas of poor access.
Remote Sensor Junction Box
The explosion-proof junction box allows remote mounting of CatEx sensor with cabling lengths over 300 feet. A plug and play sensor interface makes installation easy.
Splash guard
The Splash guard protects the sensor against splash water and dirt.
Compare (0)
