This website uses cookies. By using the website you agree to our cookie policy. You can change your cookie settings in your browser.Find out more

Dräger X-am® 2500

Dräger’s X-am® 2500 accurately detects O2, CO, NO2, SO2 and H2S and is the only 1–4 gas monitor you need in industrial and refinery applications. The X-am® 2500 combines reliable sensor technology with long battery life and intuitive operation in an instrument that defines safety. It is approved for most markets including mining, oil & gas, chemical, fire and hazardous response, government and many other applications.

Multi-gas detector

  • ​1 to 4 gas detection device
  • for personal air monitoring 
  • detection of flammable gases and vapours as well as O2, CO, NO2, SO2 and H2S

Matrix Display

The X-am 2500 has a large, easy to read, liquid-crystal display. All gas readings are shown simultaneously and resize automatically depending on the number of sensors installed. When a gas alarm occurs, the reading for the sensor in alarm will be highlighted and will alternate with the alarm level indication of A1 or A2.

High Capacity Battery

The Dräger X-am 2500 can operate for more than 12 hours with either alkaline batteries or with rechargeable NiMH batteries. Depending on the requirements, the batteries can be charged either in the workshop or in a vehicle. Operating time without an Ex sensor installed is typically more than 250 hours.

X-Dock Compatibility

The X-am 2500 is compatible with Dräger’s X-dock testing and calibration station. X-dock is Dräger’s new solution for efficient maintenance and comprehensive equipment management. Used for functional testing and complete documentation, X-dock can complete bump tests in 8 to 15 seconds with more than 40% less gas consumption than competitive using several 500 – 550 mL/min of gas flow.1 The X-am 2500 is also compatible with the Dräger Bump Test Station.

1 X-dock bump test stated times are typical results; stated gas consumption is based upon calibration gas flow of 0.3 L /minute using X-dock for bump test

Long-Lasting, Reliable Sensor Technology

The innovative, catalytic Ex sensor has a high degree of drift stability with a high resistance to silicone and hydrogen sulfide. The sensor boasts an expected service life of more than five years and is extremely sensitive to flammable gases and vapors. Further, the X-am 2500 is approved for measuring from methane to nonane, according to IEC/EN 60079-29-1.

Zone 0 Approved

The Dräger X-am 2500 has Ex approval for zone 0 for user safety in areas subject to explosion hazard. Additionally, it is not sensitive to electromagnetic radiation, e.g. from wireless devices and is water and dust resistant in accordance with protection class IP 67.

Diffusion or pump

An optional external pump with a hose up to 45 m / 147 ft long is available for use in tanks and shafts or when searching for leaks. The switch from diffusion to pump operation can be handled quickly and easily without tools or screws.

Ergonomic and robust

The Dräger X-am 2500 is comfortably worn thanks to its low weight and ergonomic design and gas can enter the unit from above and from the front—even if the instrument is inside a pocket or if the front gas entry is accidentally covered.

The practical two button control panel and easy menu navigation allow for intuitive operation while the integrated protective rubber coating and sensors not sensitive to shock provide additional safety in case of impacts or vibrations.

Peak value functionality

The X-am 2500 can store the highest gas readings for the Ex and toxic gas sensors and the lowest reading for the O2 sensor. These readings can be easily reset after a gas exposure without having to turn the monitor off and on.

Downloads

X-am 2500 Product Information, en_us
X-am 2500 Product Information, en_us

Download

Portable Gas Detection - Family Brochure, en
Portable Gas Detection - Family Brochure, en

Download

DrägerSensor® & Portable Instruments Handbook (4th Edition), en
DrägerSensor® & Portable Instruments Handbook (4th Edition), en

Since its first edition, for many of you this booklet has become an essential companion that provides valuable assistance in your everyday working life. We are very proud of the extensive positive feedback.

Download

Brochure: Dräger sampling hoses for portable gas detectors
A practical guide for calibrating catalytic bead sensors.
CC-Vision Basic 7.5.4
CC-Vision Software History, en
Disinfection and cleaning of portable gas detection devices
Driver for DIRA and MILO Interface
Gas-Vision Software History, en
Gas-Vision Version 7.3.9
Portable gas detection - Monitoring Solutions
Sales Learning Landscape MGM
Steel Metal Brochure, en-us
TN CatEx Technology general remarks
TN: hoses, flodding times and gases
TN: Overview power supplies and number of charging cradles
Warranty vs guarantee mobile gas detection

Gas detectors, sensors and substances

Dräger gas detectors can be used with different sensors to measure a large number of hazardous substances. Check which sensor fits into this detector by searching for a substance. Contact our experts to get more information.

Search for substance

Please enter a substance

Product configurations

for the gas detector Dräger X-am® 2500

Utilise for 41 Substances

8 matching Sensor(s)

Technical Data

Key Facts

Measurable gases
Ex, O2, H2S, CO or NO2 or SO2
Sensorports
4
Number of gases
1 - 4
Applications
Personal Air Monitoring
Sensor technology
CAT + EC

Technical Data

Operation time
>12h
Dimensions (W × H × D)
0.16x0.43x0.14 ft
Weight
0.49 lb
Battery type
NiMh
Degree of protection (IP class)
IP 67

Features

Dual sensors
CatEx Fullrange
D-Light
Internal pump
X-am Pump
X-zone 5500 Area Monitoring
Bump Test Station
X-dock Station

Approvals

ATEX
I M1 Ex da ia I Ma, II 1G Ex da ia IIC T4/T3 Ga
IECEx
IECExEx da ia I Ma, Ex da ia IIC T4/T3 Ga
c CSA us
Class I Div. 1 Group A, B, C, D, E, F, G T.-Code T4/T3, A/Ex da ia IIC T4/T3 /Ga
CE
GOST (EAC)
PO Ex da ia I Ma X, 0Ex da ia IIC T4/T3 Ga X
Performance approval
Shipping approval (MED/DNV GL)

Compare with related ProductsShare

Get in touch with Dräger

Contact Us Image Safety Products

Draeger, Inc. – Safety

7256 S. Sam Houston W Pkwy., Suite 100
Houston, TX 77085

1-800-437-2437