Dräger X-am^® 5000

• ​1 to 5 gas detection device
• for personal air monitoring 
• detection of flammable and toxic gases and organic vapours as well as oxygen and harmful concentrations

Dräger X-am^® 5600 Personal Monitor

• ​1 to 6 gas detection device
• for personal air monitoring 
• detection of explosive, flammable and toxic gases as well as vapours and oxygen

Dräger X‑am ^® 8000

• ​1- to 7 gas detection device
• for clearance measurement
• detection of toxic and combustible gases as well as vapors and oxygen

Dräger Pac^® 8000

• for personal air monitoring 
• detection of twenty nine different gases - including special gases such as hydrogen, nitrogen dioxide, ozone or phosgene
• non-disposable

Dräger X-am^® 5800

• 1 to 6 gas detection device
• for personal air monitoring 
• detection of flammable gases/vapours, toxic gases as well as oxygen
• System component of Dräger Gas Detection ...

Dräger X-am^® 2500

• ​1 to 4 gas detection device
• for personal air monitoring 
• detection of flammable gases and vapours as well as O₂, CO, NO₂, SO₂ and H₂S

Dräger X-am^® 3500

• ​1 to 4 gas detection device
• for clearance measurement
• detection of flammable gases and vapours as well as O₂, CO, H₂S, NO₂ and SO₂

Dräger X-pid^® 9500

• ​​Selective VOC gas detection
• For frequent testing of toxic & carcinogenic substances
• Laboratory quality results in very low concentrations
• Benzene measurement starting from 50 ...

DrägerSensor^® XXS

• ​monitoring of toxic gases and lack of oxygen
• compatible with: Pac series and X-am family
• measuring range: in vol.-% and ppm

PID sensors

PID sensors are the ideal choice for detecting low concentrations of volatile organic compounds. A PID (photoionization detector) is used to measure hazardous substance groups or can even be adjusted to measure ...

Dräger Catalytic Ex-Sensors

• ​monitoring of explosive mixtures
• high poisoning resistance to silicones and H₂S
• compatible with: X-am family
• measuring range: lower explosion limit up to 100 vol.-%

Dräger-Tubes^® for short-term measurements

• ​results are directly shown at the end of the measurement process
• spot measurement for more than 500 different gases 
• short measurement time: between 5 seconds to 15 minutes

Dräger sampling tubes and systems

• ​analysis of the sample in a laboratory
• measurement of complex compounds and mixtures of substances possible 
• detection of low concentrations possible 

Dräger accuro

• for spot measurements with a limited number of strokes
  
• integrated stroke counter for safe control
• easy to operate with one hand
• can be used in explosive areas 

Dräger Polytron^® 5700 IR

• Sensor: IR Sensor
• Installation: with Increased Safety or flameproof
  
• Interface: 4-20 mA, Relays
• IP class: IP 65/66/67
• Special: display

Dräger Polytron^® 8700 IR

• Sensor: IR Sensor
• Installation: Increased Safety or flameproof
• Interface: 4-20 mA, Relays, Bus, HART ^®
• IP class: IP65/66/67 and SIL2
• Special: Display

Dräger Polytron^® 6100 EC WL

• Sensor: Electrochemical Sensor
• Installation: Intrinsic Safety
• Interface: Wireless
• IP class: 66/67 and SIL2
• Special: Wireless 

Dräger Polytron^® 7000

• ​Sensor: Electrochemical Sensor
• Installation: Intrinsic Safety
• Interface: 4-20 mA, Bus, HART ^®
• IP class: 66/67 and SIL2
• Special: Display

Dräger Polytron^® 8100 EC

• ​Sensor: Electrochemical Sensor
• Installation: Increased Safety or flameproof
• Interface: 4-20 mA, Relays, Bus, HART ^®
  
• IP class: IP65/66/67 and SIL2
• Special: ...

Dräger X-node

• ​suitable for gas monitoring only
• Sensor: Electrochemical Sensor
• Installation: Non-explosion proof
• IP class: IP65

Electrochemical (EC) DrägerSensor^®

• ​Continuous monitoring of toxic gases and oxygen
• Compatible with: Polytron 8100, Polytron 7000, Polytron 6100, Polytron 5100, Polytron 3000, PointGard 2100
• Measuring range: ppm, vol%

Dräger PIR 7000

• ​Sensor: IR Sensor
• Installation: with Increased Safety or flameproof
• Interface: 4-20 mA and Bus, HART^®
  
• IP class: IP66/67 and SIL 2
• Special: Response Time <1 ...

Dräger X-plore^® Bayonet Filters

• Dräger specific Bayonet connection
• lateral position of the filters for an unrestricted field of vision and even weight distribution
• to be used with X-plore 3300 or X-plore 3500 half ...

Dräger X-plore^® 5500

• Dräger specific bayonet connection - lateral position of the filters 
• EPDM mask body, visor made of triplex or PC
• to be used in combination with X-plore Bayonet filters​

Dräger X-plore^® 3300/3500

• ​Dräger specific bayonet connection (twin-filter system)
• mask body made from Soft-TPE or DrägerFlex material (silicon free)
• to be used with X-plore Bayonet filters

Dräger PARAT^® Escape Hoods

- Escape hood in three versions: Industrial or fire escape hood, or both versions in one 

- Simple application in 3 steps

- Approved according to NIOSH 42 CFR Part 84, or EN 403:2004 for fire escape ...

Dräger X-plore^® 8000

• Protection without breathing resistance
• Different breathing filters and head / face pieces available
• Protection class IP65
• No Fit Testing Required

Dräger X-plore^® 8000 Filters

• Particle, gas and combination filters available
  
• To be used with powered air-purifying respirator X-plore^® 8500 or 8700 (EX)
  
• Optional pre- and odor filter
  

Dräger CPS 5900

• ​SCBA worn inside the protective suit
• five suit sizes (S-XXL)
• side zipper
• suit material Zytron^® 500, limited use 

SPC 4700 with CVA 0700

• ​Ventilated splash-protective suits
• Continuous supply of breathing air and cooling airflow (type 3 suit)
• Coated barrier protection material CPM or carrier fleece material CLF
• Limited ...