alpha-Methyl styreneC9H10
CAS-No.: | 98-83-9 |
|---|---|
UN-No.: | 2303 |
EC-No.: | 202-705-0 |
Hazard identification number: | 30 |
Warning sign: |
|
Hazard signs
Occupational exposure limit
ACGIH (US)
- TWA (ppm) 10
- TWA (mg/m3) 48
NIOSH (REL) (US)
- TWA (ppm) 50
- TWA (mg/m3) 240
- STEL (ppm) 100
- STEL (mg/m3) 485
NIOSH (US)
- IDLH (ppm) 700
OSHA (PEL) (US)
- TWA (ppm) C 100
- TWA (mg/m3) C 480
- H: 226
Flammable liquid and vapour
- H: 304
May be fatal if swallowed and enters airways
- H: 317
May cause an allergic skin reaction
- H: 319
Causes serious eye irritation
- H: 335
May cause respiratory irritation
- H: 361fd
Suspected of damaging fertility. Suspected of damaging the unborn child.
- H: 411
Toxic to aquatic life with long lasting
effects
- P: 210
Keep away from heat/
sparks/open flames/hot
surfaces. — No smoking.
- P: 273
Avoid release to the environment.
- P: 280
Wear protective gloves/protective clothing/eye protection/face protection.
- P: 301 + 310 + 331
- P: 303 + 361 + 353
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
- P: 305 + 351 + 338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
No statement for this group.
No GHS Classification available at the moment.
Melting point:
-9.4 °F Boiling Point:
330.8 °F Density (at 20 °C, if not notified otherwise):
0,91 g/cm3Ionization:
8.3 ± 0.1 eVFlash Point:
114.8 °F Ignition Temperature:
833 °F Vapour Pressure (at 20 °C, if not notified otherwise):
2,97 hPaLower Explosive Limit:
0,9 Vol.-%Upper Explosive Limit:
6,6 Vol.-%Hazardous Effects:
Ss
Details
| 2 | Flammability: Flammable when warm | |
| 1 | Instability: Instable when heated | |
| 1 | Health: Low risk. Filter recommended | |
| DG-EA: | 3Y | |
Also known as:
- (1-Methylethenyl)benzene
- .beta.-Phenylpropylene
- 1-Methyl-1-phenylethene
- 1-Methyl-1-phenylethylene
- 2-Phenylpropene
- Alpha methyl styrene
- alpha-Methylstyrene
- Alpha-Methylstyrene Monomer
- AMS
- Isopropenyl benzene
- Isopropenylbenzene
- prop-1-en-2-ylbenzene
- α-Methylstyrene
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for alpha-Methyl styrene C9H10
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Gas Detection Tubes
Dräger sampling tubes and systems
- Sampling tubes
- analysis of the sample in a laboratory
- measurement of complex compounds and mixtures of substances possible
- detection of low concentrations possible
Dräger-Tubes® for short-term measurements
- Short-term tubes
- results are directly shown at the end of the measurement process
- spot measurement for more than 500 different gases
- short measurement time: between 5 seconds to 15 ...
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- can be used in explosive areas
- highly visible end of measurement indicator
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Filters
Dräger X-plore® Bayonet Filters
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore ...
Masks
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection - lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Powered Air Purifying Respirators and Filters
Dräger X-plore® 8000 Filters
- PAPR filters
- Particle, gas and combination filters available
- To be used with powered air-purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odor filter
Dräger X-plore® 8000
- Powered Air-Purifying Respirator
- Protection without breathing resistance
- Different breathing filters and head / face pieces available
- Protection class IP65
- For Ex zones 1, 2, 21 and 22
Protective Suits
Dräger CPS 5900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material Zytron® 500, limited use
SPC 4700 with CVA 0700
- Splash Suit
- Ventilated splash-protective suits
- Continuous supply of breathing air and cooling airflow (type 3 suit)
- Coated barrier protection material CPM or carrier fleece material CLF
- Limited ...
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
