Dräger-Tubes^® for short-term measurements

• ​results are directly shown at the end of the measurement process
• spot measurement for more than 500 different gases 
• short measurement time: between 5 seconds to 15 minutes

Dräger accuro

• for spot measurements with a limited number of strokes
  
• integrated stroke counter for safe control
• easy to operate with one hand
• can be used in explosive areas 

Dräger X-plore^® Rd40 Filters

• ​standard thread connection Rd40 (40mm)
• robust aluminium housing
• to be used with full face masks with standard thread connection Rd40 (40mm)

Dräger X-plore^® Bayonet Filters

• Dräger specific Bayonet connection
• lateral position of the filters for an unrestricted field of vision and even weight distribution
• to be used with X-plore 3300 or X-plore 3500 half ...

Dräger X-plore^® 6530

• ​standard thread connection Rd40 according to EN 148-1
• EPDM mask body, visor made of triplex or PC
• to be used with all filters with standard thread connection Rd40

Dräger X-plore^® 6300

• ​standard thread connection Rd40 according to EN 148-1
• EPDM mask body, visor made of PMMA
• to be used with all filters with standard thread connection Rd40

Dräger X-plore^® 6570

• ​standard thread connection Rd40 according to EN 148-1
• silicone mask body, visor made of triplex or PC
• to be used with all filters with standard thread connection Rd40

Dräger X-plore^® 5500

• Dräger specific bayonet connection - lateral position of the filters 
• EPDM mask body, visor made of triplex or PC
• to be used in combination with X-plore Bayonet filters​

Dräger X-plore^® 3300/3500

• ​Dräger specific bayonet connection (twin-filter system)
• mask body made from Soft-TPE or DrägerFlex material (silicon free)
• to be used with X-plore Bayonet filters

Dräger PARAT^® Escape Hoods

- Escape hood in three versions: Industrial or fire escape hood, or both versions in one 

- Simple application in 3 steps

- Approved according to NIOSH 42 CFR Part 84, or EN 403:2004 for fire escape ...

Dräger X-plore^® 8000

• Protection without breathing resistance
• Different breathing filters and head / face pieces available
• Protection class IP65
• No Fit Testing Required

Dräger X-plore^® 8000 Filters

• Particle, gas and combination filters available
  
• To be used with powered air-purifying respirator X-plore^® 8500 or 8700 (EX)
  
• Optional pre- and odor filter
  

Dräger X-pect Goggles

- Protection against particles, gases, vapours and smoke

- Can be combined with Dräger respiratory protection and personal corrective eyewear

- Robust design

- PVC frame

- ...

Dräger X-pect^® Spectacles

- Protection against particles, droplets, splashes

- Can be combined with respiratory protection from Dräger

- Lightweight (19-28g)

- Anti-scratch and anti-fog coating

- UV ...

Dräger X-pect^® Cover Spectacles

Dräger X-pect^® cover spectacles can be used for a wide range of applications. Thanks to their large field of vision, the cover spectacles are compatible with most prescription eyewear. These spectacles can be ...