N-Methyl-2-PyrrolidoneC5H9NO
CAS-No.: | 872-50-4 |
|---|---|
EC-No.: | 212-828-1 |
Hazard signs
Occupational exposure limit
WORKPLACE EXPOSURE STANDARDS FOR AIRBORNE CONTAMINANTS (AU)
- TWA (ppm) 25
- STEL (ppm) 75
- TWA (mg/m3) 103
- STEL (mg/m3) 309
- H: 315
Causes skin irritation
- H: 319
Causes serious eye irritation
- H: 335
May cause respiratory irritation
- H: 360 D
May damage the unborn child.
- P: 201
Obtain special instructions before use
- P: 302 + 352
IF ON SKIN: Wash with plenty of soap and water.
- P: 308 + 313
IF exposed or concerned: Get medical advice/attention
No statement for this group.
No GHS Classification available at the moment.
Melting point:
-24 °C Boiling Point:
203 °C Density (at 20 °C, if not notified otherwise):
1,03 g/cm3Ionization:
9,17 eVFlash Point:
86 °C Ignition Temperature:
265 °C Vapour Pressure (at 20 °C, if not notified otherwise):
0,32 hPaLower Explosive Limit:
1,52 Vol.-%Upper Explosive Limit:
9,5 Vol.-%Hazardous Effects:
R
Important to know:
Substance of very high concern (SVHC) and included in the candidate list for authorisation.
Details
| 2 | Flammability: Flammable when warm | |
| 0 | Instability: No danger for normal conditions | |
| 2 | Health: Dangerous | |
| DG-EA: | ||
Also known as:
- 1-Methyl-2-pyrrolidinone
- 1-Methyl-2-pyrrolidinone 1-Methyl-2-pyrrolidone 1-Methyl-5-pyrrolidinone 1-Methylazacyclopentan-2-one 1-Methylpyrrolidinone 1-Methylpyrrolidone 2-Pyrrolidinone, 1-methyl- (7CI, 8CI, 9CI) 2-Pyrrolidinone, 1-methyl-(7Cl, 8Cl, 9Cl) M-Pyrol N-methyl pyrr
- 1-methyl-2-pyrrolidon 1-methyl-2-pyrrolidone 1-methylpyrrolidin-2-one 1-methylpyrrolidin-2-one,N-METHYLPYRROLIDONE, 1-Methyl-2-pyrrolidinone, N-METHYL-2-PYRROLIDONE N-methyl-2-pyrrolidone N-Methylpyrrolidone NMP NMP (n-methyl-2-pyrrolidone)
- 1-Methyl-2-pyrrolidone
- M-PYROL
- N-Methyl-2-pyrrolidon
- N-Methylpyrrolidon
- NMP
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for N-Methyl-2-Pyrrolidone C5H9NO
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Gas Detection Tubes
Dräger Sampling Tubes and Systems
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- display for clear readability of results
- can be used in explosive areas
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Filters
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks and Filters
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Powered Air Purifying Respirator
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
Protective Suits
Dräger CPS 5800
- Gas-tight suit
- SCBA worn over the protective suit
- four suit sizes (M-XXL)
- diagonal zipper for donning without assistance
- suit material Zytron® 500, limited use
Dräger CPS 7900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material D-mex, reusable
Dräger CPS 7800
- Gas-tight suit
- SCBA worn over the protective suit
- five suit sizes (S-XXL)
- diagonal zipper for easy donning and doffing without assistance
- suit material D-mex, reusable
Dräger CPS 5900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material Zytron® 500, limited use
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
