Methyl iodideCH3I
CAS-No.: | 74-88-4 |
|---|---|
UN-No.: | 2644 |
EC-No.: | 200-819-5 |
Hazard identification number: | 66 |
Warning sign: |
|
Hazard signs
Occupational exposure limit
WORKPLACE EXPOSURE STANDARDS FOR AIRBORNE CONTAMINANTS (AU)
- TWA (ppm) 2
- TWA (mg/m3) 12
- H: 301 + 331
Toxic if swallowed.
Toxic if inhaled.
- H: 312
Harmful in contact with skin.
- H: 315
Causes skin irritation
- H: 335
May cause respiratory irritation
- H: 351
Suspected of causing cancer.
- P: 201
Obtain special instructions before use
- P: 280
Wear protective gloves/protective clothing/eye protection/face protection.
- P: 301 + 310
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician
- P: 302 + 352
IF ON SKIN: Wash with plenty of soap and water.
- P: 304 + 340
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
- P: 311
Call a POISON CENTER or
doctor/physician.
No statement for this group.
No GHS Classification available at the moment.
Melting point:
-66 °C Boiling Point:
42 °C Density (at 20 °C, if not notified otherwise):
2,28 g/cm3Ionization:
9.54 ± 0.02 eVIgnition Temperature:
355 °C Vapour Pressure (at 20 °C, if not notified otherwise):
441 hPaLower Explosive Limit:
8,5 Vol.-%Upper Explosive Limit:
66 Vol.-%Hazardous Effects:
C
Details
| 0 | Flammability: No explosion danger | |
| 2 | Instability: Strong chemical reactions | |
| 3 | Health: Very dangerous | |
| DG-EA: | 2X | |
Also known as:
- Iodomethane
- Iodomethane Methyl iodide
- Methyl iodide
- Monoiodomethane
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for Methyl iodide CH3I
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Filters
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Masks and Filters
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Protective Suits
Dräger CPS 5800
- Gas-tight suit
- SCBA worn over the protective suit
- four suit sizes (M-XXL)
- diagonal zipper for donning without assistance
- suit material Zytron® 500, limited use
Dräger CPS 7900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material D-mex, reusable
Dräger CPS 7800
- Gas-tight suit
- SCBA worn over the protective suit
- five suit sizes (S-XXL)
- diagonal zipper for easy donning and doffing without assistance
- suit material D-mex, reusable
Dräger CPS 5900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material Zytron® 500, limited use
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
