Trimethylamine (anhydrous)C3H9N
CAS-No.: | 75-50-3 |
|---|---|
UN-No.: | 1083 |
EC-No.: | 200-875-0 |
Hazard identification number: | 23 |
Warning sign: |
|
Hazard signs
Occupational exposure limit
WORKPLACE EXPOSURE STANDARDS FOR AIRBORNE CONTAMINANTS (AU)
- TWA (ppm) 10
- STEL (ppm) 15
- TWA (mg/m3) 24
- STEL (mg/m3) 36
- H: 220
Extremely flammable gas
- H: 280
Contains gas under pressure; may explode if heated
- H: 315
Causes skin irritation
- H: 318
Causes serious eye damage.
- H: 332
Harmful if inhaled
- H: 335
May cause respiratory irritation
- P: 210
Keep away from heat/
sparks/open flames/hot
surfaces. — No smoking.
- P: 301 + 312 + 330
Wear protective gloves/protective
clothing/eye protection/
face protection.
- P: 305 + 351 + 338 + 310
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing.
Immediately call a POISON
CENTER or doctor/physician.
- P: 377
Leaking gas fire: Do not extinguish, unless leak can be stopped safely
- P: 403 + 233
Store in a well-ventilated place. Keep container tightly closed.
- P: 410 + 403
Protect from sunlight. Store in a well-ventilated place.
No statement for this group.
No GHS Classification available at the moment.
Melting point:
-117.1 °C Boiling Point:
2.9 °C Density (at 20 °C, if not notified otherwise):
0,00258 (0°C) g/cm3Ionization:
7.85 ± 0.05 eVFlash Point:
-7 °C Ignition Temperature:
190 °C Vapour Pressure (at 20 °C, if not notified otherwise):
1887 hPaLower Explosive Limit:
2 Vol.-%Upper Explosive Limit:
11,6 Vol.-%
Also known as:
- Dimethylmethaneamine
- Methanamine, N,N-dimethyl- (9CI) N,N-Dimethylmethanamine N-Trimethylamine TMA Trimethylamin Trimethylamine (8CI) Trimethylamine 40% Trimethylamine 40% acqueous solution Trimethylamine 50% Trimethylamine anhydrous
- N,N-Dimethylmethanamine
- N,N-dimethylmethanamine tri-methylamine Trimethylamine
- TMA
- Trimethylamine
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for Trimethylamine (anhydrous) C3H9N
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Portable Gas Detectors and Sensors
Dräger X-am® 5600
- Multi-gas detector
- 1 to 6 gas detection device
- for personal air monitoring
- detection of explosive, flammable and toxic gases as well as vapours and oxygen
Dräger X-am® 8000
- Multi-gas detector
- 1- to 7 gas detection device
- for clearance measurement
- detection of toxic and combustible gases as well as vapours and oxygen
Dräger X-am® 5000
- Multi-gas detector
- 1 to 5 gas detection device
- for personal air monitoring
- detection of flammable and toxic gases and organic vapours as well as oxygen and harmful concentrations
Dräger X-am® 5800
DrägerSensor XXS
- Electrochemical sensor XXS
- monitoring of toxic gases and lack of oxygen
- compatible with: Pac series and X-am family
- measuring range: in vol.-% and ppm
DrägerSensor XS
- Electrochemical sensor XS
- monitoring of toxic gases and oxygen deficiency including hydrides, amines, organic vapours
- compatible with: X-am 3000 and X-am 7000
- measuring range: in vol.-% and ...
Gas Detection Tubes
Dräger Short-term Tubes
- Short-term Tubes
- results are directly shown at the end of the measurement process
- spot measurement for more than 500 different gases
- short measurement time: between 5 seconds to 15 ...
Dräger Sampling Tubes and Systems
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- display for clear readability of results
- can be used in explosive areas
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Fixed Gas Detection and Sensors
Dräger Polytron® 8100 EC
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Increased Safety or flameproof
- Interface: 4-20 mA, Relays, Bus, HART ®
- IP class: IP65/66/67 and SIL2
- Special: ...
Dräger Polytron® 3000
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: with Intrinsic Safety
- Interface: 4-20 mA
- IP class: IP66 and SIL1
- Special: -
Dräger Polytron® 5100 EC
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: with Increased Safety or flameproof
- Interface: 4-20 mA, Relays
- IP class: IP 65/66/67
- Special: displays
Dräger Polytron® 6100 EC WL
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Intrinsic Safety
- Interface: Wireless
- IP class: 66/67 and SIL2
- Special: Wireless
Dräger Polytron® 7000
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Intrinsic Safety
- Interface: 4-20 mA, Bus, HART ®
- IP class: 66/67 and SIL2
- Special: Display
Electrochemical DrägerSensor®
- Electrochemical Gas Detector
- continuous monitoring of poisonous gases and oxygen
- compatible with: Polytron 8100, Polytron 7000, Polytron 6100, Polytron 5100, Polytron 3000, PointGard ...
Filters
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks and Filters
Dräger X-plore® 6570
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- silicone mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Powered Air Purifying Respirator
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
Protective Suits
Dräger CPS 5800
- Gas-tight suit
- SCBA worn over the protective suit
- four suit sizes (M-XXL)
- diagonal zipper for donning without assistance
- suit material Zytron® 500, limited use
Dräger CPS 7900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material D-mex, reusable
Dräger CPS 7800
- Gas-tight suit
- SCBA worn over the protective suit
- five suit sizes (S-XXL)
- diagonal zipper for easy donning and doffing without assistance
- suit material D-mex, reusable
Dräger CPS 5900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material Zytron® 500, limited use
Dräger SPC 4400 / SPC 4800 / SPC 4900
- Splash Suit
- Overall with hood (SPC 4400), protective suit with facial cuff (SPC 4800) or full-body protective suit with visor (SPC 4900)
- CPM (single use) or CLF (limited use)
- Antistatic version ...
SPC 4700 with CVA 0700
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
