Tartaric acidC4H6O6
CAS-No.: | 133-37-9 |
|---|---|
EC-No.: | 205-105-7 |
Hazard signs
- H: 318
Causes serious eye damage.
- P: 301 + 312 + 330
Wear protective gloves/protective
clothing/eye protection/
face protection.
- P: 305 + 351 + 338 + 310
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing.
Immediately call a POISON
CENTER or doctor/physician.
No statement for this group.
No GHS Classification available at the moment.
Melting point:
170 °C Density (at 20 °C, if not notified otherwise):
1,76 g/cm3Flash Point:
210 °C Ignition Temperature:
425 °C
Also known as:
- tartaric acid
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for Tartaric acid C4H6O6
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Filters
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks and Filters
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 6570
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- silicone mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Powered Air Purifying Respirator
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
Protective Suits
Dräger CPS 5800
- Gas-tight suit
- SCBA worn over the protective suit
- four suit sizes (M-XXL)
- diagonal zipper for donning without assistance
- suit material Zytron® 500, limited use
Dräger CPS 7900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material D-mex, reusable
Dräger CPS 7800
- Gas-tight suit
- SCBA worn over the protective suit
- five suit sizes (S-XXL)
- diagonal zipper for easy donning and doffing without assistance
- suit material D-mex, reusable
Dräger CPS 6900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper for donning without assistance
- suit material Umex, reusable
Dräger CPS 6800
- Gas-tight suit
- SCBA worn over the protective suit
- five suit sizes (S-XXL)
- diagonal zipper for donning without assistance
- suit material Umex, reusable
Dräger CPS 5900
- Gas-tight suit
- SCBA worn inside the protective suit
- five suit sizes (S-XXL)
- side zipper
- suit material Zytron® 500, limited use
Dräger SPC 2400 PVC / Flexothane
Dräger SPC 4400 / SPC 4800 / SPC 4900
- Splash Suit
- Overall with hood (SPC 4400), protective suit with facial cuff (SPC 4800) or full-body protective suit with visor (SPC 4900)
- CPM (single use) or CLF (limited use)
- Antistatic version ...
SPC 4700 with CVA 0700
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
