p-tert-ButyltolueneC11H16
Details
| CAS-No.: | 98-51-1 |
|---|---|
| UN-No.: | 2667 |
| EC-No.: | 202-675-9 |
| Hazard identification number: | 60 |
Warning sign
- 60
- 2667
Hazard signs
Occupational exposure limit
- TWA (ppm) 10
- TWA (ppm) 20
- TWA (mg/m3) 61
- TWA (mg/m3) 121
- H: 270
May cause or intensify fire; oxidizer - H: 302
Harmful if swallowed - H: 319
Causes serious eye irritation - H: 330
Fatal if inhaled. - H: 361 f
Suspected of damaging fertility. - H: 411
Toxic to aquatic life with long lasting effects
- P: 304 + 340 + 310
IF INHALED:
Remove victim to fresh air
and keep at rest in a position
comfortable for breathing.
Immediately call a POISON
CENTER or doctor/physician.
No statement for this group.
No GHS Classification available at the moment.
| Melting point: | |
|---|---|
| Boiling Point: | |
| Density (at 20 °C, if not notified otherwise): | 0,82 g/cm3 |
| Ionization: | 8.28 ± 0.02 eV |
| Flash Point: | |
| Ignition Temperature: | |
| Vapour Pressure (at 20 °C, if not notified otherwise): | 0,8 hPa |
| Lower Explosive Limit: | 0,7 Vol.-% |
| Upper Explosive Limit: | 7 Vol.-% |
Details
| 2 | Flammability: Flammable when warm | |
| 1 | Instability: Instable when heated | |
| Special: Water suitable as an extinguishing agent | ||
| 2 | Health: Dangerous | |
| DG-EA: | 3X | |
Also known as:
- 1-Methyl-4-tert-butylbenzene
- 1-Methyl-4-tert-butylbenzene 1-tert-Butyl-4-methylbenzene 4-Methyl-tert-butylbenzene 4-tert-Butyl-1-methylbenzene 4-tert-Butyltoluene Benzene, 1-(1,1-dimethylethyl)-4-methyl- (9CI) p-Methyl-tert-butylbenzene p-tert-Butyltoluene Toluene, p-tert-butyl-
- 1-Methyl-4-tert-butylbenzol
- 1-tert-butyl-4-methylbenzene 4-tert-butyltoluene 4-tert-butyltoluene / 1-tert-butyl-4-methylbenzene / Benzene, 1-(1,1-dimethylethyl)-4-methyl- / 98-51-1
- 4-tert-Butyltoluene
- 4-tert-Butyltoluol
- p-tert-Butyltoluene
- PTBT
Suitable products for p-tert-Butyltoluene C11H16
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Gas Detection Tubes
Dräger Short-term Tubes
- Short-term Tubes
- results are directly shown at the end of the measurement process
- spot measurement for more than 500 different gases
- short measurement time: between 5 seconds to 15 ...
Dräger Sampling Tubes and Systems
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- display for clear readability of results
- can be used in explosive areas
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Filters
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 (40mm)
- robust aluminium housing
- to be used with full face masks with standard thread connection Rd40 (40mm)
Masks and Filters
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Powered Air Purifying Respirator
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
