Calcium cyanamideCaCN2
CAS-No.: | 156-62-7 |
|---|---|
UN-No.: | 1403 |
EC-No.: | 205-861-8 |
Hazard identification number: | 423 |
Warning sign: |
|
Hazard signs
Occupational exposure limit
WORKPLACE EXPOSURE STANDARDS FOR AIRBORNE CONTAMINANTS (AU)
- TWA (mg/m3) 0,5
- H: 261
In contact with water releases flammable gases
- H: 302
Harmful if swallowed
- H: 315
Causes skin irritation
- H: 317
May cause an allergic skin reaction
- H: 318
Causes serious eye damage.
- H: 335
May cause respiratory irritation
- P: 231 + 232
Handle under inert gas. Protect from moisture.
- P: 280
Wear protective gloves/protective clothing/eye protection/face protection.
- P: 301 + 312 + 330
Wear protective gloves/protective
clothing/eye protection/
face protection.
- P: 304 + 340 + 312
IF INHALED:
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Call a POISON CENTER or
doctor/physician if you feel
unwell. (Sigma-Aldrich)
- P: 305 + 351 + 338 + 310
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing.
Immediately call a POISON
CENTER or doctor/physician.
- P: 333 + 313
If skin irritation or rash occurs: Get medical advice / attention.
No statement for this group.
No GHS Classification available at the moment.
Melting point:
1340 °C Density (at 20 °C, if not notified otherwise):
2,29 g/cm3Hazardous Effects:
Ss
Also known as:
- Calcium carbimide
- Calcium cyanamide
- Calcium cyanamide Kalkstickstoff
- Cyanamide
- Lime nitrogen
- Nitrogen lime
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for Calcium cyanamide CaCN2
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Filters
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks and Filters
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 6570
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- silicone mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Powered Air Purifying Respirator
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
