This website uses cookies. By using the website you agree to our cookie policy. You can change your cookie settings in your browser.Find out more

ChloroacetaldehydeC2H3ClO

CAS-No.:
107-20-0
UN-No.:
2232
EC-No.:
203-472-8
Hazard identification number:
66
Warning sign:
  • 66
  • 2232
Hazard signs
GHS05
GHS06
GHS08
GHS09
Occupational exposure limit
WORKPLACE EXPOSURE STANDARDS FOR AIRBORNE CONTAMINANTS (AU)
  • TWA (ppm) 1 Peak limitation
  • TWA (mg/m3) 3.2 Peak limitation
  • H: 301
    Toxic if swallowed
  • H: 311
    Toxic in contact with skin
  • H: 314
    Causes severe skin burns
    and eye damage.
  • H: 330
    Fatal if inhaled.
  • H: 351
    Suspected of causing cancer.
  • H: 400
    Very toxic to aquatic life
  • Melting point:
    -16.3 °C
  • Boiling Point:
    85 °C - 86 °C
  • Density (at 20 °C, if not notified otherwise):
    1,19 (25°C) g/cm3
  • Ionization:
    10,61 eV
  • Flash Point:
    70 °C
  • Vapour Pressure (at 20 °C, if not notified otherwise):
    139 (25°C) hPa
  • Lower Explosive Limit:
    3,9 Vol.-%
  • Upper Explosive Limit:
    9 Vol.-%
  • Hazardous Effects:
    C
  •  
diamond 1 1 4
Details
Diamond-Red1Flammability: Flammable when heated 
Diamond-Yellow1Instability: Instable when heated 
Diamond-Blue4Health: Extremely dangerous 
DG-EA:2XE
Also known as:
  • 2-Chlor-1-ethanal
  • 2-Chloracetaldehyd
  • 2-Chloro-1-ethanal
  • 2-Chloroethanal
  • ACETALDEHYDE, CHLORO-
  • Chloracetaldehyde solution 50%
  • chloroacetaldehyde
  • Chloroacetaldehyde (40% aqueous solution)
  • Chloroacetaldehyde solution 50%
  • Monochloracetaldehyd
  • Monochloroacetaldehyde

Get in touch with Dräger

If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.

Suitable products for Chloroacetaldehyde C2H3ClO

Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.

Filters

Respirator filter Rd40

Dräger X-plore® Rd40

  • Respirator filter Rd40
  • ​standard thread connection Rd40 according to EN 148-1
  • robust aluminium housing
  • to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Respirator filter Rd90

Dräger X-plore® Rd90 Filters

  • Respirator filter Rd90
  • ​Dräger specific Rd90 connection
  • robust aluminium housing
  • to be used in combination with X-plore 4700 half masks
Respirator filter Bayonet

Dräger X-plore® Bayonet

  • Respirator filter Bayonet
  • Dräger specific Bayonet connection
  • lateral position of the filters for an unrestricted field of vision and even weight distribution
  • to be used with X-plore 3300 or X-plore 3500 ...

Masks and Filters

Single-filter half-face mask

Dräger X-plore® 4700

  • Single-filter half-face mask
  • ​standard thread connection Rd40 according to EN 148-1
  • mask body made from TPE (universal size) or silicone (two sizes)
  • to be used with all filters with standard thread ...
Single-filter full-face mask

Dräger X-plore® 6530

  • Single-filter full-face mask
  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of triplex or PC
  • to be used with all filters with standard thread connection ...
Single-filter full-face mask

Dräger X-plore® 6300

  • Single-filter full-face mask
  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of PMMA
  • to be used with all filters with standard thread connection Rd40
Twinfilter full-face mask

Dräger X-plore® 5500

  • Twinfilter full-face mask
  • ​Dräger specific bayonet connection – lateral position of the filters 
  • EPDM mask body, visor made of triplex or PC
  • to be used in combination with X-plore Bayonet ...
Twin-filter half-face mask

Dräger X-plore® 3300/3500

  • Twin-filter half-face mask
  • ​Dräger specific bayonet connection (twin-filter system)
  • mask body made from Soft-TPE or DrägerFlex material (silicon free)
  • to be used with X-plore Bayonet ...

Powered Air Purifying Respirator

Filters for PAPR

Dräger X-plore® 8000 Filters

  • Filters for PAPR
  • Particle, gas and combination filters available
  • To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
  • Optional pre- and odour filter

null

Dräger X-plore® 8000

Protective Suits

Gas-tight suit

Dräger CPS 7900

  • Gas-tight suit
  • ​SCBA worn inside the protective suit 
  • five suit sizes (S-XXL)
  • side zipper
  • suit material D-mex, reusable 
Gas-tight suit

Dräger CPS 7800

  • Gas-tight suit
  • ​SCBA worn over the protective suit 
  • five suit sizes (S-XXL)
  • diagonal zipper for easy donning and doffing without assistance
  • suit material D-mex, reusable 
Gas-tight suit

Dräger CPS 6900

  • Gas-tight suit
  • ​SCBA worn inside the protective suit 
  • five suit sizes (S-XXL)
  • side zipper for donning without assistance 
  • suit material Umex, reusable
Gas-tight suit

Dräger CPS 6800

  • Gas-tight suit
  • SCBA worn over the protective suit
  • five suit sizes (S-XXL)
  • diagonal zipper for donning without assistance 
  • suit material Umex, reusable
Splash Suit

Dräger SPC 4400 / SPC 4800 / SPC 4900

  • Splash Suit
  • Overall with hood (SPC 4400), protective suit with facial cuff (SPC 4800) or full-body protective suit with visor (SPC 4900)
  • CPM (single use) or CLF (limited use)
  • Antistatic version ...

SPC 4700 with CVA 0700

Get in touch with Dräger

If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.

Discover more: Dräger VOICE - The hazmat-based safety product finder

You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!

VOICE Hazmat