Hospital Consumables & Accessories

The same detailed attention that we design into our ventilators, anaesthesia workstations, incubators and monitoring products, goes into the engineering and manufacturing of our accessories and consumables, as they are an integral part of life-saving medical equipment and an essential part of securing your performance!

We attach great importance to sustainable products. These are some of our sustainability efforts to make our contribution:

- Avoiding materials of concern (e.g. Latex, DEHP and PVC)

- Eco-conscious product design

- Mitigating transport emissions

Discover some of our sustainable products for Adult to Neonatal patient applications

1.  S. S. Singh Rowdhwal and J. Chen; “Toxic Effects of Di-2-ethylhexyl Phthalate: An Overview”; Volume 2018; Article ID 1750368: https://doi.org/10.1155/2018/1750368
2.  Plasticisers for medical applications: Plasticisers for medical applications – PVCMed Alliance

There're two key factors involved in a successful NIV treatment. They are:

Rotation of mask type

Studies have proven that alternating different mask types improves the effectiveness of treatment when treating acute respiratory failure.

Choice of interface

Selecting the correct type of interface greatly reduces painful skin breakdown and ulcerations. Thus, an alternating interface strategy not only reduces the points of highest pressure, but also improves NIV tolerance and efficacy^8,9.

Di (2-ethylhexyl) phthalate (DEHP) is a synthetic chemical belonging to a family known as phthalates, which is used to make plastics more flexible.

Due to the overuse of DEHP in many products, it enters and pollutes the environment through release from industrial settings and plastic waste disposal sites. DEHP can enter the body through inhalation, ingestion, and dermal contact on a daily basis, which raises concerns about its potential effects on human health².

As DEHP is currently under increasing scrutiny by regulatory and medical authorities, a range of DEHP alternatives have been approved by the European Pharmacopeia, and are now made available for nearly all medical applications³.

For many years, we have minimised the usage of substances of concern. Nearly all of our hospital consumables and accessories are now free of latex, PVC and DEHP.

We know that your top priorities are to keep the patients safe and to offer them the highest levels of comfort to make their stay as comfortable as possible. Our accessories and consumables play an important role in achieving our common goal as they are often in direct contact with your patients – that‘s why patient comfort and ease of use were the focal point when designing our accessories as they are an essential part of securing patient safety and comfort.

1. Delirium and sleep disturbances in the intensive care unit: can we do better? Weinhouse GL, Curr Opin Anaesthesiol. 2014; 27(4):403-8
2. Comfort and patient‑centred care without excessive sedation: the eCASH concept.Vincent JL et al., Intensive Care Med 2016; 42:962–971
3. Patient-ventilator interaction and sleep in mechanically ventilated patients: Pressure support versus proportional assist ventilation Karen Bosma, Gabriela Ferreyra, Cristina Ambrogio, et al., Crit Care Med 2007; 35:1048–1054
4. Ferrer M, et al. Non-invasive Ventilation during Persistent Weaning Failure. Am. J. Respir. Crit. Care Med. 2003; Vol. 168, No. 1:70–76. (PubMed)
5. Warren DK, et al. Outcome and attributable cost of ventilator-associated pneumonia among intensive care unit patients in a suburban medical center. Crit Care Med. 2003; 31(5):1312-7. (PubMed)
6. Antonelli M, et al. * A comparison of noninvasive positive-pressure ventilation and conventional mechanical ventilation in patients with acute respiratory failure.  _N Engl J Med 1998, 339: * 429-435.
7. Hilbert G, Gruson D, Gbikpi-Benissan G, Cardinaud JP. Sequential use of noninvasive pressure support ventilation for acute exacerbations of COPD. Intensive Care Med. 1997;23:955–961
8. Hilbert G, Gruson D, Gbikpi-Benissan G, Cardinaud JP. Sequential use of noninvasive pressure support ventilation for acute exacerbations of COPD. Intensive Care Med. 1997;23:955–961.
9. Ozyilmaz E et al*.* Timing of noninvasive ventilation failure: causes, risk factors, and potential remedies. BMC Pulm. Med. 2014; 14:19

Our range of accessories and consumables is designed to help you in your daily routines to make your work as easy as possible and to reduce the potential of errors to a minimum. That’s what makes them an essential part of increasing work efficiency and cost savings.

As your specialists in acute care, we understand that even the smallest parts need to function at the highest level. Dräger ventilation accessories lend strong support to the functionality of your workplace solutions and help you optimise clinical workflow. Our ventilation masks, breathing circuits and other ventilation accessories are tested for ultimate compatibility, you can easily integrate our ventilation accessories with the interfaces of your existing devices, enabling them to work seamlessly in the background – so you can stay focused on your patient.

At Dräger, we understand that “small” doesn’t mean less important. And that’s why we give our accessories and consumables the highest level of attention – so that when you need to give your tiniest patients the best possible care, you can rely on our smallest products to help you do just that. Dräger accessories and consumables for neonatal care provide you with total solutions to care for premature babies. They are tailor-made to enhance thermoregulation, neonatal respiratory support, vital sign monitoring and much more.

We understand accessories and consumables play a critical role in supporting your workplace solutions. That’s why we’re proud to deliver the high level of Dräger quality in every one of our products. Available in both reusable and disposable versions, our accessories provide the right solution for optimal workflows.