Dräger Polytron® 8100 EC
Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Increased Safety or flameproof
- Interface: 4-20 mA, Relays, Bus, HART ®
- IP class: IP65/66/67 and SIL2
- Special: Display
Durable, intelligent and sensitive – the DrägerSensor®
With unique electrochemical DrägerSensors, Polytron 8100 can detect over 100 toxic gases and oxygen. These long life sensors provide continuous detection even under the harshest conditions. DrägerSensors offer the industry’s widest temperature and humidity range between -40 °C to +65 °C (-40 °F to +150 °F). The built-in memory contains all calibration and configuration information: therefore the sensor ships pre calibrated and is ready for immediate operation. An intelligent sensor self-test function allows for predictive maintenance. The intrinsically safe connection of the sensor eliminates the need for a flame arrestor, giving you faster response times and higher sensitivity.
Easy device management via digital communication
The Dräger Polytron 8100 is equipped with digital interfaces allowing for quick and easy remote interrogation of the transmitter’s state. Integration with existing asset management systems such as PACTware™ is possible via DTM. In addition to the common HART® communication system, the fieldbus interfaces with PROFIBUS® PA, FOUNDATION fieldbus™ H1, and Modbus RTU are also available.
Same design, same operating principle
The Dräger Polytron 8100 belongs to the Polytron 8000 series. All transmitters in this series have the same design and user interface. This allows for uniform operation with reduced training and maintenance requirements. The large graphic backlit display shows status information clearly and in an easy to use format. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Colored LEDs (green, yellow and red) provide additional alarm and status information. The Polytron 8100 is operated by means of a magnetic wand over contact surfaces.
Three relays for controlling external equipment
Upon request, the Dräger Polytron 8100 can also be supplied with three integrated relays. This enables you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm. Audible alarms, signal lights or similar devices can thus be controlled locally without an additional cable between the transmitter and central controller.
Safe, robust housing for every application
Polytron 8100 features a Class I, Div. 1 rated explosion proof enclosure made from aluminium or stainless steel, making it suitable for a wide range of environmental conditions. A protection type “e” version includes a convenient docking station which allows installation in hazardous atmospheres without running conduit (where approved) and this also facilitates pre-assembly.
Remote sensor option does not require conduit
The remote sensor enclosure allows you to install the sensor separately from the transmitter. This 'external' installation makes it easier to use if the sensor has to be installed in a difficult to access or unfavourable position.
More functions through dongles
With different software dongles, additional functions can be added to the Polytron 8100. The data logger dongle comes as standard and continuously records gas readings and events. A sensor test dongle is available for additional sensor self-test functionality. A third dongle is available for advanced sensor diagnosis. These dongles indicate the sensor’s vitality, giving you an estimate of the sensor’s remaining service life.
Images and Videos
Polytron 8100 EC Product Information, en
The Polytron® 8100 EC is Dräger’s top of the line explosion-proof transmitter for the detection of toxic gases or oxygen. It uses a high performance plug and play electrochemical DrägerSensor to detect a specific gas. Besides having a 3-wire 4 to 20 mA analog output with relays, it also offers HART®, Modbus and Fieldbus protocol, making it compatible with most control systems.
Explosion Protection Brochure, en-master
Detecting flammable gases and vapours before they become a hazard takes priority over mechanical and electrical explosion-protection measures.
Brochure: Digital Communication (PDF)
Dräger has counted on digital communication for over 30 years. This includes the globally recognised HART®, FoundationFieldbus H1®, Profibus PA® and LON technologies.
Gas List Brochure, en
SIL Brochure, en
Dräger Polytron 8000 comDTM Modbus Version 2.5.0
Dräger Polytron 8xxx DD FF AMS V4.0
Dräger Polytron 8xxx DD FF Field Connector V4.0
Dräger Polytron 8xxx DD HART® AMS 1.x R400.2.
Dräger Polytron 8xxx DD HART® AMS FW1.x
Dräger Polytron 8xxx DD HART® AMS FW2.0.x
Dräger Polytron 8xxx DD HART® Field Connector 475 FW1.x
Dräger Polytron 8xxx DD HART® Field Connector 475 FW2.0.x
Dräger Polytron 8xxx DD HART® PDM V2.0
Dräger Polytron 8xxx DD PB PDM V4.0
Dräger Polytron 8xxx DTM FF Setup V188.8.131.524
Dräger Polytron 8xxx DTM HART® Setup V184.108.40.2062
Dräger Polytron 8xxx DTM MB Setup V1.0.652.0
Dräger Polytron 8xxx DTM PB Setup V220.127.116.114
Limited Manufacturer Guarantee_Garantiekarte Polytron 8100, 8200, 87x0, 8900 9300655 (ed 02), en, de
More than the sum Brochure, en
Online Configurator for Polytron 5000 & 8000 series
PolySoft 1.20.0 Setup
Technical Manual Digital communication Modbus RTU me
Technical Manual Fieldbus communication FF me
Technical Manual Fieldbus communication PROFIBUS PA me
Sensors and substances
Dräger Sensors for fixed gas detectors can be used to measure a large number of hazardous substances. Check the different sensors by searching for a substance. Get in contact with our experts to get more information.
Utilise for 83 Substances
32 matching SensorFGDS
- Cable entry
- M20 or 3/4" NPT
- Intrinsic Safety
- Increased Safety
- ✓ SIL 2 (IEC 61508-1-3)
- 4-20 mA
- Power Supply
- 10 to 30 V DC, 3-wire
- Temperature (operation)
- -40°C - 65°C
- 0 to 100% r.h., non-condensing
- Pressure (hPa)
- 700 - 1300
- Dimensions (H × W × D)
- 0.28x0.15x0.13 m
- 5 Kg
- Housing Material
- Epoxy coated copper-free aluminum or stainless steel SS316 L
- Degree of protection (IP class)
- CE marking
- GOST (EAC)
- Performance approval
- ✓ (O2, H2S)
- Shipping approval (MED)