Dräger PARAT® 7500
Ready for escape in only 3 steps
Exceptionally innovative and intuitive: When opening the packaging, the filter plug is automatically released from the filter. The filter is then deployed into operational position and the hood can be immediately donned. Thanks to the self-adjusting internal head harness, no additional adjustment is required. All you have to do is open the packaging, remove and don the hood – and leave the danger zone.
The high-performance combination filter reliably protects against a wide range of fire and toxic industrial gases, vapours and particles. The ABEK CO P3 Filter is approved according to the EN standard 403:2004 for fire escape hoods, the DIN standard 58647-7 for filtering escape devices and is tested in accordance with the EN standard 14387:2004 for gas filter(s) and combined filter(s). In addition, the filter is tightly sealed with two filter plugs keeping it safe over its long lifetime.
16 years of service life
Replacing the filter after eight years will extend the service life of the Dräger PARAT Escape Hood to 16 years in total. For this, Dräger offers filter replacement service or expert training for your employees.
Robust and ergonomic
Both, ergonomics and wearing comfort were considered when designing the packaging of the Dräger PARAT Escape Hoods. The escape hood can be carried with a belt, shoulder strap, grip clip or belt clip. The PARAT Hard Case can also be mounted on the wall using a wallholder. Addtionally, the robust packaging of the Dräger PARAT Escape Hoods protects the device from damage.
Different packaging types
You can select between two packaging types: The Hard Case provides splash water protection (IP54) – the Soft Pack provides dust protection (IP5). Both packaging types have a viewing window to check the filter expiration date and the condition of the device. Particularly convenient: The security seal on the packaing shows if the unit has been opened.
How-to-use PARAT Escape Hoods – watch our Videos
Get a quick overview about the donning of our PARAT Hoods und how to replace filters.
· How-to-use Video PARAT - Soft Pack
· How-to-use Video PARAT - Hard Case
· How-to-use Video PARAT - Single Case
Images and Videos
Product Information: Dräger PARAT® 7500
The combined fire and industrial escape hood Dräger PARAT® 7500 was developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust housing and a tested ABEK CO P3 filter ensure protection from toxic industrial and fire-related gases, vapours and particles for at least 15 minutes.
Third-party rescue using the PARAT® 4700 Poster, en
Donning Poster Dräger PARAT® Hard Case, en
Donning procedure of the Dräger PARAT® hard case version
- Product type
- Industrial and fire escape hood
- Protection against
- Industrial and fire gases, vapours and particles
- Filter type
- ABEK CO P3
- Escape time
- min. 15 minutes
- 16 years (filter exchange required after 8 years)
- Packaging options
- Soft Pack (dust protection IP5); Hard Case (splash water protection IP54)
- 0.83 Kg
- Eye protection
- Filter expiry date
- Training unit
- Wall mounting
- ✓ (Hard Case only)
- Hip strap
- Shoulder strap
- Belt clip
- Grip clip
- Carrying case
- Slip guard carabiner
- Hand strap
- EN 403:2004
- DIN 58647-7
- EN 14387:2004 (only filter)
- EN 137:2006 Typ 2
- NIOSH 42 CFR Part 84