Dräger X-am^® 5000

• ​1 to 5 gas detection device
  
• for personal air monitoring 
  
• detection of flammable and toxic gases and organic vapours as well as oxygen and harmful concentrations
  

Dräger X-am^® 2500

• ​1 to 4 gas detection device
  
• for personal air monitoring 
  
• detection of flammable gases and vapours as well as O₂, CO, NO₂, SO₂ and ...

Dräger X-am^® 8000

• ​1- to 7 gas detection device
  
• for clearance measurement
  
• detection of toxic and combustible gases as well as vapours and oxygen
  

Dräger X-am^® 3500

• ​1 to 4 gas detection device
  
• for clearance measurement
  
• detection of flammable gases and vapours as well as O₂, CO, H₂S, NO₂ and ...

X-pid 9500 / X-pid 9500+

• ​Selective VOC gas detection
  
• For frequent testing of toxic & carcinogenic substances
  
• Laboratory quality results in very low concentrations
  
• Benzene measurement starting ...

Dräger X-am^® 5600

• ​1 to 6 gas detection device
  
• for personal air monitoring 
  
• detection of explosive, flammable and toxic gases as well as vapours and oxygen
  

Dräger X-am^® 2800

• ​1 to 4 gas detection device
• for personal air monitoring 
• detection of flammable gases and vapours as well as O₂, CO, NO₂, SO₂ and H₂S

Dräger X-am^® 5800

• 1 to 6 gas detection device

• for personal air monitoring 
• detection of flammable gases/vapours, toxic gases as well as oxygen
• System component of Dräger Gas ...

Dräger Catalytic Ex-Sensors

• ​monitoring of explosive mixtures
  
• high poisoning resistance to silicones and H₂S
  
• compatible with: X-am family
  
• measuring range: lower explosion limit up to 100 ...

PID sensors

• ​detection of volatile organic compounds in low concentrations
• compatible with: X-am 7000 and X-am 8000 – selective benzene measurement with pre-tubes possible
• measuring range: in ppm and ...

Dräger Infrared Sensors

• ​monitoring of explosive mixtures and CO₂
  
• recommended for frequent occurrence of explosive gases
  
• compatible with: X-am 5600 / 7000 / 8000
  
• measuring range: lower ...

Dräger Short-term Tubes

• ​results are directly shown at the end of the measurement process
  
• spot measurement for more than 500 different gases 
  
• short measurement time: between 5 seconds to 15 ...

Dräger Sampling Tubes and Systems

• ​analysis of the sample in a laboratory
  
• measurement of complex compounds and mixtures of substances possible 
  
• detection of low concentrations possible 
  

Dräger X-act^® 5000 Basic

• ideal for a high number of strokes
• display for clear readability of results
• can be used in explosive areas

Dräger-Tube Pump accuro^®

• for spot measurements with a limited number of strokes
  
• integrated stroke counter for safe control
  
• easy to operate with one hand
  
• can be used in explosive ...

Dräger X-plore^® Rd40

• ​standard thread connection Rd40 according to EN 148-1
  
• robust aluminium housing
  
• to be used with half and full face masks with standard thread connection Rd40 according to EN ...

Dräger X-plore^® Rd90 Filters

• ​Dräger specific Rd90 connection
  
• robust aluminium housing
  
• to be used in combination with X-plore 4700 half masks
  

Dräger X-plore^® Bayonet

• Dräger specific Bayonet connection
  
• lateral position of the filters for an unrestricted field of vision and even weight distribution
  
• to be used with X-plore 3300 or X-plore 3500 half ...

Dräger X-plore^® 4700

• ​standard thread connection Rd40 according to EN 148-1
  
• mask body made from TPE (universal size) or silicone (two sizes)
  
• to be used with all filters with standard thread connection ...

Dräger Panorama^® Nova

• ​different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
  
• EPDM or silicone mask body, visor made of triplex or ...

Dräger X-plore^® 6530

• ​standard thread connection Rd40 according to EN 148-1
  
• EPDM mask body, visor made of triplex or PC
  
• to be used with all filters with standard thread connection Rd40
  

Dräger X-plore^® 6300

• ​standard thread connection Rd40 according to EN 148-1
• EPDM mask body, visor made of PMMA
• to be used with all filters with standard thread connection Rd40

Dräger X-plore^® 5500

• ​Dräger specific bayonet connection – lateral position of the filters 
  
• EPDM mask body, visor made of triplex or PC
  
• to be used in combination with X-plore Bayonet ...

Dräger X-plore^® 3300/3500

• ​Dräger specific bayonet connection (twin-filter system)
  
• mask body made from Soft-TPE or DrägerFlex material (silicon free)
  
• to be used with X-plore Bayonet filters
  

Dräger PARAT^® 1260

- Small escape filter device for 10-minute protection against toxic industrial gases and vapours

- Double protection in areas with high humidity due to vacuum sealed aluminum barrier bag

- ...

Dräger PARAT^® 3100

- Half mask escape device equipped with ABEK15 filter for 15 min. protection against toxic industrial gases according to DIN 58647-7

- Easy donning

- Various carrying options

- Up to ...

Dräger PARAT^® 3160

- Half mask escape device with ABEK15 filter for 15 min. protection against toxic industrial gases according to DIN 58647-7

- Double protection in areas with high humidity due to vacuum sealed ...

Dräger PARAT^® 3200

- Mouthpiece / nose clip escape device with ABEK15 filter for 15 min. protection against toxic industrial gases according to DIN 58647-7

- Various carrying options

- Up to 12 year service ...

Dräger PARAT^® 3260

- Mouthpiece with nose clip and ABEK15 filter for 15 min. protection against toxic industrial gases - DIN 58647-7

- Double protection in areas with high humidity due to vacuum sealed aluminum ...

Dräger PARAT^® Filtering Escape Hoods

- Escape hood in three versions: Industrial or fire escape hood, or both versions in one 

- Simple application in 3 steps

- Approved to EN 403:2004 for fire escape hoods and/or DIN ...

Dräger X-plore^® 8000

• Protection without breathing resistance
• Different breathing filters and head / face pieces available
• Protection class IP65
• For Ex zones 1, 2, 21 and 22
  

Dräger X-plore^® 8000 Filters

• Particle, gas and combination filters available
• To be used with powered air purifying respirator X-plore^® 8500 or 8700 (EX)
• Optional pre- and odour filter

Dräger CPS 5800

• SCBA worn over the protective suit
  
• four suit sizes (M-XXL)
  
• diagonal zipper for donning without assistance
  
• suit material Zytron^® 500, limited ...

Dräger CPS 7900

• ​SCBA worn inside the protective suit 
  
• five suit sizes (S-XXL)
  
• side zipper
  
• suit material D-mex, reusable 
  

Dräger CPS 7800

• ​SCBA worn over the protective suit 
  
• five suit sizes (S-XXL)
  
• diagonal zipper for easy donning and doffing without assistance
  
• suit material D-mex, ...

Dräger CPS 6900

• ​SCBA worn inside the protective suit 
  
• five suit sizes (S-XXL)
  
• side zipper for donning without assistance 
  
• suit material Umex, reusable
  

Dräger CPS 6800

• SCBA worn over the protective suit
  
• five suit sizes (S-XXL)
  
• diagonal zipper for donning without assistance 
  
• suit material Umex, reusable
  

Dräger CPS 5900

• ​SCBA worn inside the protective suit
  
• five suit sizes (S-XXL)
  
• side zipper
  
• suit material Zytron^® 500, limited use
  

Dräger WorkMaster Industry

• SCBA worn over the protective suit
  
• four suit sizes (M-XXL)
  
• zipper on the back
  
• suit material Symex, reusable
  

Dräger SPC 4400 / SPC 4800 / SPC 4900

• Overall with hood (SPC 4400), protective suit with facial cuff (SPC 4800) or full-body protective suit with visor (SPC 4900)
• CPM (single use) or CLF (limited use)
• Antistatic version ...

SPC 4700 with CVA 0700

• ​Ventilated splash-protective suits
• Continuous supply of breathing air and cooling airflow (type 3 suit)
• Coated barrier protection material CPM or carrier fleece material CLF
• Limited ...