Dräger X-plore® 1700+ Dust Masks

Dräger X-plore® 1700+

Contact us

Dräger X-plore® 1700+

Hardly noticeable breathing resistance thanks to the specially developed CoolSAFE+ filter material: The Dräger X-plore® 1700+ particle filtering face pieces provide optimum breathing comfort through minimum breathing resistance.

Performance in all protection classes

The Dräger X-plore 1700+ series offers effective protection against fine dust as well as solid and liquid particles in the workplace, e.g. in general industry, construction and services. The models of the series are available in all three protection classes FFP1, FFP2 and FFP3 according to EN 149:2001+A1:2009. The colour coding in dark-blue, light-blue and white for the three protection levels provides more safety when selecting the right mask.

CoolSAFE+ filter material

The CoolSAFE+ filter material ensures highest breathing comfort by reducing the breathing resistance to a minimum. This enables you to breathe easily and comfortably over longer periods of time. At the same time, the material features an excellent filter performance that effectively stops coarse and fine particles.

High wearing comfort and a secure seal

Alongside the material‘s filter performance, a secure seal without leakage is decisive in how effective the masks‘ protection is. The ergonomic form combined with soft material ensures that the Dräger X-plore 1700+ fits the face well. The internal nose pad and external nose clip hold the mask in place to seal effectively in the critical areas around the nose. This ensures the most comfort even during longer periods of use.

Ease of use

Dräger X-plore 1700+ is easy to handle. The VarioFLEX harness is simple to put on and remove, and sits without any pressure. The harness can be individually adjusted with EasyStop.

Low, lower, lowest

Low breathing resistances are decisive when it comes to comfort. Additionally, low breathing resistance leads to less exhaustion during longer work periods. Dräger X-plore 1700+ minimizes breathing resistances with the CoolSAFE+ filter material: In contrast to the maximum allowed breathing resistances of the valid standard EN 149:2001+A1:2009 the actual measured values of the Dräger masks are much lower.

Breathe easier with the CoolMAX exhalation valve:

The CoolMAX exhalation valve flushes exhaled air optimally out of the mask. The breathing resistance is continually reduced making breathing especially easy. The humid and warm exhaled air is flushed out of the mask, preventing the fogging of eyewear and heat accumulation. The result: You enjoy highest level of comfort.


Light Respiratory Protection from Dräger
Light Respiratory Protection from Dräger

When the ambient air is full of hazards, it is hard to focus on one’s job. We provide you with our best protection, so you can confidently take on your daily tasks and challenges.


Guide for selection and use of filtering devices
Guide for selection and use of filtering devices


IFU X-plore Air FFP2 NR 9300887 de-me
IFU X-plore Air FFP2 NR 9300887 de-me

These instructions for use are provided for informational purposes only. Please always read and comply with the instructions for use delivered with the product.


Statement on disinfection of Filtering Face Pieces
X-plore 1700 Donning Poster, en

Technical Data

Key Facts

Product type
Disposable dust mask
Working in dusty environments
Protection against
Fine dusts, solid and liquid particles
Form of mask body
Flat-folded (for space-saving storage and easy transport)
Protection classes EN 149
Colour coding of protection classes EN 149
FFP1: dark blue; FFP2: light blue; FFP3: white
✗ (max. one work shift)
Sizes EN
Universal size (all protection classes)


Drop-down option
Exhalation valve
Optionally available for FFP2 and FFP3
Odour-stop version EN
Adjustable length of straps


Mask body
Non-woven fabric (CoolSAFE+ for extra low breathing resistance)
Head straps
Continuous-looped tear-proof textile strap


EN 149:2001+A1:2009, (EU) 2016/425
AS/NZS 1716:2012
Dolomite dust test (marking D)

Compare with related Products

Get in touch with Dräger

Envelop Icon

Dräger Safety AG & Co. KGaA

​Branch​ ​Office
P.O.​ ​Box​ ​505108
Dubai,​ ​United​ ​Arab​ ​Emirates 

+971 4 42 94 600

​F:​ ​+971​ ​4​ ​42​ ​94​ ​699
Not​ ​all​ ​products,​ ​features,​ ​or​ ​services​ ​are​ ​for​ ​sale​ ​in​ ​all​ ​countries.​ ​Please​ ​contact​ ​your​ ​local​ ​Dräger​ ​representative​ ​for​ ​more​ ​information.