Compare

Dräger PIR 3000

Flammable Gas Detectors
  • Explosion proof point infrared gas detector
  • Continuous monitoring of flammable gases and vapours
  • Built for the harshest industrial environments
Dräger PIR 3000 Flammable Gas Detectors
Dräger PIR 3000 Flammable Gas Detectors
Dräger PIR 3000 Flammable Gas Detectors
Compare

Stay safe: Measure flammable gases with Dräger's expertise

Quick Links
Specifications
Accessories
Downloads
Explore all substances
Infrared
Measuring Principle
<= 30 seconds
Response time
IP65/66/67
Degree of protection (IP class)
C4H10, C3H8O, C3H6O, C2H6O, C4H8O2, C2H4, C6H14, Unspecified and more
Substances
See all relevant substances
Open full specifications

Highlights

The Dräger PIR 3000 is an explosion proof infrared gas detector for continuous monitoring of combustible gases and vapors. Based on a stainless steel SS 316 enclosure as well as on a good measuring performance, this transmitter offers an excellent price-performance-ratio.

Failsafe infrared technology and low cost of ownership

The superior performance characteristics of infrared technology (such as poison immune and "fail-safe" operation) have been known and valued in gas detection for many years. The PIR 3000 now offers these performance benefits more affordably, combined More information

Smart and flexible

The PIR 3000 offers a gas library with three gas categories: methane, propane and ethylene. Therefore, nearly all hydrocarbons are detectable. In addition, temperature-compensated linearisation curves allow for signal output for individual substances More information

Suitable for the harshest conditions

Based on its exceptional product quality, the PIR 3000 offers high reliability and excellent measuring performance, in relation to long-term stability. With GRP junction box and 316 stainless steel enclosure, a temperature range of - 40 to + 65 °C (- More information

Performance features

  • Temperature-compensated and non-imaging optics
  • Gas library with 3 gas categories: Methane, propane and ethylene (typical of most hydrocarbons), performance approved in accordance with IEC 60079
  • Performance approval (in accordance with IEC 60079) for  More information

360° Product View

Draeger PIR 3000 360

Specifications

Infrared
Measuring Principle
<= 30 seconds
Response time
IP65/66/67
Degree of protection (IP class)
C4H10, C3H8O, C3H6O, C2H6O, C4H8O2, C2H4, C6H14, Unspecified and more
Substances
See all relevant substances

Key Facts

Type
Transmitter
Measuring Principle
Infrared
Response time
<= 30 seconds
Cable entry
M25 or 3/4" NPT
Display
Intrinsic Safety
Flameproof
Increased Safety
SIL
SIL 2 (IEC 61508-2)
4-20 mA
Bus
HART®
Wireless

Technical Data

Power Supply
10 to 30 VDC
Temperature (operation)
-40°C - 65°C
Humidity
0 to 100% r.h.
Pressure (hPa)
700 - 1300
Dimensions (H × W × D)
17x3.7x3.7 cm
Weight
1.21 lb
Housing Material
Stainless steel SS 316
Degree of protection (IP class)
IP65/66/67

Approvals

ATEX
IECEx
UL
CSA
CE marking
GOST (EAC)
Performance approval
Shipping approval
FM

Dräger VOICE
Your hazmat-based safety product finder

Relevant information and specific recommendations of safety equipment for more than 1,500 hazardous substances.

See the whole Product System.

This product is part of a Dräger system solution. Combine it with the following system components.

Connective Products

Controller - Dräger REGARD® 3900 Series
Dräger REGARD® 3900 Series
  • Standalone control system with up to 16 configurable measuring channels
  • Modular setup for plant-specific customization
More Information
Controller - Dräger REGARD® 7000
Dräger REGARD® 7000
  • Highly expandable control and analysis system
  • Monitors various gases and vapours
  • Suitable for complex gas warning systems
More Information
Sensors for Fixed Gas Detectors - DrägerSensor® IR
DrägerSensor® IR
  • Monitoring of flammable gases and vapors and carbon dioxide
  • Can replace catalytic ex-sensors
  • Robust and long-life sensors
More Information

Accessories

Calibration adapter
Calibration adapter
Transmitter calibration (with mounted splash guard), up to wind force 10 Bft, fitted as standard.
Order No.: 68 10 859
Duct Mount Kit
Duct Mount Kit
Enables mounting of the transmitter directly in to pipes and ducts, includes maintenance position for simple calibration.
Order No.: 68 10 995
Process adapter
Process adapter
Sampling or process applications with gas inlet and outlet.
Order No.: 68 11 330
Splash guard
Splash guard
Guards the measuring cuvette against dirt and dust, water-repellent, fitted as standard.
Order No.: 68 10 796
Weather Guard
Weather Guard
Double-walled enclosure to prevent dirt deposits, e.g. salt crust. Improves resistance to extreme weather conditions.
Order No.: 68 11 135

Downloads

Download product information, instructions for use and other important files.
Next Steps

Get in touch with Dräger

Envelop Icon
Draeger Arabia Co.Ltd.
​​Fax:0118288222 Not all products, features, or services are for sale in all countries. Please contact your local Dräger representative for more information.
​​P.O.Box 365642 Riyadh 11393 Kingdom of Saudi Arabia