Dräger X-am^® 5000

• ​1 to 5 gas detection device
  
• for personal air monitoring 
  
• detection of flammable and toxic gases and organic vapours as well as oxygen and harmful concentrations
  

Dräger X-am^® 5600

• ​1 to 6 gas detection device
  
• for personal air monitoring 
  
• detection of explosive, flammable and toxic gases as well as vapours and oxygen
  

Dräger X-am^® 8000

• ​1- to 7 gas detection device
  
• for clearance measurement
  
• detection of toxic and combustible gases as well as vapours and oxygen
  

Dräger Pac^® 8000

• ​for personal air monitoring 
  
• detection of 29 different gases – including special gases such as nitrogen dioxide, ozone or phosgene
  
• non-disposable
  

Dräger X-am^® 5800

• 1 to 6 gas detection device

• for personal air monitoring 
• detection of flammable gases/vapours, toxic gases as well as oxygen
• System component of Dräger Gas ...

Dräger X-am^® 2500

• ​1 to 4 gas detection device
  
• for personal air monitoring 
  
• detection of flammable gases and vapours as well as O₂, CO, NO₂, SO₂ and ...

Dräger X-am^® 3500

• ​1 to 4 gas detection device
  
• for clearance measurement
  
• detection of flammable gases and vapours as well as O₂, CO, H₂S, NO₂ and ...

Dräger X-am^® 2800

• ​1 to 4 gas detection device
• for personal air monitoring 
• detection of flammable gases and vapours as well as O₂, CO, NO₂, SO₂ and H₂S

DrägerSensor XXS

• ​monitoring of toxic gases and lack of oxygen
  
• compatible with: Pac series and X-am family
  
• measuring range: in vol.-% and ppm
  

DrägerSensor XS

• ​monitoring of toxic gases and oxygen deficiency including hydrides, amines, organic vapours
  
• compatible with: X-am 3000 and X-am 7000
  
• measuring range: in vol.-% and ppm
  

Dräger Catalytic Ex-Sensors

• ​monitoring of explosive mixtures
  
• high poisoning resistance to silicones and H₂S
  
• compatible with: X-am family
  
• measuring range: lower explosion limit up to 100 ...

PID sensors

• ​detection of volatile organic compounds in low concentrations
• compatible with: X-am 7000 and X-am 8000 – selective benzene measurement with pre-tubes possible
• measuring range: in ppm and ...

Dräger Infrared Sensors

• ​monitoring of explosive mixtures and CO₂
  
• recommended for frequent occurrence of explosive gases
  
• compatible with: X-am 5600 / 7000 / 8000
  
• measuring range: lower ...

Dräger Short-term Tubes

• ​results are directly shown at the end of the measurement process
  
• spot measurement for more than 500 different gases 
  
• short measurement time: between 5 seconds to 15 ...

Dräger Sampling Tubes and Systems

• ​analysis of the sample in a laboratory
  
• measurement of complex compounds and mixtures of substances possible 
  
• detection of low concentrations possible 
  

Dräger X-act^® 5000 Basic

• ideal for a high number of strokes
• display for clear readability of results
• can be used in explosive areas

Dräger accuro

• for spot measurements with a limited number of strokes
  
• integrated stroke counter for safe control
  
• easy to operate with one hand
  
• can be used in explosive ...

Dräger Polytron^® SE Ex

• Sensor: Catalytic bead sensor
• Installation: Increased Safety
• Interface: 3-wire cable
• IP class: IP 66
• Special: Sensing Head

Dräger PEX 3000

• ​Sensor: Catalytic Bead Sensor
• Installation: with Increased Safety 
• Interface: 4-20 mA
• IP class: IP66
• Special: -

Dräger Polytron 5200 CAT

• ​Sensor: Catalytic bead sensor
• Installation: Increased Safety or flameproof
• Interface: 4-20 mA, Relays
• IP class: IP 65/66/67
• Special: Display

Dräger Polytron^® 8200 CAT

• ​Sensor: Catalytic bead sensor
• Installation: Increased Safety or flameproof
• Interface: 4-20 mA, Relays, Bus, HART ^®
• IP class: IP65/66/67 and SIL2
• Special: ...

Dräger Polytron^® 5100 EC

• Sensor: Electrochemical Sensor
  
• Installation: with Increased Safety or flameproof
• Interface: 4-20 mA, Relays
• IP class: IP 65/66/67
• Special: displays 
  

Dräger Polytron^® 6100 EC WL

• Sensor: Electrochemical Sensor
• Installation: Intrinsic Safety
• Interface: Wireless
• IP class: 66/67 and SIL2
• Special: Wireless 

Dräger Polytron^® 7000

• ​Sensor: Electrochemical Sensor
• Installation: Intrinsic Safety
• Interface: 4-20 mA, Bus, HART ^®
• IP class: 66/67 and SIL2
• Special: Display

Dräger Polytron^® 8100 EC

• ​Sensor: Electrochemical Sensor
• Installation: Increased Safety or flameproof
• Interface: 4-20 mA, Relays, Bus, HART ^®
  
• IP class: IP65/66/67 and SIL2
• Special: ...

Electrochemical DrägerSensor^®

• ​continuous monitoring of poisonous gases and oxygen
• compatible with: Polytron 8100, Polytron 7000, Polytron 6100, Polytron 5100, Polytron 3000, PointGard 2100
• measuring range: ppm, ...

Catalytic Bead DrägerSensors

• ​Seamless monitoring of combustible gases and vapours
• Compatible with: Polytron 8200, Polytron 5200, PointGard 2200, PEX 3000, Polytron SE Ex
• B121 measuring range: LEL in Vol.%, ppm

Dräger X-plore^® Rd40

• ​standard thread connection Rd40 according to EN 148-1
  
• robust aluminium housing
  
• to be used with half and full face masks with standard thread connection Rd40 according to EN ...

Dräger X-plore^® Bayonet

• Dräger specific Bayonet connection
  
• lateral position of the filters for an unrestricted field of vision and even weight distribution
  
• to be used with X-plore 3300 or X-plore 3500 half ...

Dräger X-plore^® 4700

• ​standard thread connection Rd40 according to EN 148-1
  
• mask body made from TPE (universal size) or silicone (two sizes)
  
• to be used with all filters with standard thread connection ...

Dräger Panorama^® Nova

• ​different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
  
• EPDM or silicone mask body, visor made of triplex or ...

Dräger X-plore^® 6530

• ​standard thread connection Rd40 according to EN 148-1
  
• EPDM mask body, visor made of triplex or PC
  
• to be used with all filters with standard thread connection Rd40
  

Dräger X-plore^® 6300

• ​standard thread connection Rd40 according to EN 148-1
• EPDM mask body, visor made of PMMA
• to be used with all filters with standard thread connection Rd40

Dräger X-plore^® 5500

• ​Dräger specific bayonet connection – lateral position of the filters 
  
• EPDM mask body, visor made of triplex or PC
  
• to be used in combination with X-plore Bayonet ...

Dräger X-plore^® 3300/3500

• ​Dräger specific bayonet connection (twin-filter system)
  
• mask body made from Soft-TPE or DrägerFlex material (silicon free)
  
• to be used with X-plore Bayonet filters
  

Dräger X-plore^® 8000

• Protection without breathing resistance
• Different breathing filters and head / face pieces available
• Protection class IP65
• For Ex zones 1, 2, 21 and 22
  

Dräger X-plore^® 8000 Filters

• Particle, gas and combination filters available
• To be used with powered air purifying respirator X-plore^® 8500 or 8700 (EX)
• Optional pre- and odour filter

Dräger CPS 7900

• ​SCBA worn inside the protective suit 
  
• five suit sizes (S-XXL)
  
• side zipper
  
• suit material D-mex, reusable 
  

Dräger CPS 7800

• ​SCBA worn over the protective suit 
  
• five suit sizes (S-XXL)
  
• diagonal zipper for easy donning and doffing without assistance
  
• suit material D-mex, ...