1,1-DimethoxyethaneC4H10O2
Details
| CAS-No.: | 534-15-6 |
|---|---|
| UN-No.: | 2377 |
| EC-No.: | 208-589-8 |
| Hazard identification number: | 33 |
Warning sign
- 33
- 2377
Hazard signs
- H: 225
Highly flammable liquid and vapour
- P: 210
Keep away from heat/
sparks/open flames/hot
surfaces. — No smoking. - P: 233
Keep container tightly closed. - P: 240
Ground/bond container and
receiving equipment. - P: 241
Use explosion-proof
electrical/ventilating/lighting/…/
equipment. - P: 242
Use only non-sparking tools. - P: 243
Take precautionary measures against static discharge. - P: 403 + 235
Store in a well-ventilated place. Keep cool
No statement for this group.
No GHS Classification available at the moment.
| Melting point: | |
|---|---|
| Boiling Point: | |
| Density (at 20 °C, if not notified otherwise): | 0,85 g/cm3 |
| Ionization: | 10. ± 10. eV |
| Flash Point: | |
| Vapour Pressure (at 20 °C, if not notified otherwise): | 182 (20°C) hPa |
| Lower Explosive Limit: | 1,73 Vol.-% |
Details
| 3 | Flammability: Flammable with normal temperature | |
| 1 | Instability: Instable when heated | |
| 2 | Health: Dangerous | |
| DG-EA: | 2YE | |
Also known as:
- Acetaldehyddimethylacetal
- C4H10O2
- Dimethylacetal
- Ethylidendimethylether
- Ethylidene dimethyl ether
- Solvenon M
Suitable products for 1,1-Dimethoxyethane C4H10O2
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Gas Detection Tubes
Dräger Short-term Tubes
- Short-term Tubes
- results are directly shown at the end of the measurement process
- spot measurement for more than 500 different gases
- short measurement time: between 5 seconds to 15 ...
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- display for clear readability of results
- can be used in explosive areas
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Filters
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Masks
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger Panorama® Nova
- Single-filter full-face mask
- different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
- EPDM or silicone mask body, ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
