alpha-Methyl styreneC9H10

CAS-No.:
98-83-9
UN-No.:
2303
EC-No.:
202-705-0
Hazard identification number:
30
Warning sign:
  • 30
  • 2303
Hazard signs
GHS02
GHS07
GHS09
GHS08
Occupational exposure limit
TRGS 900 (DE/INT)
  • AGW (mg/m3) 250
  • AGW (ppm) 50
  • H: 226
    Flammable liquid and vapour
  • H: 304
    May be fatal if swallowed and enters airways
  • H: 317
    May cause an allergic skin reaction
  • H: 319
    Causes serious eye irritation
  • H: 335
    May cause respiratory irritation
  • H: 361fd
    Suspected of damaging fertility. Suspected of damaging the unborn child.
  • H: 411
    Toxic to aquatic life with long lasting
    effects
  • Melting point:
    -23 °C
  • Boiling Point:
    166 °C
  • Density (at 20 °C, if not notified otherwise):
    0,91 g/cm3
  • Ionization:
    8.3 ± 0.1 eV
  • Flash Point:
    46 °C
  • Ignition Temperature:
    445 °C
  • Vapour Pressure (at 20 °C, if not notified otherwise):
    2,97 hPa
  • Lower Explosive Limit:
    0.9 Vol.-%
  • Upper Explosive Limit:
    6.6 Vol.-%
  • Hazardous Effects:
    Ss
Also known as:
  • (1-Methylethenyl)benzene
  • .beta.-Phenylpropylene
  • 1-Methyl-1-phenylethene
  • 1-Methyl-1-phenylethylene
  • 2-Phenylpropene
  • Alpha methyl styrene
  • alpha-Methylstyrene
  • Alpha-Methylstyrene Monomer
  • AMS
  • Isopropenyl benzene
  • Isopropenylbenzene
  • prop-1-en-2-ylbenzene
  • α-Methylstyrene

Get in touch with Dräger

If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.

Suitable products for alpha-Methyl styrene C9H10

Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.

Gas Detection Tubes

Dräger Short-term Tubes

Dräger Short-term Tubes

  • ​results are directly shown at the end of the measurement process
  • spot measurement for more than 500 different gases 
  • short measurement time: between 5 seconds to 15 ...

More details
Dräger Sampling Tubes and Systems

Dräger Sampling Tubes and Systems

  • ​analysis of the sample in a laboratory
  • measurement of complex compounds and mixtures of substances possible 
  • detection of low concentrations possible 

More details
Dräger X-act® 5000 Basic

Dräger X-act® 5000 Basic

  • ideal for a high number of strokes
  • display for clear readability of results
  • can be used in explosive areas

More details
Dräger accuro

Dräger accuro

  • for spot measurements with a limited number of strokes
  • integrated stroke counter for safe control
  • easy to operate with one hand
  • can be used in explosive ...

More details

Filters

Dräger X-plore® Rd40

Dräger X-plore® Rd40

  • ​standard thread connection Rd40 according to EN 148-1
  • robust aluminium housing
  • to be used with half and full face masks with standard thread connection Rd40 according to EN ...

More details
Dräger X-plore® Rd90 Filters

Dräger X-plore® Rd90 Filters

  • ​Dräger specific Rd90 connection
  • robust aluminium housing
  • to be used in combination with X-plore 4700 half masks

More details
Dräger X-plore® Bayonet

Dräger X-plore® Bayonet

  • Dräger specific Bayonet connection
  • lateral position of the filters for an unrestricted field of vision and even weight distribution
  • to be used with X-plore 3300 or X-plore 3500 half ...

More details

Masks

Dräger X-plore® 4700

Dräger X-plore® 4700

  • ​standard thread connection Rd40 according to EN 148-1
  • mask body made from TPE (universal size) or silicone (two sizes)
  • to be used with all filters with standard thread connection ...

More details
Dräger Panorama® Nova

Dräger Panorama® Nova

  • ​different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
  • EPDM or silicone mask body, visor made of triplex or ...

More details
Dräger X-plore® 6530

Dräger X-plore® 6530

  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of triplex or PC
  • to be used with all filters with standard thread connection Rd40

More details
Dräger X-plore® 6300

Dräger X-plore® 6300

  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of PMMA
  • to be used with all filters with standard thread connection Rd40

More details
Dräger X-plore® 5500

Dräger X-plore® 5500

  • ​Dräger specific bayonet connection – lateral position of the filters 
  • EPDM mask body, visor made of triplex or PC
  • to be used in combination with X-plore Bayonet ...

More details
Dräger X-plore® 3300/3500

Dräger X-plore® 3300/3500

  • ​Dräger specific bayonet connection (twin-filter system)
  • mask body made from Soft-TPE or DrägerFlex material (silicon free)
  • to be used with X-plore Bayonet filters

More details

Powered Air Purifying Respirators and Filters

Dräger X-plore® 8000

Dräger X-plore® 8000

  • Protection without breathing resistance
  • Different breathing filters and head / face pieces available
  • Protection class IP65
  • For Ex zones 1, 2, 21 and 22

More details
Dräger X-plore® 8000 Filters

Dräger X-plore® 8000 Filters

  • Particle, gas and combination filters available
  • To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
  • Optional pre- and odour filter

More details

Protective Suits

Dräger CPS 7900

Dräger CPS 7900

  • ​SCBA worn inside the protective suit 
  • five suit sizes (S-XXL)
  • side zipper
  • suit material D-mex, reusable 

More details
Dräger CPS 5800

Dräger CPS 5800

  • SCBA worn over the protective suit
  • four suit sizes (M-XXL)
  • diagonal zipper for donning without assistance
  • suit material Zytron® 500, limited ...

More details
Dräger CPS 7800

Dräger CPS 7800

  • ​SCBA worn over the protective suit 
  • five suit sizes (S-XXL)
  • diagonal zipper for easy donning and doffing without assistance
  • suit material D-mex, ...

More details
Dräger CPS 6900

Dräger CPS 6900

  • ​SCBA worn inside the protective suit 
  • five suit sizes (S-XXL)
  • side zipper for donning without assistance 
  • suit material Umex, reusable

More details
Dräger CPS 6800

Dräger CPS 6800

  • SCBA worn over the protective suit
  • five suit sizes (S-XXL)
  • diagonal zipper for donning without assistance 
  • suit material Umex, reusable

More details
Dräger CPS 5900

Dräger CPS 5900

  • ​SCBA worn inside the protective suit
  • five suit sizes (S-XXL)
  • side zipper
  • suit material Zytron® 500, limited use

More details
Dräger WorkMaster Industry

Dräger WorkMaster Industry

  • SCBA worn over the protective suit
  • four suit sizes (M-XXL)
  • zipper on the back
  • suit material Symex, reusable

More details
Dräger SPC 4400 / SPC 4800 / SPC 4900

Dräger SPC 4400 / SPC 4800 / SPC 4900

  • Overall with hood (SPC 4400), protective suit with facial cuff (SPC 4800) or full-body protective suit with visor (SPC 4900)
  • CPM (single use) or CLF (limited use)
  • Antistatic version ...

More details
SPC 4700 with CVA 0700

SPC 4700 with CVA 0700

  • ​Ventilated splash-protective suits
  • Continuous supply of breathing air and cooling airflow (type 3 suit)
  • Coated barrier protection material CPM or carrier fleece material CLF
  • Limited ...

More details

Get in touch with Dräger

If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.

Discover more: Dräger VOICE - The hazmat-based safety product finder

You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!

VOICE Hazmat