Diethylene-glycol monobutyl etherC8H18O3

CAS-No.:
112-34-5
EC-No.:
203-961-6
Hazard signs
GHS07
Occupational exposure limit
TRGS 900 (DE/INT)
  • AGW (mg/m3) 67
  • AGW (ppm) 10
  • H: 319
    Causes serious eye irritation
  • Melting point:
    -68 °C
  • Boiling Point:
    231 °C
  • Density (at 20 °C, if not notified otherwise):
    0,96 g/cm3
  • Flash Point:
    100 °C - 110 °C
  • Ignition Temperature:
    225 °C
  • Vapour Pressure (at 20 °C, if not notified otherwise):
    0,03 hPa
  • Lower Explosive Limit:
    0.77 Vol.-%
  • Upper Explosive Limit:
    5.9 Vol.-%
Also known as:
  • 1-Hydroxy-3,6-dioxadecan 2-(2-Butoxyethoxy)ethanol 2-Hydroxy-2-butoxy-diethylether 3,6-Dioxa-1-decanol BDGE Butadigol Butoxyethoxyethanol Butyl carbitol Butyl CARBITOL™ Solvent Butyl Diethoxol Butyl diglycol Butyl Diglycol ether Butyl digol Butyl dio
  • 2-(2-Butoxyethoxy) ethanol
  • 2-(2-butoxyethoxy)ethanol
  • 2‐(2‐butoxyethoxy)ethanol
  • Butoxydiglykol
  • Butyl Dioxitol
  • butyldiglycol ether
  • Diethylene glycol butyl ether
  • Diglykolmonobutylether

Get in touch with Dräger

If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.

Suitable products for Diethylene-glycol monobutyl ether C8H18O3

Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.

Gas Detection Tubes

Dräger Sampling Tubes and Systems

Dräger Sampling Tubes and Systems

  • ​analysis of the sample in a laboratory
  • measurement of complex compounds and mixtures of substances possible 
  • detection of low concentrations possible 

More details
Dräger X-act® 5000 Basic

Dräger X-act® 5000 Basic

  • ideal for a high number of strokes
  • display for clear readability of results
  • can be used in explosive areas

More details
Dräger accuro

Dräger accuro

  • for spot measurements with a limited number of strokes
  • integrated stroke counter for safe control
  • easy to operate with one hand
  • can be used in explosive ...

More details

Filters

Dräger X-plore® Rd40

Dräger X-plore® Rd40

  • ​standard thread connection Rd40 according to EN 148-1
  • robust aluminium housing
  • to be used with half and full face masks with standard thread connection Rd40 according to EN ...

More details
Dräger X-plore® Rd90 Filters

Dräger X-plore® Rd90 Filters

  • ​Dräger specific Rd90 connection
  • robust aluminium housing
  • to be used in combination with X-plore 4700 half masks

More details
Dräger X-plore® Bayonet

Dräger X-plore® Bayonet

  • Dräger specific Bayonet connection
  • lateral position of the filters for an unrestricted field of vision and even weight distribution
  • to be used with X-plore 3300 or X-plore 3500 half ...

More details

Masks

Dräger X-plore® 4700

Dräger X-plore® 4700

  • ​standard thread connection Rd40 according to EN 148-1
  • mask body made from TPE (universal size) or silicone (two sizes)
  • to be used with all filters with standard thread connection ...

More details
Dräger Panorama® Nova

Dräger Panorama® Nova

  • ​different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
  • EPDM or silicone mask body, visor made of triplex or ...

More details
Dräger X-plore® 6530

Dräger X-plore® 6530

  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of triplex or PC
  • to be used with all filters with standard thread connection Rd40

More details
Dräger X-plore® 6300

Dräger X-plore® 6300

  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of PMMA
  • to be used with all filters with standard thread connection Rd40

More details
Dräger X-plore® 5500

Dräger X-plore® 5500

  • ​Dräger specific bayonet connection – lateral position of the filters 
  • EPDM mask body, visor made of triplex or PC
  • to be used in combination with X-plore Bayonet ...

More details
Dräger X-plore® 3300/3500

Dräger X-plore® 3300/3500

  • ​Dräger specific bayonet connection (twin-filter system)
  • mask body made from Soft-TPE or DrägerFlex material (silicon free)
  • to be used with X-plore Bayonet filters

More details

Powered Air Purifying Respirators and Filters

Dräger X-plore® 8000

Dräger X-plore® 8000

  • Protection without breathing resistance
  • Different breathing filters and head / face pieces available
  • Protection class IP65
  • For Ex zones 1, 2, 21 and 22

More details
Dräger X-plore® 8000 Filters

Dräger X-plore® 8000 Filters

  • Particle, gas and combination filters available
  • To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
  • Optional pre- and odour filter

More details

Get in touch with Dräger

If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.

Discover more: Dräger VOICE - The hazmat-based safety product finder

You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!

VOICE Hazmat