Dräger Flame 2500 (IR3)End of Sales
With its triple IR sensor The Dräger Flame 2500 detects hydrocarbon-based fires even over greater distances. Moreover, it offers a high reliability against false alarms.
Images and Videos
Downloads
Dräger Flame 2xx0 Host Software VC
Technical Data
Key Facts
- Field of view
- Horizontal 100°; Vertical 95°
- Response time
- Typically 5 seconds
- Cable entry
- 2 × 3/4" – 14NPT or 2 × M25 × 1.5 mm
- Detection Technology
- IR3
- Flameproof
- ✓
- Increased Safety
- ✓
- SIL
- ✓ (SIL 2)
- 4-20 mA
- ✓
- HART®
- ✓
- RS-485
- ✓
- Relay
- ✓
Fuel ft / m
- n-Heptane / Gasoline
- 215 / 65
- Diesel Fuel / JP5 / Kerosene
- 150 / 45
- Ethanol 95 %
- 135 / 40
- Methanol
- 115 / 35
- IPA (Isopropyl Alcohol)
- 135 / 40
- Hydrogen
- Methane
- 150 / 45
- LPG
- 150 / 45
- Polypropylene Pellets
- 115 / 35
- Ammonia
- Silane
- Office Paper
- 83 / 25
Technical Data
- Power Supply
- 24 V DC
- Temperature (operation)
- -55°C - 75°C
- Humidity
- 0 to 95 % r.h., non-condensing
- Dimensions (H × W × D)
- 0.1x0.12x0.16 m
- Weight
- 2.8 Kg
- Housing Material
- Stainless steel SS 316 or Heavy duty copper free aluminum, red epoxy enamel finish
- Degree of protection (IP class)
- IP66/67
Approvals
- ATEX
- ✓
- IECEx
- ✓
- UL
- ✗
- CSA
- ✓
- CE marking
- ✓
- GOST (EAC)
- ✓
- Performance approval
- ✓
- Shipping approval (DNV & MED)
- ✓
- FM
- ✓
Related Products and Associated Offerings
Flame Simulator
The Flame Simulator emits radiation in a unique sequential pattern corresponding to and recognizable by the detector as fire. This allows the detectors to be tested under simulated fire conditions without the associated ...
Laser Pointer
Does the detector cover the area that needs protection? Is it located correctly and does the detector’s cone of vision cover the most dangerous spot? This accessory enables the installer to optimise detector location ...
Weather Cover
The Weather Cover protects the detector from different weather conditions, such as snow or rain.
Air Shield
The Air Shield allows the installation of detectors of the Dräger Flame 2000 series under tough environmental conditions where they may be exposed to oil vapors, sand, dust and other particulate matter.
Dräger REGARD® 3900 Series
The devices of the Dräger REGARD® 3900 series can be used as standalone controllers. You can configure up to 16 measuring channels. In addition, the modular setup enables you to customise the control units to the ...
Dräger REGARD® 7000
The Dräger REGARD® 7000 is a modular and therefore highly expandable analysis system for monitoring various gases and vapours. Suitable for gas warning systems with various levels of complexity and numbers of ...
Dräger Flame 1500 (IR3)Replacement Product
The Dräger Flame 1500 flame detector uses its triple IR sensor to detect hydrocarbon fires even at great distances. It offers you high reliability against false alarms.
