The comprehensive gas warning system for your building
Quick Links
SpecificationsAccessoriesDownloadsContact us
Catalytic Bead Sensor
Measuring Principle
Response time
IP65
Degree of protection (IP class)
Open full specifications
Highlights
The Dräger VarioGard 3200 CAT is a digital transmitter with an integrated catalytic DrägerSensor. It detects flammable gases such as methane, LPG and hydrogen in non Ex areas, such as underground garages and laboratories.
Digital function
The Dräger VarioGard 3200 CAT is connected with the controller via the digital VarioGard bus. This is how it is supplied with electricity and how it transmits its measuring results. You can easily control the entire VarioGard system via the VarioGard … More information bus.
High reliability
The Dräger VarioGard 3200 CAT is equipped with a catalytic DrägerSensor. This sensor measures the concentration of flamable gases in the ambient air. The measured values are transmitted digitally to the controller and displayed there. An alarm is tri … More informationggered if the gas concentration exceeds one or more of the limit values configured.
Easy operation
Operation is extremely easy. You can make all configurations comfortably from the controller using VarioGard software. You can configure and monitor four current limit values and four averages over time for each transmitter. The alarms are optically … More informationand acoustically displayed on the transmitter and transmitted to the controller. A three-colour LED indicates the operating status of the transmitter. The calibration is controlled using a magnetic wand via contact points.
Individually configurable
The VarioGard 3200 CAT is adapted to your system. Depending on the application, three different different gas libraries are available: LPG for garages, CH4 for methane monitoring and H2 for laboratories that do not require explosion protection.
Focus on sustainability
The VarioGard transmitter aligns with Dräger's sustainability philosophy by incorporating durable DrägerSensors, enabling an extended service life for the device. The new housing design optimises material usage compared to its predecessor. Additional … More informationly, existing accessories and electronic spare parts from the previous series remain compatible, reducing waste. Dräger also facilitates the recycling of old devices by accepting them for disposal.
Specifications
Catalytic Bead Sensor
Measuring Principle
Response time
IP65
Degree of protection (IP class)
Key Facts
Type
Transmitter
Measuring Principle
Catalytic Bead Sensor
Response time
Cable entry
M20 x 1.5
Display
no
Intrinsic Safety
no
Flameproof
no
Increased Safety
no
SIL
no
4-20 mA
no
Bus
yes
HART®
no
Wireless
no
Technical Data
Power Supply
16 to 30 V DC, 3-wire
Temperature (operation)
-20°C - 50°C
Humidity
10 to 95 % r.h., non-condensing
Pressure (hPa)
700 - 1300
Dimensions (H × W × D)
11x12x6 cm
Weight
400 g
Housing Material
Plastic ABS
Degree of protection (IP class)
IP65
Approvals
ATEX
no
IECEx
no
UL
no
CSA
no
CE marking
yes
GOST (EAC)
no
Performance approval
no
Shipping approval
no
FM
no
See the whole Product System.
—
This product is part of a Dräger system solution. Combine it with the following system components.