Dräger X-am® 2500

The Dräger X-am® 2500 was especially developed for use as personal protection. The 1 to 4 gas detector reliably detects combustible gases and vapours, as well as O2, CO, NO2, SO2 and H2S. Reliable and fully mature measuring technology, durable sensors and easy handling guarantee a high degree of safety with extremely low operating costs.

Durable electrochemical sensors

Fully developed, high performance Dräger sensors in an extra small format for CO, H2S, O2, SO2and NO2 gases enable safe use in industry, mining and in refineries. The impressive hydrogen sulphide sensor has a high resolution, so it can reliably measure even very low workplace limits. The non-consumptive and lead-free sensor for oxygen is characterized by an especially long service life of more than 5 years. Dräger´s CO and H2S sensors also have this long service life expectation, so they contribute to especially low operating costs.

Poison resistant Ex sensor

The innovative, catalytic Ex sensor is impressive due to its high resistance to silicone and hydrogen sulphide. Together with the high degree of drift stability, this resistance enables an extraordinarily long service life of more than 4 years. Its sensitivity with regard to flammable gases and vapours is tested in accordance to measurement performance approval IEC/EN 60079-29-1 from methane to nonane. This approval also demonstrates the suitability of this instrument for primary explosion protection, e.g. for use in refineries and in the chemical industry.

Maximum safety

The Dräger X-am® 2500 has Ex approval for zone 0, so it is clearly designed for very high user safety in areas subject to explosion hazard. The functional design ensures that gas can enter from above and from the front.

Maintenance: fast, easy, inexpensive

From functional test with gas to complete documentation, users have access to practical solutions that provide safety for implementation at any time. The Dräger Bump Test Station, which does not require a local power source, and the automatic Dräger X-dock testing and calibration station for comprehensive equipment management are ideal system additions that save time and effort. Together with the Dräger X-dock, the high quality Dräger sensors enable quick bump tests of 8 to 15 seconds1 with very low gas consumption. This significantly reduces your equipment operating costs.

1 With standard sensors: CH4, O2, CO, H2S

Diffusion or pump mode

For clearance measurements for tanks and shafts or when searching for leaks, an optional external pump with a hose up to 45 m long is the optimum solution. The pump starts automatically when the measuring instrument is connected. The switch from diffusion to pump operation can be handled quickly and easily without tools or screws.

Ergonomic and robust

Thanks to its low weight and ergonomic design, the Dräger X-am 2500 offers a high degree of wearing comfort. The practical two button control panel and easy menu navigation allow the instrument to be used intuitively, despite its comprehensive functionality. The integrated protective rubber coating and sensors that are not sensitive to shock provide additional safety in case of impacts or vibrations. Moreover, the Dräger X-am 2500 is not sensitive to electromagnetic radiation, e.g. from wireless devices. The Dräger X-am 2500 is water and dust resistant in accordance with protection class IP 67, so it remains fully functional even if it falls accidentally into the water.

Reliable power supply

The Dräger X-am 2500 can operate with either alkaline batteries or with rechargeable NiMH batteries. This enables a reliable power supply for more than 12 hours. Depending on the requirements, the batteries can be charged either in the workshop or in a vehicle. Operating time without Ex sensor is typically more than 250 hours.

Downloads

Product information: Dräger X-am® 2500
Product information: Dräger X-am® 2500

The Dräger X-am® 2500 was especially developed for use as personal protection. The 1 to 4 gas detector reliably detects combustible gases and vapours, as well as O2, CO, H2S, NO2 and SO2. Reliable and fully mature measuring technology, durable sensors and easy handling ensure a high degree of safety with extremely low operating costs.

Download

CC-Vision Basic 8.1.1
CC-Vision Basic 8.1.1

Release Date: 22nd March, 2024

Download

Portable Gas Detection Portfolio brochure, en
Portable Gas Detection Portfolio brochure, en

Download

Brochure: Dräger's Guide to Portable Gas Detection (PDF)
Brochure: Dräger sampling hoses for portable gas detectors
CC-Vision Software History, en
DrägerSensor & Portable Instruments Handbook (6th Edition), en
Driver for DIRA and MILO Interface
GasVision Software History, en
GasVision Version 8.0.5
IFU Rubberball Pump 9023955 de-me
IFU SP X-am 2500/2800/3500/5000/5100/5600/5800/8000 - Limited Manufacturer Guarantee - 9033743 af-me
IFU SP X-am 2500/5000/5600 - Notes on approval / Sensor data - 9033890 en
IFU X-am 2500 (MQG 0011) - Technical Manual 9033366 en
IFU X-am 2500 (MQG 0011) SW 7.n - 9033365 de-me
IFU X-am Pump - 9033744 de-me
Quick Guide X-am 2500/5000/5600
Small Case / Best Practice: Gas Detection in Steel Production ArcelorMittal Eisenhüttenstadt

Gas detectors, sensors and substances

Dräger gas detectors can be used with different sensors to measure a large number of hazardous substances. Check which sensor fits into this detector by searching for a substance. Contact our experts to get more information.

Search for substance

Please enter a substance

Product configurations

for the gas detector Dräger X-am® 2500

Utilize for 44 Substances

9 matching Sensor(s)

Technical Data

Key Facts

Measurable gases
Ex, O2, CO, H2S or NO2 or SO2
Sensorports
4
Number of gases
1 - 4
Applications
Personal Air Monitoring + Confined Space Entry
Sensor technology
CAT + EC

Technical Data

Operation time
>12h
Dimensions (W × H × D)
0.05x0.13x0.04 m
Weight
0.22 Kg
Battery type
NiMh
Degree of protection (IP class)
IP 67

Features

Dual sensors
CatEx Fullrange
D-Light
Internal pump
X-am Pump
X-zone 5500 Area Monitoring
Bump Test Station
X-dock Station

Approvals

ATEX
I M1 Ex da ia I Ma, II 1G Ex da ia IIC T4/T3 Ga
IECEx
Ex da ia I Ma, Ex da ia IIC T4/T3 Ga
c CSA us
Class I Div. 1 Group A, B, C, D, E, F, G T4/T3, A/Ex da ia IIC T4/T3 /Ga
CE
GOST (EAC)
true
Performance approval
Shipping approval (MED/DNV GL)

Compare with related Products

Get in touch with Dräger

Envelop Icon

​Draeger Singapore Pte Ltd

​Draeger​ ​Singapore​ ​Pte​ ​Ltd
61​ ​Science​ ​Park​ ​Road​ ​The​ ​Galen​ ​#04-01
Singapore​ ​117525

+65 6872 9288

Draeger Malaysia Sdn. Bhd.

​No.​ ​6,​ ​Jalan​ ​15/22,​ ​Taman​ ​Perindustrian​ ​Tiong​ ​Nam,​ ​Seksyen​ ​15,​ ​40200​ ​Shah​ ​Alam,
Selangor​ ​Darul​ ​Ehsan,​ ​Malaysia

+60 3 5526 2000

​Draeger Philippines Corporation

2504-C​ ​West​ ​Tower,​ ​Tektite​ ​Towers,​ ​Exchange​ ​Road,​ ​Ortigas​ ​Center,
Pasig​ ​City​ ​1605​ ​Metro​ ​Manila,​ ​Philippines

+63 2 8470 3825

Draeger Hong Kong Limited.

Room​ ​1701-02,​ ​17/F,​ ​APEC​ ​Plaza,​ ​49​ ​Hoi​ ​Yuen​ ​Road,​ ​Kwun​ ​Tong,​ ​Kowloon​ ​999077,​ ​Hong​ ​Kong

+852 2877-3077

Note:​ ​Not​ ​all​ ​products,​ ​features​ ​or​ ​services​ ​are​ ​for​ ​sale​ ​in​ ​all​ ​countries.​ ​Please​ ​contact​ ​your​ ​local​ ​Dräger​ ​representative​ ​for​ ​more​ ​information.