
Dräger X-dock 5300/6300/6600
Contact usDräger X-dock 5300/6300/6600
As versatile as your requirements
The X-dock is available in a wide variety of versions. The X-dock 5300 includes a master station including a module for a gas detection instrument from the X-am or Pac family. It is immediately ready to use. The X-dock 6300 and 6600 versions can be configured freely. They consist of a master station and can be expanded with up to 10 modules for X-am and/or Pac gas detection instruments.
Easier than ever before
Insert the device, close the lid and remove it when the indicator goes “green” – a test with the X-dock is just that simple. It immediately detects all sensor combinations. Furthermore, the X-dock automatically tests and adjusts when all required test gases are connected. The station works independently and can be configured and used without a PC. The station is operated via an integrated touchscreen. A gas detection instrument is detected as soon as it is inserted, and all data is documented in the database.
Always an up-to-date fleet of devices
The X-dock helps you to keep your devices up to date with the latest firmware. The cloud-based software solution Dräger Gas Detection Connect always provides the X-dock with the latest device firmware for X-am 2800/5800 and Pac devices too. If required, these can be updated automatically during testing or adjustment in the X-dock. The X-dock is also automatically supplied with new updates, which can be carried out locally or even remotely via web access.
Enhanced security through comprehensive documentation
Need to verify if your devices are ready for use? When was each device tested, by whom, and what were the results? The X-dock stores all relevant data and reads the collected information from the gas detection devices for later analysis — giving you full control. Additionally, with a compatible printer, you can directly print a calibration or test certificate at the stations. This ensures you are always prepared for all requirements according to T021/T023 of BG RCI and the corresponding EN standards.
Automatically reduced costs
With a reduced gas flow (300 mL/min instead of 500 mL/min) per module, you save costs on test gases. Short testing times reduce the overall maintenance efforts. The valve concept requires one pump only, resulting in the need for less wear and tear parts. The valves automatically switch the test gases and – when connected – the compressed air as well.
Significant time savings
You can connect up to 10 modules to the X-dock at the same time and thus test the gas detectors in parallel, but also independently of each other. The automatic bump test also saves time and gas. Test times (opening of the gas valves) of less than 10 seconds are possible for standard gases! Compared to the Dräger Bump Test Station, the bump test has been optimized even further.1 All Dräger test gas cylinders are already stored in the database - when you enter the part number, the required fields for the gas configuration are automatically filled in. This saves you having to enter them manually.
1 for standard sensors: CH4, O2, CO, H2S
Additional benefits
- Touchscreen operation at the master station
- Three configurable test routines
- Automatic leak tests
- Automatic alarm testing
- Optional charging function for X‑am 1/2/5x00, 3500/8000
- Replaceable sealing cartridge
- 12 V operation (e.g., in vehicles) possible
- upgradeable to a maximum of 10 modules (X-dock 6300/6600)
- Sensor response time verification
Fleet management software: Expand your options
The gas detector fleet always under control! With Dräger Gas Detection Connect, you can network the X-dock stations for greater efficiency. Your benefits:
- Evaluated data from the calibration system and the gas detectors at a glance
- Certificates and reports, tests performed, alarms automatically documented
- Edit device configurations centrally without having to bring each device into the workshop
- Email notifications when inspection is required or intervals have expired
- Monitor operational readiness and utilization of test stations
Images and Videos
Downloads

X-dock 5300/6300/6600 Product Information
The Dräger X‑dock series provides you with full control of your portable Dräger gas detection instruments. Automatic bump tests and calibrations with reduced test gas consumption and short testing times save time and money. Comprehensive documentation and evaluations provide you with a clear overview

X-dock Frequently Asked Questions
