HydroquinoneC6H6O2
CAS-No.: | 123-31-9 |
|---|---|
UN-No.: | 3077 |
EC-No.: | 204-617-8 |
Hazard identification number: | 90 |
Warning sign: |
|
Hazard signs
Occupational exposure limit
WORKPLACE SAFETY AND HEALTH (SG)
- PEL (LT) (mg/m3) 2
- H: 302
Harmful if swallowed.
- H: 317
May cause an allergic skin reaction
- H: 318
Causes serious eye damage.
- H: 341
Suspected of causing genetic defects.
- H: 351
Suspected of causing cancer.
- H: 400
Very toxic to aquatic life
- P: 273
Avoid release to the environment.
- P: 280
Wear protective gloves/protective clothing/eye protection/face protection.
- P: 302 + 352
IF ON SKIN: Wash with plenty of soap and water.
- P: 305 + 351 + 338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
- P: 313
Get medical advice/attention.
No statement for this group.
No GHS Classification available at the moment.
Melting point:
170 °C Boiling Point:
286 °C Density (at 20 °C, if not notified otherwise):
1,36 g/cm3Ionization:
7.94 ± 0.01 eVFlash Point:
165 °C Ignition Temperature:
515 °C Hazardous Effects:
Ss,M,C
Important to know:
Substance included in the Community Rolling Action Plan (CoRAP).
Also known as:
- 1,4-Benzenediol
- 1,4-Dihydroxybenzene
- Benzene-1,4-diol
- Chinol
- Dihydroxybenzene
- Hydrochinol
- Hydroquinone
- Hydroquinone IG Hydroquinone Photo Hydroquinone Technical Idrochinone Idrochinone IG Idrochinone Photo Idrochinone tecnico
- p-Benzenediol
- Quinol
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for Hydroquinone C6H6O2
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Filters
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger Panorama® Nova
- Single-filter full-face mask
- different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
- EPDM or silicone mask body, ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 6570
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- silicone mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
