Ethylidene norborneneC9H12
Details
| CAS-No.: | 16219-75-3 |
|---|---|
| UN-No.: | 1993 |
| EC-No.: | 240-347-7 |
| Hazard identification number: | 30 |
Warning sign
- 30
- 1993
Hazard signs
Occupational exposure limit
- PEL (ST) (ppm) 5
- PEL (ST) (mg/m3) 25
- H: 226
Flammable liquid and vapour - H: 304
May be fatal if swallowed and enters airways - H: 315
Causes skin irritation - H: 317
May cause an allergic skin reaction - H: 332
Harmful if inhaled - H: 373
May cause damage to organs (state all organs affected, if known) through prolonged or repeated exposure (state route of exposure if it is conclusively
proven that no other routes of exposure cause the hazard) - H: 411
Toxic to aquatic life with long lasting
effects
No statement for this group.
No statement for this group.
No GHS Classification available at the moment.
| Melting point: | |
|---|---|
| Boiling Point: | |
| Density (at 20 °C, if not notified otherwise): | 0,89 g/cm3 |
| Flash Point: | |
| Ignition Temperature: | |
| Vapour Pressure (at 20 °C, if not notified otherwise): | 5,6 hPa |
| Lower Explosive Limit: | 0,8 Vol.-% |
| Hazardous Effects: | Ss |
Details
| 1 | Flammability: Flammable when heated | |
| 2 | Instability: Strong chemical reactions | |
| 2 | Health: Dangerous | |
| DG-EA: | ||
Also known as:
- (5E)-5-ethylidenebicyclo[2.2.1]hept-2-ene
- 5-Ethylidenbicyclo(2, 2, 1) hep-2-en
- 5-ethylidene bicyclo(2.2.1)hept-2-ene ENB Ethylidene norbornene
- 5-Ethylidene-2-norbornene
- 5-ethylidene-8,9,10-trinorborn-2-ene
- 5-Ethylidenebicyclo(2.2.1)-hept-2-ene
- 5-ethylidenebicyclo[2.2.1]hept-2-ene
- ENB
- Ethylidene norbornene
- Ethylidennorbornen
- Ethylidennorbornene (ENB) Ethylidentrinorbornene (ENB)
Suitable products for Ethylidene norbornene C9H12
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Gas Detection Tubes
Dräger Short-term Tubes
- Short-term Tubes
- results are directly shown at the end of the measurement process
- spot measurement for more than 500 different gases
- short measurement time: between 5 seconds to 15 ...
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- display for clear readability of results
- can be used in explosive areas
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Filters
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger Panorama® Nova
- Single-filter full-face mask
- different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
- EPDM or silicone mask body, ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Powered Air Purifying Respirators and Filters
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
- Powered-Air Purifying Respirator
- Protection without breathing resistance
- Different breathing filters and head / face pieces available
- Protection class IP65
- For Ex zones 1, 2, 21 and 22
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
