Trinickel disulphide (as Ni)Ni3S2
CAS-No.: | 12035-72-2 |
|---|---|
EC-No.: | 234-829-6 |
Hazard signs
- H: 317
May cause an allergic skin reaction
- H: 341
Suspected of causing genetic defects.
- H: 350 i
May cause cancer by inhalation.
- H: 372
Causes damage to organs (state all organs affected, if known) through prolonged or repeated exposure (state route of exposure if it is conclusively
proven that no other routes of exposure cause the hazard)
- H: 410
Very toxic to aquatic life with long lasting effects
- P: 201
Obtain special instructions before use
- P: 273
Avoid release to the environment.
- P: 280
Wear protective gloves/protective clothing/eye protection/face protection.
- P: 302 + 352
IF ON SKIN: Wash with plenty of soap and water.
- P: 308 + 313
IF exposed or concerned: Get medical advice/attention.
No statement for this group.
No GHS Classification available at the moment.
Melting point:
787 °C Density (at 20 °C, if not notified otherwise):
5,87 g/cm3Hazardous Effects:
C, Ss, M
Also known as:
- Coarse discharge Conc 1 DER Intermediate nickel containing product Nickel subsulphide Reaction Mass containing Trinickel Disulphide Reduced sinter Stabilised Clydach Residue trinickel disulphide Trinickel Disulphide in Reaction Mass
- Heazlewoodit
- NICKEL SUBSULFIDE Nickel subsulfide Ni3S2 Nickel Subsulphide Nickel sulfide nickel; (sulfanylidene-λ4-sulfanylidene)nickel Nickelsulfid (Ni3S2) Trinickel disulfide Trinickel Disulphide
- Trinickeldisulfid
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for Trinickel disulphide (as Ni) Ni3S2
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Filters
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 2100
- Single-filter dust mask
- reusable single-filter dust mask
- mask body made from EPDM (universal size) or silicone (two sizes)
- to be used with Dräger replacement filters, available in the protection ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger Panorama® Nova
- Single-filter full-face mask
- different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
- EPDM or silicone mask body, ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 6570
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- silicone mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
