Catalytic Bead DrägerSensor® Sensors for Fixed Gas Detectors

Catalytic Bead DrägerSensor®

Contact us

Catalytic Bead DrägerSensor®

The DrägerSensor® ... DQ detects flammable gases and vapours such as hydrogen. Due to the double-detector compensation method, the catalytic sensor is particularly long-term stable. The wire mesh at the gas inlet serves as a flame barrier. So it ensures explosion protection at the same time short response time.

The catalytic bead principle

The DrägerSensors ... DQ are based on the catalytic bead detection principle. The most important component are the hot, catalytically active pearls on platinum coils (pellistors). These pellistors burn the gas and additional heat of reaction is created. The temperature increases depending on the gas concentration and thus also changes the electrical resistance of the platinum coils. This change is passed on as a measuring signal. There are five different catalytic bead sensors from Dräger, which are used in different transmitters and measuring heads.

DrägerSensor® PR M DQ

PR stands for poison resistant. The pellistors of the DrägerSensor PR M DQ have a longer service life under the influence of poisonous substances. The sensor has a metric thread (M) on the back.

DrägerSensor® PR NPT DQ

The DrägerSensor PR NPT DQ also withstands poisoning substances for a long time. This sensor is equipped with a NPT thread on the back.

DrägerSensor® HT M DQ

The DrägerSensor HT M DQ can be used at ambient temperatures of up to 155 ° C and is also approved accordingly (HT = high temperature). This sensor also has a metric thread.

DrägerSensor® LC M

​LC stands for >low concentration<. The DrägerSensor LC M detects very low gas concentrations in the measuring range from 0 to 10% LEL. This is possible by a special arrangement of the PR pellistors, as well as an amplifier electronics. The sensor has a metric thread.

DrägerSensor® LC NPT

​The LC NPT sensor also detects gas concentrations in the measuring range of 0 to 10% LEL. It is equipped with a NPT thread.

Downloads

Catalytic Bead DrägerSensor Product Information, en-master
Catalytic Bead DrägerSensor Product Information, en-master

The DrägerSensor® DQ detects flammable gases and vapours such as hydrogen. Due to the double-detector compensation method, the catalytic sensor is particularly long-term stable. The wire mesh at the gas inlet serves as a fl ame barrier. So it ensures explosion protection at the same time short response time.

Download

More than the sum Brochure, en
More than the sum Brochure, en

Dräger is a successful global player in the field of stationary gas measuring technology since more than 70 years. We have been developing gas measuring products, setting new standards for measuring accuracy, durability and customer-specific adaptation.

Download

FGDS Sensor Brochure, en
FGDS Sensor Brochure, en

When there’s danger in the air ... this can quickly pose a high risk to humans, the environment, and all types of property and systems. Recognize the threat before it is too late.

Download

Explosion Protection Brochure, en-master
Gas List Brochure, en
SIL Brochure, en
IFU DrägerSensor LC M / LC NPT 9023678 de-me
IFU SP Remote Calibration Adapter DQ LC 9033292 ME

Get in touch with Dräger

Contact Us Image Safety Products

Дрегер Сейфти България ЕООД

​бул.Джеймс Баучер 2
гр.София, п.к. 1164

+359 2963 4366

​Dräger tehnika d.o.o.

Radoja Dakića 7
110 10 Beograd

T: +381 11 3911 222

Draeger Hellas S.A.

​150, El. Venizelou Str.
142 31 Nea Ionia, Greece

+30 21 0282 1809

​Dräger Slovenija d.o.o.

Nadgoriška cesta 19
12 31 Ljubljana-Črnuče

T: +386 1 561 2263