Dräger PARAT® 4700
Exceptionally innovative and intuitive: When opening the packaging, the filter plug is automatically released from the filter. The filter is then deployed into operational position and the hood can be immediately donned. Thanks to the self-adjusting internal head harness, no additional adjustment is required. All you have to do is: open the packaging, remove and don the hood – and leave the danger zone.
The high-performance combination filter reliably protects against a wide range of toxic industrial gases, vapours and particles. The ABEK P3 filter is approved according to the DIN 58647-7 for filtering escape devices; additionally, the filter is tested in accordance with the EN 14387:2004 for gas and combined filter(s). The filter is tightly sealed with two filter plugs keeping it safe over its long lifetime.
Replacing the filter after 8 years will extend the service life of the PARAT Escape Hood to 16 years in total. For this, Dräger offers filter replacement service or an expert training for your employees.
Both ergonomics and wearing comfort were considered when designing the packaging of the PARAT Escape Hoods. The escape hood can be carried with a belt, shoulder strap, grip clip or belt clip. The PARAT Hard Case can also be mounted on the wall using a wallholder. Additionally, the robust packaging of the PARAT Escape Hoods protects the device from damage.
You can select between two packaging types: The Hard Case provides splash water protection (IP54) – the Soft Pack provides dust protection (IP5). Both packaging types have a viewing window to check the filter expiration date and the condition of the device. Particularly convenient: The security seal on the packaging shows if the unit has been opened.
Product Information: Dräger PARAT® 4700
The Dräger PARAT® 4700 industrial escape hood was developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust housing and a tested ABEK P3 filter ensure protection from toxic industrial gases, vapours and particles for at least 15 minutes.
Donning Poster Dräger PARAT® Hard Case, en
Donning procedure of the Dräger PARAT® hard case version
Donning Poster Dräger PARAT® Soft Pack, en
Donning procedure of the Dräger PARAT® soft pack version
- Product type
- Industrial escape hood
- Protection against
- Industrial gases, vapours and particles
- Filter type
- ABEK P3
- Escape time
- min. 15 minutes
- 16 years (filter exchange required after 8 years)
- Packaging options
- Soft Pack (dust protection IP5); Hard Case (splash water protection IP54)
- 0.74 Kg
- Eye protection
- Filter expiry date
- Training unit
- Wall mounting
- ✓ (Hard Case only)
- Hip strap
- Shoulder strap
- Belt clip
- Grip clip
- Carrying case
- Slip guard carabiner
- Hand strap
- EN 403:2004
- DIN 58647-7
- EN 14387:2004 (only filter)
- EN 137:2006 Typ 2
- NIOSH 42 CFR Part 84