Allyl bromideC3H5Br
Details
| CAS-No.: | 106-95-6 |
|---|---|
| UN-No.: | 1099 |
| EC-No.: | 203-446-6 |
| Hazard identification number: | 336 |
Warning sign
- 336
- 1099
Hazard signs
- H: 225
Highly flammable liquid and vapour - H: 301
Toxic if swallowed - H: 314
Causes severe skin burns
and eye damage. - H: 331
Toxic if inhaled - H: 340
May cause genetic defects (state route of exposure if it is conclusively proven that no other routes of exposure cause
the hazard) - H: 350
May cause cancer. - H: 400
Very toxic to aquatic life
- P: 210
Keep away from heat/
sparks/open flames/hot
surfaces. — No smoking. - P: 301 + 312 + 330
Wear protective gloves/protective
clothing/eye protection/
face protection. - P: 301 + 330 + 331
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting - P: 303 + 361 + 353
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. - P: 310
Immediately call a POISON CENTER/ doctor/...
No statement for this group.
No GHS Classification available at the moment.
| Melting point: | |
|---|---|
| Boiling Point: | |
| Density (at 20 °C, if not notified otherwise): | 1,4 g/cm3 |
| Ionization: | 9.96 eV |
| Flash Point: | |
| Ignition Temperature: | |
| Vapour Pressure (at 20 °C, if not notified otherwise): | 150 hPa |
| Lower Explosive Limit: | 4,3 Vol.-% |
| Upper Explosive Limit: | 7,3 Vol.-% |
Details
| 3 | Flammability: Flammable with normal temperature | |
| 1 | Instability: Instable when heated | |
| 3 | Health: Very dangerous | |
| DG-EA: | 2WE | |
Also known as:
- 3-bromoprop-1-ene
- 3-bromopropene
Suitable products for Allyl bromide C3H5Br
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Gas Detection Tubes
Dräger Short-term Tubes
- Short-term Tubes
- results are directly shown at the end of the measurement process
- spot measurement for more than 500 different gases
- short measurement time: between 5 seconds to 15 ...
Dräger X-act® 5000 Basic
- Automatic tube pump
- ideal for a high number of strokes
- display for clear readability of results
- can be used in explosive areas
Dräger accuro
- Manual tube pump
- for spot measurements with a limited number of strokes
- integrated stroke counter for safe control
- easy to operate with one hand
- can be used in explosive areas
Filters
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger Panorama® Nova
- Single-filter full-face mask
- different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
- EPDM or silicone mask body, ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Powered Air Purifying Respirators and Filters
Dräger X-plore® 8000 Filters
- Filters for PAPR
- Particle, gas and combination filters available
- To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
- Optional pre- and odour filter
Dräger X-plore® 8000
- Powered-Air Purifying Respirator
- Protection without breathing resistance
- Different breathing filters and head / face pieces available
- Protection class IP65
- For Ex zones 1, 2, 21 and 22
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
