Silicon tetrafluorideSiF4
CAS-No.: | 7783-61-1 |
|---|---|
UN-No.: | 1859 |
EC-No.: | 232-015-5 |
Hazard identification number: | 268 |
Warning sign: |
|
Hazard signs
- H: 280
Contains gas under pressure; may explode if heated
- H: 314
Causes severe skin burns
and eye damage.
- H: 330
Fatal if inhaled
- P: 260
Do not breathe dust/fume/gas/mist/vapours/spray
- P: 301 + 312 + 330
Wear protective gloves/protective
clothing/eye protection/
face protection.
- P: 303 + 361+ 353 + 315
- P: 304 + 340 + 315
- P: 305 + 351 + 338 + 315
- P: 403
Store in a well-ventilated place.
- P: 405
Store locked up.
- EUH: 071
Corrosive to the respiratory tract
No GHS Classification available at the moment.
Melting point:
-86.8 °C Density (at 20 °C, if not notified otherwise):
0,004681 (0°C) g/cm3Ionization:
15.24 ± 0.14 eV
Details
| 0 | Flammability: No explosion danger | |
| 2 | Instability: Strong chemical reactions | |
| W | Special: Do not use water to extinguish (water-reactant) | |
| 3 | Health: Very dangerous | |
| DG-EA: | 2PE | |
Also known as:
- Perfluorsilan
- silicon(4+) tetrafluoride
- Siliconfluorid
- Silicontetrafluorid
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Suitable products for Silicon tetrafluoride SiF4
Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.
Fixed Gas Detectors and Sensors
Dräger Polytron® 7000
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Intrinsic Safety
- Interface: 4-20 mA, Bus, HART ®
- IP class: 66/67 and SIL2
- Special: Display
Dräger Polytron® 3000
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: with Intrinsic Safety
- Interface: 4-20 mA
- IP class: IP66 and SIL1
- Special: -
Dräger Polytron® 5100 EC
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: with Increased Safety or flameproof
- Interface: 4-20 mA, Relays
- IP class: IP 65/66/67
- Special: displays
Dräger Polytron® 6100 EC WL
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Intrinsic Safety
- Interface: Wireless
- IP class: 66/67 and SIL2
- Special: Wireless
Dräger Polytron® 8100 EC
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Increased Safety or flameproof
- Interface: 4-20 mA, Relays, Bus, HART ®
- IP class: IP65/66/67 and SIL2
- Special: ...
Dräger PointGard 2100
- Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: Non-explosion proof
- Interface: 4-20 mA, Relays
- IP class: IP 66
- Special: Self-contained gas monitor
Electrochemical DrägerSensor®
- Electrochemical Gas Detector
- continuous monitoring of poisonous gases and oxygen
- compatible with: Polytron 8100, Polytron 7000, Polytron 6100, Polytron 5100, Polytron 3000, PointGard ...
Filters
Dräger X-plore® Rd90 Filters
- Respirator filter Rd90
- Dräger specific Rd90 connection
- robust aluminium housing
- to be used in combination with X-plore 4700 half masks
Dräger X-plore® Rd40
- Respirator filter Rd40
- standard thread connection Rd40 according to EN 148-1
- robust aluminium housing
- to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Dräger X-plore® Bayonet
- Respirator filter Bayonet
- Dräger specific Bayonet connection
- lateral position of the filters for an unrestricted field of vision and even weight distribution
- to be used with X-plore 3300 or X-plore 3500 ...
Masks
Dräger X-plore® 3300/3500
- Twin-filter half-face mask
- Dräger specific bayonet connection (twin-filter system)
- mask body made from Soft-TPE or DrägerFlex material (silicon free)
- to be used with X-plore Bayonet ...
Dräger X-plore® 4700
- Single-filter half-face mask
- standard thread connection Rd40 according to EN 148-1
- mask body made from TPE (universal size) or silicone (two sizes)
- to be used with all filters with standard thread ...
Dräger Panorama® Nova
- Single-filter full-face mask
- different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
- EPDM or silicone mask body, ...
Dräger X-plore® 6530
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of triplex or PC
- to be used with all filters with standard thread connection ...
Dräger X-plore® 6300
- Single-filter full-face mask
- standard thread connection Rd40 according to EN 148-1
- EPDM mask body, visor made of PMMA
- to be used with all filters with standard thread connection Rd40
Dräger X-plore® 5500
- Twinfilter full-face mask
- Dräger specific bayonet connection – lateral position of the filters
- EPDM mask body, visor made of triplex or PC
- to be used in combination with X-plore Bayonet ...
Get in touch with Dräger
If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.
Discover more: Dräger VOICE - The hazmat-based safety product finder
You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!
