UndecaneC11H24

CAS-No.:
1120-21-4
UN-No.:
2330
EC-No.:
214-300-6
Hazard identification number:
30
Hazard signs
GHS08

*Source: GESTIS Substance Database, https://gestis-database.dguv.de

  • H: 304
    May be fatal if swallowed and enters airways

*Source: GESTIS Substance Database, https://gestis-database.dguv.de

  • Melting point:
    -26 °C
  • Boiling Point:
    196 °C
  • Density (at 20 °C, if not notified otherwise):
    0,74 g/cm3
  • Ionization:
    9,56 eV
  • Flash Point:
    61 °C
  • Ignition Temperature:
    195 °C
  • Vapour Pressure (at 20 °C, if not notified otherwise):
    0,549 (25°C) hPa
  • Lower Explosive Limit:
    0.6 Vol.-%
  • Upper Explosive Limit:
    6.5 Vol.-%
  •  

*Source: GESTIS Substance Database, https://gestis-database.dguv.de

Also known as:
  • Undecane

Get in touch with Dräger

If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.

Suitable products for Undecane C11H24

Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.

Gas Detection Tubes

Dräger Short-term Tubes

Dräger Short-term Tubes

  • ​results are directly shown at the end of the measurement process
  • spot measurement for more than 500 different gases 
  • short measurement time: between 5 seconds to 15 ...

More details
Dräger accuro

Dräger accuro

  • for spot measurements with a limited number of strokes
  • integrated stroke counter for safe control
  • easy to operate with one hand
  • can be used in explosive ...

More details

Masks and Filters

Dräger X-plore® Rd40

Dräger X-plore® Rd40

  • ​standard thread connection Rd40 according to EN 148-1
  • robust aluminium housing
  • to be used with half and full face masks with standard thread connection Rd40 according to EN ...

More details
Dräger X-plore® Bayonet

Dräger X-plore® Bayonet

  • Dräger specific Bayonet connection
  • lateral position of the filters for an unrestricted field of vision and even weight distribution
  • to be used with X-plore 3300 or X-plore 3500 half ...

More details
Dräger X-plore® 4700

Dräger X-plore® 4700

  • ​standard thread connection Rd40 according to EN 148-1
  • mask body made from TPE (universal size) or silicone (two sizes)
  • to be used with all filters with standard thread connection ...

More details
Dräger Panorama® Nova

Dräger Panorama® Nova

  • ​different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
  • EPDM or silicone mask body, visor made of triplex or ...

More details
Dräger X-plore® 6530

Dräger X-plore® 6530

  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of triplex or PC
  • to be used with all filters with standard thread connection Rd40

More details
Dräger X-plore® 6300

Dräger X-plore® 6300

  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of PMMA
  • to be used with all filters with standard thread connection Rd40

More details
Dräger X-plore® 5500

Dräger X-plore® 5500

  • ​Dräger specific bayonet connection – lateral position of the filters 
  • EPDM mask body, visor made of triplex or PC
  • to be used in combination with X-plore Bayonet ...

More details
Dräger X-plore® 3300/3500

Dräger X-plore® 3300/3500

  • ​Dräger specific bayonet connection (twin-filter system)
  • mask body made from Soft-TPE or DrägerFlex material (silicon free)
  • to be used with X-plore Bayonet filters

More details

Filtering Escape Devices

Dräger PARAT® 1200

Dräger PARAT® 1200

- Small escape filter device for 10-minute protection against toxic industrial gases and vapours

- Suitable for spectacle and beard wearers

- Robust housing with seal for extra ...

More details
Dräger PARAT® 3100

Dräger PARAT® 3100

- Half mask escape device equipped with ABEK15 filter for 15 min. protection against toxic industrial gases according to DIN 58647-7

- Easy donning

- Various carrying options

- Up to ...

More details
Dräger PARAT® 3200

Dräger PARAT® 3200

- Mouthpiece / nose clip escape device with ABEK15 filter for 15 min. protection against toxic industrial gases according to DIN 58647-7

- Various carrying options

- Up to 12 year service ...

More details
Dräger PARAT® Filtering Escape Hoods

Dräger PARAT® Filtering Escape Hoods

- Escape hood in three versions: Industrial or fire escape hood, or both versions in one 

- Simple application in 3 steps

- Approved to EN 403:2004 for fire escape hoods and/or DIN ...

More details

Powered Air Purifying Respirators and Filters

Dräger X-plore® 8000

Dräger X-plore® 8000

  • Protection without breathing resistance
  • Different breathing filters and head / face pieces available
  • Protection class IP65
  • For Ex zones 1, 2, 21 and 22

More details
Dräger X-plore® 8000 Filters

Dräger X-plore® 8000 Filters

  • Particle, gas and combination filters available
  • To be used with powered air purifying respirator X-plore® 8500 or 8700 (EX)
  • Optional pre- and odour filter

More details

Get in touch with Dräger

If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.

Discover more: Dräger VOICE - The hazmat-based safety product finder

You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!

VOICE Hazmat