Dräger HPS® 4500

This optional LED rear light serves as a warning and indicator light. It is adapted to the back side of the helmet using an adapter with a bayonet-type connector and runs on two commercially available coin cell batteries. The lamp has seven modes in three colours (blue, white and red) that are either continuously on/off or flashing.

• Robust, easy-to-install communication unit for firefighting helmets
• Excellent audio performance with different base units and microphone options
• Specially developed for use in extreme conditions

Light fabric bag to protect and carry a helmet.

The HPS-COM adapter allows the connection of the helmet communication unit Dräger HPS-COM to the firefighter helmets of the Dräger HPS 4500 series. This adapter can be installed very easily and without tools in just a few steps. The Nexus plug at the end of the cable of the helmet communication unit can be plugged into a holder on the adapter when not in use. Thereby it is always at hand and at the same time protected from dirt and mechanical damage.

Neck protector with plug-and-click system, can be mounted quickly, securely and without tools. Optionally available in the following versions:

• Leather version
• Short tight fitting aramid version
• Aluminised aramid version
• Scarf type version

Magnetic adapter solution for easy, intuitive and very secure connection of standard helmet lamps on the right and/or left side of the helmet – even during use without taking off the helmet – one "click" and the lamp is attached to the helmet. The light angle can be easily adjusted as well. The three-part system consists of a universal lamp holder, a PARASNAP^® plug-in adapter and a PARASNAP^® lamp holder.

Approved in accordance with EN 14458 and in combination with HPS^® 4500 for technical rescues in accordance with EN 443:2008.

Approved in accordance with EN 14458 and in combination with HPS^® 4500 approved in accordance with EN 443:2008. High temperature resistant and therefore suitable for inner attacks.

Length adjustable elastic strap, with double lens acetate / polycarbonate premium anti-fog and anti-scratch coating. Including clips for secure fixation of the goggles to the helmet shell. Approvals: EN 166; ANSI Z87.1; AUS/NZ 1337; CSA Z94.3

Plug-in adapter for small round shaped lamps (e.g. PX 2) and for large oval shaped lamps (e.g. PX 1). The swivel joint allows swiveling of the helmet lamp in almost any direction.

Helmet-mounted base part for connecting the plug-in adapters of the Parasnap^® magnetic lamp holder solution or the lamp holders for large or small lamps of the standard plug-in solution.