Dräger PIR 3000
Contact usDräger PIR 3000
Flammable Gas Detectors
- Sensor: IR Sensor
- Installation: Increased Safety or flameproof
- Interface: 4-20 mA
- IP class: IP 65/66/67
- Special: -
Failsafe infrared technology and low cost of ownership
The superior performance characteristics of infrared technology (such as poison immune and "fail-safe" operation) have been known and valued in gas detection for many years. The PIR 3000 now offers these performance benefits more affordably, combined with low maintenance costs and a long life time of more than 15 years, cost of ownership is significantly reduced.
Smart and flexible
The PIR 3000 offers a gas library with three gas categories: methane, propane and ethylene. Therefore, nearly all hydrocarbons are detectable. In addition, temperature-compensated linearisation curves allow for signal output for individual substances. Through optional accessories – e.g. the process adapter or the duct mount set – a multitude of measuring tasks can be performed professionally.
Suitable for the harshest conditions
Based on its exceptional product quality, the PIR 3000 offers high reliability and excellent measuring performance, in relation to long-term stability. With GRP junction box and 316 stainless steel enclosure, a temperature range of - 40 to + 65 °C (- 40 to + 149 °F) and heated measurement optics driving off compensation from the lens, the PIR 3000 is suitable for all the worlds climate zones.
Performance features
- Temperature-compensated and non-imaging optics
- Gas library with 3 gas categories: Methane, propane and ethylene (typical of most hydrocarbons), performance approved in accordance with IEC 60079
- Performance approval (in accordance with IEC 60079) for 13 further substances
- Dirt and dust protection through hydrophobic splash guard
- Analog 4 to 20 mA output signal (universal)
- Specified temperature range from - 40 °C to + 65 °C / - 40 °F to + 149 °F
- Unrestricted usage in humid atmospheres
- Hermetically sealed 316 stainless steel enclosure
- Slim enclosure design for confined areas of use
- Long maintenance interval thanks to minimum long-term drift
- No moving parts
- Typical life time: 15 years
- Ex approvals for worldwide use: ATEX, IECEx, UL, CSA
- Dust ex approval for zone 21 and 22
- Ingress Protection: IP 65, IP 66 and IP 67
360 Product View
Images and Videos
Downloads
Product Information: Dräger PIR 3000 (PDF)
The Dräger PIR 3000 is an explosion proof infrared gas detector for continuous monitoring of combustible gases and vapors.
SIL Brochure, en
Safety Instrumented Systems are used to reduce the risk for the protection of people, plants, and environment.
IFU PIR 3000 9023974 en
These instructions for use are provided for informational purposes only. Please always read and comply with the instructions for use delivered with the product.
Technical Data
Key Facts
- Type
- Transmitter
- Response time
- <= 30 seconds
- Cable entry
- M25 or 3/4" NPT
- Display
- ✗
- Intrinsic Safety
- ✗
- Flameproof
- ✓
- Increased Safety
- ✓
- SIL
- ✓ SIL 2 (IEC 61508-2)
- 4-20 mA
- ✓
- Bus
- ✗
- HART®
- ✗
- Wireless
- ✗
Technical Data
- Power Supply
- 10 to 30 VDC
- Temperature (operation)
- -40°C - 65°C
- Humidity
- 0 to 100% r.h.
- Pressure
- 700 - 1300
- Dimensions (H × W × D)
- 0.17x0.04x0.04 m
- Weight
- 1.21 lb
- Housing Material
- Stainless steel SS 316
- Degree of protection (IP class)
- IP65/66/67
Approvals
- ATEX
- ✓
- IECEx
- ✓
- UL
- ✓
- CSA
- ✓
- CE marking
- ✓
- GOST (EAC)
- ✓
- Performance approval
- ✗
- Shipping approval
- ✓
- FM
- ✗
Related Products and Associated Offerings
Dräger Flame 5000
The Dräger Flame 5000 is an imaging based explosion proof flame detector. This visual flame detection system uses digital image processing and advanced algorithms to process and interpret flame characteristics. This ...
Dräger PEX 3000
The transmitter Dräger PEX 3000 detects flammable gases and vapours in concentrations below their lower explosive limit (100 %LEL). It increases the explosion protection of your plant. Its catalytic bead sensor ...
Dräger PIR 7000
The Dräger PIR 7000 is an explosion proof point infrared gas detector for continuous monitoring of flammable gases and vapours. With its stainless steel SS 316L enclosure and drift-free optics this detector is built for ...
Dräger Polytron® 5310 IR
The Dräger Polytron® 5310 IR is a cost effective explosion-proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses an infrared DrägerSensor® IR that can be ...
Dräger Polytron® 5700 IR
The Dräger Polytron® 5700 IR is a cost effective explosion-proof transmitter for the detection of flammable gases in the lower explosive limit (LEL). It uses a high performance infrared Dräger PIR 7000 sensor that will ...
Dräger Polytron® 7000
The Dräger Polytron® 7000 is a gas detector that can satisfy all toxic and oxygen gas measurement applications on a single platform. It is meeting the requirements of the compliance market as well as the high ...
Dräger Polytron® 8310 IR
The Dräger Polytron® 8310 IR is an advanced explosion proof transmitter for the detection of combustible gases in the lower explosion limit (LEL). It uses an infrared DrägerSensor® IR that can be ...
DrägerSensor® IR
Upgrade from Catalytic bead to infrared technology with ease using the DrägerSensor IR. The Sensor IR can replace catalytic ex-sensors (pellistors) from the majority of manufacturers without replacing controllers, ...
Splash guard
Guards the measuring cuvette against dirt and dust, water-repellent, fitted as standard.
Order No.: 68 10 796
Process adapter
Sampling or process applications with gas inlet and outlet.
Order No.: 68 11 330
Calibration adapter
Transmitter calibration (with mounted splash guard), up to wind force 10 Bft, fitted as standard.
Order No.: 68 10 859
Weather Guard
Double-walled enclosure to prevent dirt deposits, e.g. salt crust. Improves resistance to extreme weather conditions.
Order No.: 68 11 135
Duct Mount Kit
Enables mounting of the transmitter directly in to pipes and ducts, includes maintenance position for simple calibration.
Order No.: 68 10 995
Dräger REGARD® 3900 Series
The devices of the Dräger REGARD® 3900 series can be used as standalone controllers. You can configure up to 16 measuring channels. In addition, the modular setup enables you to customise the control units to the ...
