Dräger PointGard 2100

​The Dräger PointGard 2100 series is a self-contained gas detection system for the continuous area monitoring of toxic gases in ambient air. PointGard 2100’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.

Toxic Gases and Oxygen Detector

  • Sensor: Electrochemical Sensor
  • Installation: Non-explosion proof
  • Interface: 4-20 mA, Relays
  • IP class: IP 54
  • Special: Self-contained gas monitor

Ready to use out of the box

PointGard is a self-contained gas detection alarm system that is easy to install and commission. Just mount it on a wall and hard wire it to an AC/DC power or plug in the optional AC power cord. Since the strobes and horn are built in, there is no need to specify and purchase separate alarm output devices. The pre-calibrated sensor is ready to use.

Detect over 100 toxic gases using DrägerSensors

​Electrochemical DrägerSensors provide continuous detection even under the harshest conditions. Most DrägerSensors offer a very wide temperature range from -40 °C to +65 °C (-40 °F to +149 °F). The built-in memory contains all the information relating to calibration and configuration. The sensor is pre-calibrated and ready for immediate operation. An intelligent sensor self-test function allows for predictive maintenance.

Flexible communications

​PointGard can accommodate additional external alarm devices through its three built-in relays. In addition, a 4–20 mA signal output allows integration into a larger gas detection system.

Rugged and compact housing

​PointGard’s glass fiber reinforced polyester housing is water and dust resistant with a 4X/IP66 rating. Its compact size allows it easily to fit most applications. Built-in cable glands make it easy to install.

Advanced display with diagnostics

​The large, illuminated backlit graphic display shows status information clearly and in a format that's easy to use. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Coloured LEDs (green, yellow, and red) provide additional alarm and status information. Advanced diagnostics log events and gas readings, which can be displayed and a graph created on the display.

Monitor remote areas up to 30 meters away

​A remote sensor enclosure with a cable up to 30 metres long, designed for use in ordinary locations, is available for electrochemical sensors.

Downloads

Product Information: Dräger PointGard 2100 (PDF)
Product Information: Dräger PointGard 2100 (PDF)

The Dräger PointGard 2100 series is a self-contained gas detection system for the continuous area monitoring of toxic gases in ambient air. PointGard 2100’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.

Download

IFU PointGard 2000 Series 9033866 en, en-us me
IFU PointGard 2000 Series 9033866 en, en-us me

These instructions for use are provided for informational purposes only. Please always read and comply with the instructions for use delivered with the product.

Download

Technical Data

Key Facts

Type
Stand-alone
Cable entry
M20
Display
Intrinsic Safety
Flameproof
Increased Safety
SIL
4-20 mA
Bus
HART®
Wireless

Technical Data

Power Supply
100 - 240 V AC 50 - 60 Hz or 8 - 30 V DC
Temperature (operation)
-20°C - 50°C
Humidity
0 to 95% r.h., non-condensing
Pressure (hPa)
700 - 1300
Dimensions (H × W × D)
0.26x0.28x0.12 m
Weight
12.13 lb
Housing Material
Glass fibre reinforced polyester (GFRP)
Degree of protection (IP class)
IP66 (pending)

Approvals

ATEX
IECEx
UL
CSA
CE marking
GOST (EAC)
Performance approval
Shipping approval (MED)

Compare with related ProductsShare

Get in touch with Dräger

Contact Us Image Draeger Safety Products

Draeger Safety UK Ltd.

Ullswater Close, Blyth Riverside Business Park
Blyth, Northumberland, NE24 4RG

+44 (0) 1670 352 891

Call us from Mon - Thurs 8:30am - 5pm
Fri 8:30am - 2pm

Draeger Marine and Offshore

Unit 2 Tern Pl, Bridge of Don
Aberdeen, AB23 8JX
+44 (0) 1224 701 569