Dräger Polytron® 3000
Toxic Gases and Oxygen Detector
- Sensor: Electrochemical Sensor
- Installation: with Intrinsic Safety
- Interface: 4-20 mA
- IP class: IP66 and SIL1
- Special: -
Simple, quick installation
The Polytron 3000 consists of two components, the dockingstation, for mechanical and electrical installation, and the Polytron 3000 transmitter. The dockingstation can be mounted and wired in advance, guarded against rain and dust by a modular cover until time of commissioning. During commissioning, the Polytron 3000 is simply inserted into the dockingstation and secured with a quick lock mechanism. After inserting the sensor, the system is ready for operation.
Wide range of applications
With its exceptional electromagnetic compatibility and a variety of mounting options, the CE marked Polytron 3000 is suitable for many different areas of application ranging from chemical to the semiconductor industries.
Easy to operate and maintain
The operation and maintenance of the Polytron 3000 is easy. The tried and tested DrägerSensor is equipped with an integrated data memory that contains all calibration information. This allows the Polytron 3000 to accept a pre-calibrated sensor, speeding up maintenance or sensor change. If preferred, the sensor can be field calibrated in the transmitter.
For global use the Polytron 3000 is approved according to ATEX, IECEx, UL and CSA.
Images and Videos
Product information: Dräger Polytron® 3000 (PDF)
The Dräger Polytron® 3000 is an intrinsically safe gas detector for the continuous monitoring of more than 60 toxic gases and oxygen in ambient air. It is the part of a new generation of gas detectors developed on a modular platform. Communication to the central control system is done via a 4 to 20 mA signal.
Explosion Protection Brochure, en-master
Detecting flammable gases and vapours before they become a hazard takes priority over mechanical and electrical explosion-protection measures.
Gas List Brochure, en
List of detectable gases and vapours.
Sensors and substances
Dräger Sensors for fixed gas detectors can be used to measure a large number of hazardous substances. Check the different sensors by searching for a substance. Get in contact with our experts to get more information.
Utilise for 46 Substances
15 matching SensorFGDS
- Cable entry
- Intrinsic Safety
- Increased Safety
- ✓ SIL 1 (IEC 61508-2)
- 4-20 mA
- Power Supply
- 12 to 30 V DC, 2-wire
- Temperature (operation)
- -40°C - 65°C
- 0 to 100% r.h., non-condensing
- Pressure (hPa)
- 700 - 1300
- Dimensions (H × W × D)
- 0.17x0.14x0.13 m
- 1.98 lb
- Housing Material
- Glass fibre reinforced polyester (GFRP)
- Degree of protection (IP class)
- CE marking
- GOST (EAC)
- Performance approval
- Shipping approval (MED)