Dräger Polytron® 8200 CAT

The Dräger Polytron® 8200 CAT is an advanced explosion-proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses a catalytic bead DrägerSensor® Ex that will detect most flammable gases and vapours. In addition to a 3-wire 4 to 20-mA analogue output with relays it also offers HART®, Modbus and Fieldbus protocols, making it compatible with most control systems.

Flammable Gas Detectors

  • ​Sensor: Catalytic bead sensor
  • Installation: Increased Safety or flameproof
  • Interface: 4-20 mA, Relays, Bus, HART ®
  • IP class: IP65/66/67 and SIL2
  • Special: Display

Fast and stable – the DrägerSensor® Ex

The built-in DrägerSensor® Ex is based on the proven catalytic bead measuring principle. It has excellent long-term stability with outstanding poison resistance. And this is the reason for its durability. Due to the novel gas inlet opening, the sensor responds to gas in only a few seconds. This allows you to react immediately with countermeasures and prevent the development of a flammable atmosphere.

Easy device management via digital communication

The Dräger Polytron 8200 is equipped with digital interfaces allowing for quick and easy remote interrogation of the transmitter’s state. Integration with existing asset management systems such as PACTware is possible via DTM. In addition to the common HART® communication system, the fieldbus interfaces PROFIBUS® PA, FOUNDATION fieldbus H1, and Modbus RTU are also available.

Same design, same operating principle

The Dräger Polytron 8200 belongs to the Polytron 8000 series. All transmitters in this series have the same design and user interface. This allows for uniform operation with reduced training and maintenance requirements. The large graphic backlit display shows status information clearly and in an easy to use format. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Colored LEDs (green, yellow and red) provide additional alarm and status information.

The Polytron 8200 is operated by means of a magnetic wand over contact surfaces.

Three relays for controlling external equipment

Upon request, the Dräger Polytron 8200 can also be supplied with three integrated relays. This enables you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm. Audible alarms, signal lights or similar devices can thus be controlled locally without an additional cable between the transmitter and central controller.

Safe, robust housing for every application

Polytron 8200 features a Class I, Div. 1 rated explosion proof enclosure made from aluminium or stainless steel, making it suitable for a wide range of environmental conditions. A protection type “e” version includes a convenient docking station which allows installation in hazardous atmospheres without running conduit (where approved) and this also facilitates pre-assembly.

Make the impossible possible with the remote sensor

The remote sensor connection housing allows you to install the sensor separately from the transmitter. This allows you to simply place the sensor closer to the gas cloud in hard-to-reach locations. The display remains visible at eye level. Since the sensor is connected via an intrinsically safe connection, no conduit cabling is required. The connection also allows 'hot replacement' of the sensor in the hazardous area.

Data logger

The Polytron 8200 has a data logger, which records measuring and event data from prior years.

Downloads

Polytron 8200 CAT Product Information, en
Polytron 8200 CAT Product Information, en

The Dräger Polytron® 8200 CAT is an advanced explosion-proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses a catalytic bead DrägerSensor® Ex that will detect most flammable gases and vapours. In addition to a 3-wire 4 to 20-mA analogue output with relays it also offers HART®, Modbus and Fieldbus protocols, making it compatible with most control systems.

Download

More than the sum Brochure, en
More than the sum Brochure, en

Dräger is a successful global player in the field of stationary gas measuring technology since more than 70 years. We have been developing gas measuring products, setting new standards for measuring accuracy, durability and customer-specific adaptation.

Download

Explosion Protection Brochure, en-master
Explosion Protection Brochure, en-master

Detecting flammable gases and vapours before they become a hazard takes priority over mechanical and electrical explosion-protection measures.

Download

Brochure: Digital Communication (PDF)
Gas List Brochure, en
SIL Brochure, en
Dräger Polytron 8000 comDTM Modbus Version 2.5.0
Dräger Polytron 8xxx DD FF AMS V4.0
Dräger Polytron 8xxx DD FF Field Connector V4.0
Dräger Polytron 8xxx DD HART® AMS 1.x R400.2.
Dräger Polytron 8xxx DD HART® AMS FW1.x
Dräger Polytron 8xxx DD HART® AMS FW2.0.x
Dräger Polytron 8xxx DD HART® Field Connector 475 FW1.x
Dräger Polytron 8xxx DD HART® Field Connector 475 FW2.0.x
Dräger Polytron 8xxx DD HART® PDM V2.0
Dräger Polytron 8xxx DD PB PDM V4.0
Dräger Polytron 8xxx DTM FF Setup V1.0.0.1054
Dräger Polytron 8xxx DTM HART® Setup V2.2.0.722
Dräger Polytron 8xxx DTM MB Setup V1.0.652.0
Dräger Polytron 8xxx DTM PB Setup V1.0.0.1054
IFU Polytron 8xx0 - Safety Manual 9033307 en
PolySoft 1.11.0 Setup
Technical Manual Digital communication Modbus RTU me
Technical Manual Fieldbus communication FF me
Technical Manual Fieldbus communication PROFIBUS PA me
Technical Manual Polytron 8000 (Ex d)
Technical Manual Polytron 8000 (Ex e)

Technical Data

Key Facts

Type
Transmitter
Response time
Cable entry
M20 or 3/4" NPT
Display
Intrinsic Safety
Flameproof
Increased Safety
SIL
✓ (SIL 2)
4-20 mA
Bus
HART®
Wireless

Technical Data

Power Supply
10 to 30 V, 3-wire
Temperature (operation)
-40°C - 80°C
Humidity
0 to 100 % r.h., non-condensing
Pressure (hPa)
700 - 1300
Dimensions (H × W × D)
0.28x0.15x0.13 m
Weight
8.82 lb
Housing Material
Epoxy coated copper-free aluminum or stainless steel SS 316L
Degree of protection (IP class)
IP65/66/67

Approvals

ATEX
IECEx
UL
CSA
CE marking
GOST (EAC)
Performance approval
Shipping approval
FM

Compare with related ProductsShare

Get in touch with Dräger

Contact Us Image Draeger Safety Products

Draeger Safety UK Ltd.

Ullswater Close, Blyth Riverside Business Park
Blyth, Northumberland, NE24 4RG

+44 (0) 1670 352 891

Call us from Mon - Thurs 8:30am - 5pm
Fri 8:30am - 2pm

Draeger Marine and Offshore

Unit 2 Tern Pl, Bridge of Don
Aberdeen, AB23 8JX
+44 (0) 1224 701 569