The Dräger Polytron 8700 IR is an advanced explosion proof transmitter for the detection of combustible gases in the lower explosion limit (LEL). It uses a high performance infrared Dräger PIR 7000 sensor, which will quickly detect most common hydrocarbon gases. Besides a 3 wire 4 to 20 mA analogue output with relays, it also offers HART®, Modbus and Fieldbus making it compatible with most control systems.
Efficient, stable and robust – the Dräger PIR 7000
The Dräger PIR 7000 is efficient, stable and robust. With its stainless steel 316L enclosure and drift-free optics, the Dräger PIR 7000 is built to withstand the harshest industrial environments, offshore installations for example. The unique double … More informationcompensated 4 beam measuring system makes the sensor resistant to dust or dirt deposits on the optical surfaces, environmental or ageing effects and long term drift. In combination with the Polytron 8700 it offers a gas library with up to 100 gases providing a high degree of application flexibility. Each of the listed gases can be picked from a menu and automatically cross-calibrated with a standard calibration gas such as methane or propane. No need to consult the factory when applications change.
Same design, same operating principle
The Dräger Polytron 8700 belongs to the Polytron 8000 series. All transmitters in this series have the same design and user interface. This allows for uniform operation with reduced training and maintenance requirements. The large graphic backlit dis … More informationplay shows status information clearly and in an easy to use format. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Colored LEDs (green, yellow and red) provide additional alarm and status information. The Polytron 8700 is operated by means of a magnetic wand over contact surfaces.
Easy device management via digital communication
The Dräger Polytron 8700 is equipped with digital interfaces allowing for quick and easy remote interrogation of the transmitter’s state. Integration with existing asset management systems such as PactWare is possible via DTM. In addition to the comm … More informationon HART® communication system, the fieldbus interfaces PROFIBUS PA and Modbus RTU are also available.
Three relays for controlling external equipment
Upon request, the Dräger Polytron 8700 can also be supplied with three integrated relays. This enables you to use it as an independent gas detection system with two arbitrarily adjustable concentration alarms and one fault alarm. Audible alarms, sign … More informational lights or similar devices can thus be controlled locally without an additional cable between the transmitter and central controller.
Safe, robust housing for every application
Polytron 8700 features a Class I, Div. 1 rated explosion proof enclosure made from aluminium or stainless steel, making it suitable for a wide range of environmental conditions. A protection type “e” version includes a convenient docking station whic … More informationh allows installation in hazardous atmospheres without running conduit (where approved) and this also facilitates pre-assembly.
Make the impossible possible with the remote sensor
The remote sensor connection housing allows you to install the sensor separately from the transmitter. This allows you to simply place the sensor closer to the gas cloud in hard-to-reach locations. The display remains visible at eye level. A special … More informationcalibration flow cell accessory enables one person to perform a full calibration of a remote mounted sensor from the transmitter.
Data logger
The Polytron 8700 has a data logger, which records measuring and event data from the past years.
Service - Repair & Maintenance
You trust our products for the safety of your employees and the continuity of your processes. Products work at their best when they are correctly and regularly maintained which protects the value of your investment, minimises downtime and supports the efficiency of your processes.
The optional Dräger PolySoft Windows® software is used for configuration, firmware upgrades, diagnostics, and downloading the Polytron's built in datalogger. All from the comfort of your control room using the digital HART® signal that is modulated on top of the analog 4 – 20 mA signal. Out in the field, an available non-intrusive IR dongle easily connects Polytron to PolySoft.
Duct mount kit
The duct mount kit enables gas monitoring inside ventilation ducts while keeping the transmitter outside.
Flow cell
Function test/calibration of the transmitter in high wind forces and/ or high test gas concentration, including status display, suitable for process applications.
Process cuvette SGR
For sampling and in-line applications – reduces the inner volume of the measuring cuvette, thus providing a faster speed of response under flow conditions – made of stainless steel.
Splash guard
The Splash guard protects the sensor against splashes of water and dirt.
Downloads
—
Download product information, instructions for use and other important files.