4,4'-Methylene dianilineC13H14N2

Details
CAS-No.:101-77-9
UN-No.:2651
EC-No.:202-974-4
Hazard identification number:60
Warning sign
  • 60
  • 2651
Hazard signs
GHS06
GHS07
GHS08
GHS09
Occupational exposure limit
  • TWA (ppm) 0.01
  • TWA (mg/m3) 0.08
  • H: 317
    May cause an allergic skin reaction
  • H: 341
    Suspected of causing genetic defects. 
  • H: 350
    May cause cancer.
  • H: 370
    Causes damage to organs (or state all
    organs affected, if known) (state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard).
  • H: 373
    May cause damage to organs (state all organs affected, if known) through prolonged or repeated exposure (state route of exposure if it is conclusively
    proven that no other routes of exposure cause the hazard)
     .
  • H: 411
    Toxic to aquatic life with long lasting effects
Melting point:92 °C
Boiling Point:398 °C
Density (at 20 °C, if not notified otherwise):1,1 g/cm3
Ionization:7,20 eV
Flash Point:220 °C
Ignition Temperature:> 500 °C
Hazardous Effects:C, Ss, M
Important to know:
Substance of very high concern (SVHC) and included in the candidate list for authorisation. Substance of very high concern requiring authorisation before it is used (Annex XIV of REACH).Some uses of this substance are restricted under Annex XVII of REACH
diamond12 3

Details

Diamond-Red1Flammability: Flammable when heated 
Diamond-Yellow2Instability: Strong chemical reactions 
Diamond-Blue3Health: Very dangerous 
DG-EA:2Z
Also known as:
  • 4((4-aminophenyl)methyl)aniline
  • 4,4-Diaminodiphenylmethan
  • 4,4-Diaminodiphenylmethane
  • 4,4-Diphenylmethanediamine
  • 4,4-Methylenbisbenzamin
  • 4,4-Methylenedianiline
  • 4,4´-MDA
  • Benzenamine, 4,4-methylenebis-
  • Bis (4-aminophenyl)methane
  • Bis(4-aminophenyl)methane
  • BISANILINE, 4,4-METHYLENE-
  • DADIP
  • Dianilinomethane
  • MDA
  • MDA, Methylenedianiline, Diaminodiphenylmethane,
  • para
  • para-Diaminodiphenyl-methane

Suitable products for 4,4'-Methylene dianiline C13H14N2

Whether portable gas detectors, gas detection tubes or personal protective equipment - Dräger offers a comprehensive portfolio to protect you when handling hazardous substances.

Filters

Respirator filter Rd40

Dräger X-plore® Rd40

  • Respirator filter Rd40
  • ​standard thread connection Rd40 according to EN 148-1
  • robust aluminium housing
  • to be used with half and full face masks with standard thread connection Rd40 according to EN ...
Respirator filter Bayonet

Dräger X-plore® Bayonet

  • Respirator filter Bayonet
  • Dräger specific Bayonet connection
  • lateral position of the filters for an unrestricted field of vision and even weight distribution
  • to be used with X-plore 3300 or X-plore 3500 ...
Respirator filter Rd90

Dräger X-plore® Rd90 Filters

  • Respirator filter Rd90
  • ​Dräger specific Rd90 connection
  • robust aluminium housing
  • to be used in combination with X-plore 4700 half masks

Masks

Single-filter full-face mask

Dräger X-plore® 6570

  • Single-filter full-face mask
  • ​standard thread connection Rd40 according to EN 148-1
  • silicone mask body, visor made of triplex or PC
  • to be used with all filters with standard thread connection ...
Single-filter half-face mask

Dräger X-plore® 4700

  • Single-filter half-face mask
  • ​standard thread connection Rd40 according to EN 148-1
  • mask body made from TPE (universal size) or silicone (two sizes)
  • to be used with all filters with standard thread ...
Single-filter full-face mask

Dräger Panorama® Nova

  • Single-filter full-face mask
  • ​different thread connections: RA thread connection Rd40, PE thread connection M45x3, ESA plug-in connector, P Dräger plug-in connection
  • EPDM or silicone mask body, ...
Single-filter full-face mask

Dräger X-plore® 6530

  • Single-filter full-face mask
  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of triplex or PC
  • to be used with all filters with standard thread connection ...
Single-filter full-face mask

Dräger X-plore® 6300

  • Single-filter full-face mask
  • ​standard thread connection Rd40 according to EN 148-1
  • EPDM mask body, visor made of PMMA
  • to be used with all filters with standard thread connection Rd40
Twinfilter full-face mask

Dräger X-plore® 5500

  • Twinfilter full-face mask
  • ​Dräger specific bayonet connection – lateral position of the filters 
  • EPDM mask body, visor made of triplex or PC
  • to be used in combination with X-plore Bayonet ...
Twin-filter half-face mask

Dräger X-plore® 3300/3500

  • Twin-filter half-face mask
  • ​Dräger specific bayonet connection (twin-filter system)
  • mask body made from Soft-TPE or DrägerFlex material (silicon free)
  • to be used with X-plore Bayonet ...

Get in touch with Dräger

If you need further advice for the product selection or if you have not yet found what you want, get in touch with us, we'll find a solution for you.

Discover more: Dräger VOICE - The hazmat-based safety product finder

You know what - We know how! Our database provides you with basic information on more than 1,500 hazardous substances and guides you, according to a substance, to suitable gas detectors and protection equipment. Give it a try!

VOICE Hazmat